Phasor Measurement Units have become more and more interesting for monitoring applications in distribution grids. For a large exploitation in medium and low voltage networks, however, a limited cost is required. Such specification, however, should not impact excessively the accuracy requirements, as it is expected that automatic control functionalities will run based on state estimation algorithms, which can be fed by PMU information. In this paper the design of a low cost PMU for distribution grids is proposed, and tested versus the IEEE c37.118.1-2011 standard for accuracy. The development of the low cost PMU is part of the Modular Intelligent Node (MIND) project, where distribution grid components and functionalities are implemented as modular interconnected nodes that run on general purpose hardware.

The latest technological developments are challenging for finding new solutions to mitigate the massive integration of renewable-based electricity generation in the electrical networks and to support new and dynamic energy and ancillary services markets. Smart meters have become ubiquitous equipment in the low voltage grid, enabled by the decision made in many countries to support massive deployments. The smart meter is the only equipment mandatory to be mounted when supplying a grid connected user, as it primarily has the function to measure delivered and/or produced energy on its common coupling point with the network, as technical and legal support for billing. Active distribution networks need new functionalities, to cope with the bidirectional energy flow behaviour of the grid, and many smart grid requirements need to be implemented in the near future. However there is no real coupling between smart metering systems and smart grids, as there is not yet a synergy using the opportunity of the high deployment level in smart metering. The paper presents a new approach for managing the smart metering and smart grid orchestration by presenting a new general design based on an unbundled smart meter (USM) concept, labelled as next generation open real-time smart meters (NORM), for integrating the smart meter, phasor measurement unit (PMU) and cyber-security through an enhanced smart metering gateway (SMG). NORM is intended to be deployed everywhere at the prosumer’s interface to the grid, as it is usually now done with the standard meter. Furthermore, rich data acquired from NORM is used to demonstrate the potential of assessing grid data inconsistencies at a higher level, as function to be deployed in distribution security monitoring centers, to address the higher level cyber-security threats, such as false data injections and to allow secure grid operations and complex market activities at the same time. The measures are considering only non-sensitive data from a privacy perspective, and is therefore able to be applied everywhere in the grid, down to the end-customer level, where a citizen’s personal data protection is an important aspect.

The growing demand of energy and the need of finding alternative energy sources to the traditional ones, due to the progressive decrease of fossil fuels and an increasing concern towards the environment, have led to a revolution in terms of energy production in the last decade. As a consequence, the distributed generation is more and more widely spreading. The network, in this new dimension, has to change its management and the energy distribution so to achieve and maintain high efficiency requirements. Coming to drop the concept of centralized production, it is immediate to conclude that an efficient distribution of energy must necessarily bring into account the energy footprint of the area, because the energy transport should be always as short as possible, to minimize losses and maximize the efficiency of the network. This concept is the core of the smart-grid idea, on which the global scientific community is investing heavily in research, the idea is a power distribution grid, based on the experience in the information and communications technology field, which can route the energy through appropriate algorithms that are able to determine the optimal path. Of course, behind all this there must be a network structure capable of acquiring detailed data from widespread production and consumption of energy and make them easily available along with additional information, e.g. the Power Quality of the energy exchanged. This information is demanded by simple user, who wants to personally evaluate the functioning of the system, and also by technical personnel, who needs to access to reliable data to perform targeted and efficient interventions. In the present paper, the authors propose a smart energy meter for energy management in power grids. The measurement system has been projected and developed according to the IEEE 1451 (ISO/IEC/IEEE 21451) guidelines. The system is based on a mobile application in order to improve the data exchange and availability.