Anmin Li

Dr. Anmin Li


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 February 2024 in Materials
Verified
Journal Article
Open access
PDF file
YCYongliang Chen
Yongliang Chen
ALAnmin Li
Anmin Li
SJShiwei Jiang
Shiwei Jiang
In 2023, the global production of new red mud is expected to reach nearly 200 million tons, but less than 10% of it is currently being utilized in an environmentally friendly manner. To reduce the sintering temperature of alumina ceramics, a sintering aid method is used, as high-purity alumina ceramics require a solid-phase sintering temperature of over 1700 °C. The metal oxides present in red mud are necessary components for high-performance composite alumina ceramics. Composites were obtained by mixing and sintering red mud and Al2O3. This study focused on the mechanical properties and wettability of these composites. The results indicated that the 10% red mud–Al2O3 composite exhibited the highest hardness (20.12 GPa) and flexural strength (346 MPa). This is attributed to the formation of a mineral phase dominated by CaAl12O19, generated by the red mud during the sintering process, which filled the pores and reduced porosity. The surface energy of the red mud–Al2O3 composite was the highest at room temperature and high temperature, reaching 49.60 mJ·m−2 and 1164.7 mJ·m−2, respectively, indicating that it has better stability at both room and high temperatures. This study provides an important fundamental basis for the application of red mud–alumina composites to replace alumina-based composites in the field of construction materials, molten metal filters, ceramic cleavers, etc.

21 August 2024 in Materials
Verified
Journal Article
Open access
PDF file
XLXiang Li
Xiang Li
ALAnmin Li
Anmin Li
XQXiangdu Qin
Xiangdu Qin
HYHailong Yang
Hailong Yang
CPCheng Peng
Cheng Peng
The effects of the rare earth element La on the microstructure and mechanical properties of cast Al-5.4Cu-0.7Mg-0.6Ag alloys have been investigated through metallographic observation, scanning electron microscopy analysis, transmission electron microscopy, X-ray diffraction, and tensile testing. The present form and action mechanism of La have been analyzed. The findings indicate that the inclusion of trace amounts of La markedly diminishes the grain size in the Al-Cu-Mg-Ag alloy. Furthermore, as the La content increases, the alloy’s strength is significantly improved. When the La concentration reaches 0.4 wt.%, the mechanical properties of the alloy, both at room temperature and at 350 °C, surpass those of the alloy lacking rare earth elements. When the added rare earth La content exceeds 0.2 wt.%, the emergence of the Al6Cu6La phase causes the alloy structure to exhibit a skeletal morphology, altering the morphology and distribution of excess second phases along grain boundaries, thereby impacting the alloy’s overall performance. Incorporating La leads to a reduction in the size of the strengthening precipitate phase Ω while also enhancing its precipitation density, but an excess of La leads to the emergence of Al6Cu6La, depleting the available Cu and suppressing the precipitation of the Ω phase, ultimately affecting the mechanical properties of the alloy.

1 October 2021 in Journal of Physics: Conference Series
Verified
Conference Paper
Open access
PDF file
ALAnmin Li
Anmin Li
LWLinzhong Wang
Linzhong Wang
YHYang Hu
Yang Hu
TZTianchen Zuo
Tianchen Zuo
YWYu Wu
Yu Wu

24 July 2025 in Crystals
Verified
Journal Article
Open access
PDF file
GHGuoxian Hu
Guoxian Hu
ALAnmin Li
Anmin Li
AXAn Xia
An Xia
DZDongjie Zhang
Dongjie Zhang
LPLiwen Pan
Liwen Pan
Xinghi PangXinghi Pang
Xinghi Pang
With the continuous exploitation of bauxite mineral resources, Guangxi bauxite faces many difficulties in alumina production due to its characteristics of high silicon content, high iron content, and a low Al-Si ratio. In view of this, this study is closely related to the key link of bauxite pre-desiliconization and strives to break free from the status quo to improve the aluminum/silicon ratio and help optimize the subsequent alumina-refining process. In the work presented in this paper, the unique mineralogy of Guangxi bauxite was comprehensively considered, covering its complex mineral composition and fine distribution characteristics. The barium hydroxide pre-desilication technology was first used for in-depth experimental exploration, and the silicon removal efficiency under different working conditions was systematically compared. The system compared the silicon removal effect and the associated aluminum loss under different working conditions. The results of this study will lay a solid foundation for the rational and efficient development of bauxite in Guangxi, which is expected to reduce the cost of alumina production, improve the economic benefits for the Guangxi aluminum industry, simultaneously strengthen the efficiency of resource recycling, accelerate the sustainable development of the industry, and provide a useful reference example for subsequent similar studies.

2 February 2025 in Materials
Verified
Journal Article
Open access
PDF file
ZHZhuofang Huang
Zhuofang Huang
ALAnmin Li
Anmin Li
WZWendi Zhou
Wendi Zhou
JLJinjin Li
Jinjin Li
JZJinkai Zhang
Jinkai Zhang
The effects of red mud on the microstructures and high-temperature tensile properties of the ZL109 aluminum alloy have been investigated. Red mud/ZL109-based composite materials with added red mud (a major byproduct of the aluminum industry), which has been coated with nickel by chemical deposition, have been prepared through gravity casting. The results show that the addition of red mud promotes the alloy’s microstructure and helps to uniformly distribute the eutectic silicon. It also increases the content of heat-resistant phases, such as the Q-Al5Cu2Mg8Si6 and γ-Al7Cu4Ni phases. These changes significantly enhance the alloy’s high-temperature tensile properties. The alloy with 1% (wt.%) red mud exhibits the best tensile strength at both room temperature and 350 °C, reaching 295.4 MPa and 143.3 MPa, respectively. The alloy with 1.5% (wt.%) red mud demonstrates excellent performance at 400 °C, achieving a tensile strength of 86.2 MPa through the cut-through method and Orowan mechanism. As a reinforcing material, red mud not only improves the high-temperature resistance of the aluminum alloy but also provides a way to recycle industrial waste. This study offers a new way to address the red mud waste problem and helps develop high-performance, heat-resistant aluminum alloys. It shows the potential of these alloys in high-temperature applications.

14 January 2025 in Crystals
Verified
Journal Article
Open access
PDF file
XQXiangdu Qin
Xiangdu Qin
ALAnmin Li
Anmin Li
XLXiang Li
Xiang Li
The effects of rare earth Y on the microstructures and tensile properties of ZL109 alloys were studied through metallographic observation, scanning electron microanalysis, X-ray diffraction, and tensile experiments, and the existence form and mechanism of Y were analyzed. The results show that the grain size of the ZL109 alloy is obviously reduced and that the strength of the ZL109 alloy is significantly increased after adding the Y element. When the Y content is increased to 0.2 wt.%, the tensile properties of the ZL109 alloy at room temperature and 350 °C are better than those without a rare earth addition, and the comprehensive tensile properties are better. This is due to the addition of the Y element; α-Al dendrites are obviously refined, and there is a tendency for them to change into fine isometric crystals. The size of the eutectic Si decreases, and its shape is modified. The morphology and size of high temperature enhanced phases, such as Al3CuNi, are optimized. The heat-resistant enhanced phase Al2Si2Y is formed after the addition of rare earth Y. However, with the addition of the Y element, the Al2Si2Y phase increases, and coarsening results in the decrease in alloy strength.