A marine pollutant spill environmental model that can accurately predict fine scale pollutant concentration variations on a free surface is needed in early stages of testing robotic control systems for tracking pollutant spills. The model must reproduce, for use in a robotic control system simulation environment, the fine-scale surface concentration variations observed by a robot. Furthermore, to facilitate development of robotic control systems, the model must reproduce sample spill distributions in minimal computational time. A combination Eulerian-Lagrangian type model, with two tuning parameters, was developed to produce, with minimal computational effort, the fine scale concentrations that would be observed by a robot. Multiple model scenarios were run with different tuning parameters to determine the effects of those parameters on the model’s ability to reproduce an experimental measured pollutant plume’s structure. A qualitative method for analyzing the concentration variations was established using amplitude and temporal statistical parameters. The differences in the statistical parameters between the model and experiment vary from 69%–316%. After tuning, the model produces a sample spill, which includes a high frequency concentration component not observed in the experimental data, but that generally represents the real-time, fine scale pollutant plume structure and can be used for testing control algorithms.
Pollution plume monitoring using autonomous vehicles is important due to the adverse effect of pollution plumes on the environment and associated monetary losses. Using the advection-diffusion plume dispersion model, we present a control law design to track dynamic concentration level curves. We also present a gradient and divergence estimation method to enable this control law from concentration measurement only. We then present the field testing results of the control law to track concentration level curves in a plume generated using Rhodamine dye as a pollution surrogate in a near-shore marine environment. These plumes are then autonomously tracked using an unmanned surface vessel equipped with fluorometer sensors. Field experimental results are shown to evaluate the performance of the controller, and complexities of field experiments in real-world marine environments are discussed in the paper.