Lamb wave-based damage detection technology shows great potential for structural integrity assessment. However, conventional damage features based damage detection methods and data-driven intelligent damage detection methods highly rely on expert knowledge and sufficient labeled data for training, for which collecting is usually expensive and time-consuming. Therefore, this paper proposes an automated fatigue crack detection method using Lamb wave based on finite element method (FEM) and adversarial domain adaptation. FEM-simulation was used to obtain simulated response signals under various conditions to solve the problem of the insufficient labeled data in practice. Due to the distribution discrepancy between simulated signals and experimental signals, the detection performance of classifier just trained with simulated signals will drop sharply on the experimental signals. Then, Domain-adversarial neural network (DANN) with maximum mean discrepancy (MMD) was used to achieve discriminative and domain-invariant feature extraction between simulation source domain and experiment target domain, and the unlabeled experimental signals samples will be accurately classified. The proposed method is validated by fatigue tests on center-hole metal specimens. The results show that the proposed method presents superior detection ability compared to other methods and can be used as an effective tool for cross-domain damage detection.
Impact indentation is believed to be an effective indication of low-velocity impact (LVI) damage for polymer matrix composites. However, it has been discovered that an indentation can partially rebound over time. Impact indentation and its rebound behavior over a period of time are significantly affected by hygrothermal conditions, especially moisture absorption. Therefore, a good understanding of the moisture-dependent impact indentation and its rebound behavior is helpful for impact damage assessment for composites. In this paper, moisture effects are considered for both the intra-laminar transverse property model and the interlaminar interface model in the simulation of impact indentation. Then, in these two models, viscosities are introduced to represent the indentation rebound over time. In order to validate the proposed models, LVI experiments with different impact energies were conducted on dry and hygrothermal conditioned carbon fiber/epoxy matrix composite laminates. For the specimens, the initial depths of impact dents and their rebounds over time were measured. The specimens of hygrothermal conditions were found with deeper dents compared with dry ones under the same impact energy; and their rebounds were also more significant. These phenomena were explained by the fact that moisture softens epoxy in composite and meanwhile elevates its viscosity. This indentation and its rebound phenomenon were simulated in ABAQUS by considering the moisture effects and viscoelasticity with user-defined material subroutines. These experiments were simulated using the proposed models, and the numerical predictions conformed well with the experimental observations.
The Lamb wave-based damage detection method shows great potential for composite impact failure assessments. However, the traditional single signal feature-based methods only depend on partial structural state monitoring information, without considering the inconsistency of damage sensitivity and detection capability for different signal features. Therefore, this paper proposes a damage fusion detection method based on distance analysis and evidence theory for composite laminate panels. Firstly, the signal features of different dimensions are extracted from time–frequency domain perspectives. Correlational analysis and cluster analysis are applied to achieve feature reduction and retain highly sensitive signal features. Secondly, the damage detection results of highly sensitive features and the corresponding basic probability assignments (BPAs) are acquired using distance analysis. Finally, the consistent damage detection result can be acquired by applying evidence theory to the decision level to fuse detection results for highly sensitive signal features. Impact tests on ten composite laminate panels are implemented to validate the proposed fusion detection method. The results show that the proposed method can accurately identify the delamination damage with different locations and different areas. In addition, the classification accuracy is above 85%, the false alarm rate is below 25% and the missing alarm rate is below 15%.