Research on natural-fiber-reinforced polymer composite is continuously developing. Natural fibers from flora have received considerable attention from researchers because their use in biobased composites is safe and sustainable for the environment. Natural fibers that mixed with Carbon Fiber and or Glass Fiber are low-cost, lightweight, and biodegradable and have lower environmental influences than metal-based materials. This study highlights and comprehensively reviews the natural fibers utilized as reinforcements in polyester composites, including jute, bamboo, sisal, kenaf, flax, and banana. The properties of composite materials consisting of natural and synthetic fibers, such as tensile strength, flexural strength, fatigue, and hardness, are investigated in this study. This paper aims to summarize, classify, and collect studies related to the latest composite hybrid science consisting of natural and synthetic fibers and their applications. Furthermore, this paper includes but is not limited to preparation, mechanism, characterization, and evaluation of hybrid composite laminates in different methods and modes. In general, natural fiber composites produce a larger volume of composite, but their strength is weaker than GFRP/CFRP even with the same number of layers. The use of synthetic fibers combined with natural fibers can provide better strength of hybrid composite.

The study investigates the fabrication and analysis of nickel microparticle-reinforced composites fabricated using the digital light processing (DLP) technique. A slurry is prepared by incorporating Ni-micro particles into a resin vat; it is thoroughly mixed to achieve homogeneity. Turbidity fluctuations are observed, initially peaking at 50% within the first two minutes of mixing and then stabilizing at 30% after 15–60 min. FTIR spectroscopy with varying Ni wt.% is performed to study the alterations in the composite material’s molecular structure and bonding environment. Spectrophotometric analysis revealed distinctive transmittance signatures at specific wavelengths, particularly within the visible light spectrum, with a notable peak at 532 nm. The effects of printing orientation in the X, Y, and Z axes were also studied. Mechanical properties were computed using tensile strength, surface roughness, and hardness. The results indicate substantial enhancements in the tensile properties, with notable increases of 75.5% in the ultimate tensile strength and 160% in the maximum strain. Minimal alterations in surface roughness and hardness suggest favorable printability. Microscopic examination revealed characteristic fracture patterns in the particulate composite at different values for the wt.% of nickel. The findings demonstrate the potential of DLP-fabricated Ni-reinforced composites for applications demanding enhanced mechanical performance while maintaining favorable printability, paving the way for further exploration in this domain.

The world of design nowadays is heavily inspired by nature, primarily due to its efficiency and effectiveness. This paper aims to be able to implement a well-es The world of design nowadays is heavily inspired by nature, primarily due to its efficiency and effectiveness. This paper aims to be able to implement a well-es