In this paper, a reconfigurable intelligent surface (RIS)-aided millimeter wave (mmWave) non-orthogonal multiple access (NOMA) system is analyzed. In particular, we consider an RIS-aided mmWave-NOMA downlink system with a hybrid beamforming structure. To maximize the achievable sum-rate under a minimum rate constraint for the users and a maximum transmit power constraint, a joint RIS phase shifts, hybrid beamforming, and power allocation problem is formulated. To solve this non-convex optimization problem, we develop an alternating optimization (AO) algorithm. Specifically, first, the non-convex problem is transformed into three subproblems, i.e., power allocation, joint phase shifts and analog beamforming optimization, and digital beamforming design. Then, we solve the power allocation problem by keeping fixed the phase shifts of the RIS and the hybrid beamforming. Finally, given the power allocation matrix, an alternating manifold optimization (AMO)-based method and a successive convex approximation (SCA)-based method are utilized to design the phase shifts, analog beamforming, and transmit beamforming, respectively. Numerical results reveal that the proposed AO algorithm outperforms existing schemes in terms of sum-rate. Moreover, compared to a conventional mmWave-NOMA system without RIS, the proposed RIS-aided mmWave-NOMA system is capable of improving the achievable sum-rate.

For millimeter-wave (mmWave) non-orthogonal multiple access (NOMA) communication systems, we propose an innovative near-field (NF) transmission framework based on dynamic metasurface antenna (DMA) technology. In this framework, a base station (BS) utilizes the DMA hybrid beamforming technology combined with the NOMA principle to maximize communication efficiency between near-field users (NUs) and far-field users (FUs). In conventional communication systems, obtaining channel state information (CSI) requires substantial pilot signals, significantly reducing system communication efficiency. We propose a beamforming design scheme based on position information to address with this challenge. This scheme does not depend on pilot signals but indirectly obtains CSI by analyzing the geometric relationship between user position information and channel models. However, in practical applications, the accuracy of position information is challenging to guarantee and may contain errors. We propose a robust beamforming design strategy based on the worst-case scenario to tackle this issue. Since this problem is a multi-variable coupled non-convex problem, we employ a dual-loop iterative joint optimization algorithm to update beamforming using block coordinate descent (BCD) and derive the optimal power allocation (PA) expression. We analyze its convergence and complexity to verify the proposed algorithm’s performance and robustness thoroughly. We validate the theoretical derivation of the CSI error bound through simulation experiments. Numerical results show that our proposed scheme performs better than traditional beamforming schemes. Additionally, the transmission framework exhibits strong robustness to NU and FU position errors, laying a solid foundation for the practical application of mmWave NOMA communication systems. The NF transmission framework for mmWave NOMA communication systems based on DMA technology proposed in this work shows significant advantages in improving communication sum rate, reducing reliance on pilot signals, and coping with position errors. This provides new insights for the future development of mmWave NOMA communication technology.

Cooperative-integrated sensing and communication (C-ISAC) networks have emerged as promising solutions for communication and target sensing. However, imperfect channel state information (CSI) estimation and time synchronization (TS) errors degrade performance, affecting communication and sensing accuracy. This paper addresses these challenges by employing movable antennas (MAs) to enhance C-ISAC robustness. We analyze the impact of CSI errors on achievable rates and introduce a hybrid Cramer-Rao lower bound (HCRLB) to evaluate the effect of TS errors on target localization accuracy. Based on these models, we derive the worst-case achievable rate and sensing precision under such errors. We optimize cooperative beamforming, base station (BS) selection factor and MA position to minimize power consumption while ensuring accuracy. We then propose a constrained deep reinforcement learning (C-DRL) approach to solve this non-convex optimization problem, using a modified deep deterministic policy gradient (DDPG) algorithm with a Wolpertinger architecture for efficient training under complex constraints. To the best of our knowledge, this is the first work that jointly integrates TS errors and imperfect CSI into a unified MA-aided cooperative ISAC framework, providing a physically consistent model for both communication and sensing under dual uncertainties. Simulation results show that the proposed method significantly improves system robustness against CSI and TS errors, where robustness mean reliable data transmission under poor channel conditions. These findings demonstrate the potential of MA technology to reduce power consumption in imperfect CSI and TS environments.

The cell-free integrated sensing and communication (CF-ISAC) system, which effectively mitigates intra-cell interference and provides precise sensing accuracy, is a promising technology for future 6G networks. However, to fully capitalize on the potential of CF-ISAC, accurate time synchronization (TS) between access points (APs) is critical. Due to the limitations of current synchronization technologies, TS errors have become a significant challenge in the development of the CF-ISAC system. In this paper, we propose a novel CF-ISAC architecture based on movable antennas (MAs), which exploits spatial diversity to enhance communication rates, maintain sensing accuracy, and reduce the impact of TS errors. We formulate a worst-case sensing accuracy optimization problem for TS errors to address this challenge, deriving the worst-case Cramér-Rao lower bound (CRLB). Subsequently, we develop a joint optimization framework for AP beamforming and MA positions to satisfy communication rate constraints while improving sensing accuracy. A robust optimization framework is designed for the highly complex and non-convex problem. Specifically, we employ manifold optimization (MO) to solve the worst-case sensing accuracy optimization problem. Then, we propose an MA-enabled meta-reinforcement learning (MA-MetaRL) to design optimization variables while satisfying constraints on MA positions, communication rate, and transmit power, thereby improving sensing accuracy. The simulation results demonstrate that the proposed robust optimization algorithm significantly improves the accuracy of the detection and is strong against TS errors. Moreover, compared to conventional fixed position antenna (FPA) technologies, the proposed MA-aided CF-ISAC architecture achieves higher system capacity, thus validating its effectiveness.

This paper investigates a novel unmanned aerial vehicle (UAV) secure communication system with integrated sensing and communications. We consider wireless security enhancement for a multiple-antenna UAV transmitting ISAC waveforms to communicate with multiple ground Internet-of-Thing devices and detect the surrounding environment. Specifically, we aim to maximize the average communication secrecy rate by optimizing the UAV trajectory and beamforming vectors. Given that the UAV trajectory optimization problem is non-convex due to multi-variable coupling develop an efficient algorithm based on the successive convex approximation (SCA) algorithm. Numerical results show that our proposed algorithm can ensure the accuracy of sensing targets and improve the communication secrecy rate.

In this letter, we investigate the uplink of a reconfigurable intelligent surface (RIS)-aided millimeter-wave (mmWave) multi-user system. In the considered system, however, problems with hardware cost and power consumption arise when massive antenna arrays coupled with power-demanding analog-to-digital converters (ADCs) are employed. To account for practical hardware complexity, we consider that the access point (AP) is equipped with resolution-adaptive analog-to-digital converters (RADCs). We maximize the achievable rate under hardware constraints by jointly optimizing the ADC quantization bits, the RIS phase shifts, and the beam selection matrix. The formulated problem is non-convex. To efficiently tackle this problem, a block coordinated descent (BCD)-based algorithm is proposed. Simulations demonstrate that an RIS can mitigate the hardware loss due to the use of RADCs, and that the proposed BCD-based algorithm outperforms state-of-the-art algorithms.