Marianne Richou

Dr. Marianne Richou


Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 September 2021 in Nuclear Fusion
Verified
Journal Article
Closed access
PDF file
MDMathilde Diez
Mathilde Diez
YCYann Corre
Yann Corre
EDEtienne Delmas
Etienne Delmas
NFNicolas Fedorczak
Nicolas Fedorczak
MFMehdi Firdaouss
Mehdi Firdaouss
TTthe WEST Team
the WEST Team

7 September 2021 in Physica Scripta
Verified
Journal Article
Open access
MBM Balden
M Balden
MMMatej Mayer
Matej Mayer
BBB Bliewert
B Bliewert
EBElodie Bernard
Elodie Bernard
MDM Diez
M Diez
AHAntti Hakola
Antti Hakola
The net erosion and deposition patterns in the inner and outer divertor of WEST were determined after different experimental campaigns (C3 and C4) of the first operational phase using ion beam analyses and scanning electron microscopy techniques. The analyses were performed on four entire tiles from inertially cooled, W-coated divertor units with an additional Mo marker coating covered with a further W coating. Strong erosion occurred at the expected location of the inner and outer strike line area with a campaign-averaged net erosion rate of >0.1 nm s−1. On the high field side of the inner strike line area, thick deposited layers were found (>10 μm; growth rate >1 nm s−1), mainly composed of B, C, O, and W. Additionally, strong arcing was observed in this region. At the end of the C4 campaign, He discharges were performed to study the He-W interaction. Although the conditions for nanotendrils, i.e. fuzz formation were fulfilled around the outer strike line position, neither nanotendrils nor He bubbles (>10 nm) were observed at this area.

8 November 2021 in Physica Scripta
Verified
Journal Article
Closed access
YCY Corre
Y Corre
AGA Grosjean
A Grosjean
JGJ P Gunn
J P Gunn
KKK Krieger
K Krieger
SRS Ratynskaia
S Ratynskaia
ETE Tsitrone
E Tsitrone
The consequences of tungsten (W) melting on divertor lifetime and plasma operation are high priority issues for ITER. Sustained and controlled W-melting experiment has been achieved for the first time in WEST on a poloidal sharp leading edge of an actively cooled ITER-like plasma facing unit (PFU). A series of dedicated high power steady state plasma discharges were performed to reach the melting point of tungsten. The leading edge was exposed to a parallel heat flux of about 100 MW.m −2 for up to 5 s providing a melt phase of about 2 s without noticeable impact of melting on plasma operation (radiated power and tungsten impurity content remained stable at constant input power) and no melt ejection were observed. The surface temperature of the MB was monitored by a high spatial resolution (0.1 mm/pixel) infrared camera viewing the melt zone from the top of the machine. The melting discharge was repeated three times resulting in about 6 s accumulated melting duration leading to material displacement from three similar pools. Cumulated on the overall sustained melting periods, this leads to excavation depth of about 230 μ m followed by a re-solidified tungsten bump of 200 μ m in the JxB direction.

24 October 2017 in Physica Scripta
Verified
Journal Article
Open access
PDF file
MFM Fursdon
M Fursdon
TBT Barrett
T Barrett
FDF Domptail
F Domptail
LELl M Evans
Ll M Evans
NLN Luzginova
N Luzginova
EVE Visca
E Visca

1 April 2014 in Physica Scripta
Verified
Journal Article
Closed access
EAE Autissier
E Autissier
MRMarianne Richou
Marianne Richou
LML Minier
L Minier
FNF Naimi
F Naimi
GPG Pintsuk
G Pintsuk
FBF Bernard
F Bernard

1 March 2020 in Review of Scientific Instruments
Verified
Journal Article
Closed access
PDF file
MMMarco Minissale
Marco Minissale
ADA. Durif
A. Durif
PHP. Hiret
P. Hiret
TVT. Vidal
T. Vidal
JFJ. Faucheux
J. Faucheux
laurent gallaislaurent gallais
laurent gallais
The knowledge of material properties and their behavior at high temperatures is of crucial importance in many fields. For instance, annealing phenomena occurring during the thermomechanical processing of materials, such as recrystallization, have long been recognized as being both of scientific interest and technological importance. Different methods are currently used to study annealing phenomena and submit metals to heat loads. In this work, we present the design and the development of a laser-based facility for annealing tests. This experimental setup enables studies at the laboratory scale with great flexibility to submit samples to various spatial and temporal heating profiles. Due to the possibility of having optical access to the sample, laser heating can be combined with several non-contact diagnostics such as infrared imaging to control and analyze the temperature gradients. As a case study, we present a set of experiments performed to study the recrystallization kinetics of tungsten. We demonstrate that samples can be heated linearly with heating rate up to ∼2000 K/s, at temperatures above 2000 K, for seconds or hours, with typical errors in the temperature measurement of around 1% that depend mainly on the determination of sample emissivity. Such studies are of crucial interest in the framework of nuclear fusion since the international thermonuclear experimental reactor nuclear reactor will operate with a full-W divertor.