Fused filament fabrication (FFF) or fused deposition modeling is an additive manufacturing (AM) process commonly used for geometric modeling and rapid prototyping of parts called three-dimensional (3-D) printing. Commonly used thermoplastic materials in FFF 3-D printing AM are acrylonitrile butadiene styrene (ABS), polylactic acid (PLA), and polybutylene terephthalate (PBT). However, these materials exhibit relatively low strength and toughness. Therefore, it is desirable to improve various properties of thermoplastics in 3-D printing AM by employing nanotechnology. The combination of 3-D printing and nanotechnology opens new venues for the manufacture of 3-D engineered materials with optimized properties and multifunctionality (e.g. mechanical, electrical, and thermal properties). Hence, in this work, the multifunctional property improvement effects of graphene oxide (GO) on thermoplastic materials suitable for 3-D printing AM are investigated. Low loading of GO with carboxyl and hydroxyl surface functional groups is incorporated into thermoplastic materials suitable for 3-D printing AM by a special mixing technique. ABS is chosen in this study due to its availability. Graphene nanosheets are employed to improve the properties of the developed nanocomposites by 3-D printing AM. GO is chosen to improve the dispersion of graphene nanosheets into the thermoplastic system to increase their interfacial adhesion. A multifunctional property improvement is observed in the developed nanocomposite with less than 0.1 wt% GO. Employing ASTM standard tests, it was found that at a very small loading of 0.06% by weight, GO could improve the properties of the thermoplastic in terms of strength, strain-to-failure, and toughness, while maintaining the stiffness, rendering the developed nanocomposites suitable for various applications of static and dynamic loading. GOs are now commercially available at low prices. At such low loadings, these graphene-type materials become economically feasible components of nanocomposites.
The effect of the maritime environment on radio frequency (RF) propagation is not well understood. In this work, we study the propagation of ad hoc 2.4 GHz and 5 GHz wireless local area network systems typically used for near-shore operation of unmanned surface vehicles. In previous work, maritime RF propagation performance is evaluated by collecting RSSI data over water and comparing it against existing propagation models. However, the multivariate effect of the maritime environment on RF propagation means that these single-domain studies cannot distinguish between factors unique to the maritime environment and factors that exist in typical terrestrial RF systems. In this work, we isolate the effect of the maritime environment by collecting RSSI data over land and over seawater at two different frequencies and two different ground station antenna heights with the same physical system in essentially the same location. Results show that our 2.4 GHz, 2 m antenna height system received a 2 to 3 dBm path loss when transitioning from over-land to over-seawater (equivalent to a 25 to 40% reduction in range); but increasing the frequency and antenna height to 5 GHz, 5 m respectively resulted in no meaningful path loss under the same conditions; this reduction in path loss by varying frequency and antenna height has not been demonstrated in previous work. In addition, we studied the change in ground reflectivity coefficient, , when transitioning from over-land to over-seawater. Results show that remained relatively constant, −0.49 ≤ R ≤ −0.45, for all of the over-land experiments; however, R demonstrated a frequency dependence during the over-seawater experiments, ranging from −0.39 ≤ R ≤ −0.33 at 2.4 GHz, and −0.51 ≤ R ≤ −0.50 at 5 GHz.
Effective testing of new sensing technologies requires realistic yet deterministic test ranges. The advancements in customizable, adaptive unmanned surface vessels (USV) have contributed to the increasing presence of USVs completing maritime site characterizations of test ranges using commercial off-the-shelf (COTS) sensors such as the Tritech Starfish 990F side-scan sonar. This paper aims to present recommendations for the electromechanical integration of a COTS sonar system onto a capable USV through passive techniques such that underwater objects within the littoral zone of Sand Island, Hawaii, are characterized. Results demonstrated a 49% improvement in the sonar images. Therefore, designers are recommended to fully isolate the sensing system from the USV, physically separate the sonar and USV components, and to establish a baseline performance for the system prior to operation.
28 July 2016 in Journal of Manufacturing Science and Engineering
The expanding use of materials that are difficult to join with traditional techniques drives an urgent need, in a wide array of industries, to develop and characterize production capable joining processes. Friction stir blind riveting (FSBR) is such a process. However, full adoption of FSBR requires more complete characterization of the process. The relatively inexpensive, portable FSBR machine discussed here facilitates in situ X-ray imaging of the FSBR process, which will enhance the ability of researchers to understand and improve the FSBR process. Real-time, unobstructed, angular X-ray access drives the functional requirements and design considerations of the machine. The acute angular access provided by the machine necessitates tradeoffs in stiffness and Abbe errors. An error budget quantifies the effect of the various trade-offs on likely sensitive directions and relationships. Additionally, the machine motivates more test parameters important to machine designers (e.g., parallelism and runout) that have not yet been explored in the literature. Ultimately, a machine has been developed, which has a single rotational axis that translates parallel to the rotational axis, can be built for under $12,000, has a mass of less than 110 kg, measures 915 mm × 254 mm × 624 mm, has a rotational speed range of 400–8000 RPM, has a feed rate range of 0.1–200 mm/min, can be installed on most test benches, has total rivet runout of 0.1 mm, has plunge and rotational axis parallelism of less than 0.1 deg, and has a plunge axis repeatability of better than 2 m over a 10 mm range.
The objective of this paper is to describe the design and function of the multisplit ventilator system (MSVS); an airflow apparatus that enables physicians to provide individualized, isolated ventilation to up to four patients using a single ventilator. Method: The study design is laboratory assessment of the ability of the MSVS to decouple the pressures and resulting tidal volumes between patient limbs in response to adverse extubation (disconnection) or endotracheal tube occlusion of one of the patients in the system. We compare the airflow decoupling of the MSVS against an existing unregulated split ventilator system (USVS) design over eight prototypical patient pairs. Simulated patient prototypes of varying size, minute ventilation requirement, and positive end-expiratory pressure (PEEP) requirement were employed. Result: Respiratory support was developed for varying simulated patient pairs using the MSVS and a USVS. The results demonstrate that patients supported with the MSVS showed significantly smaller changes to tidal volume and PEEP after extubation events, and tidal volume after occlusion events. Conclusion: It was found that the MSVS as a regulated, shared ventilator system effectively buffered simulated patients from clinical changes occurring to another patient connected to the split ventilator. This decoupling ability resulted in significantly smaller changes in delivered support when compared to existing USVS designs, which is an important patient safety consideration if deciding to support multiple patients with a single ventilator.
1 May 2017 in International Oil Spill Conference Proceedings
A marine pollutant spill environmental model that can accurately predict fine scale pollutant concentration variations on a free surface is needed in early stages of testing robotic control systems for tracking pollutant spills. The model must reproduce, for use in a robotic control system simulation environment, the fine-scale surface concentration variations observed by a robot. Furthermore, to facilitate development of robotic control systems, the model must reproduce sample spill distributions in minimal computational time. A combination Eulerian-Lagrangian type model, with two tuning parameters, was developed to produce, with minimal computational effort, the fine scale concentrations that would be observed by a robot. Multiple model scenarios were run with different tuning parameters to determine the effects of those parameters on the model’s ability to reproduce an experimental measured pollutant plume’s structure. A qualitative method for analyzing the concentration variations was established using amplitude and temporal statistical parameters. The differences in the statistical parameters between the model and experiment vary from 69%–316%. After tuning, the model produces a sample spill, which includes a high frequency concentration component not observed in the experimental data, but that generally represents the real-time, fine scale pollutant plume structure and can be used for testing control algorithms.