The majority of classical methods which analyze the stability of existing cracks are based on theorems which calculate the forces in a state of limit equilibrium and do not take into consideration the deformation of the structure and the internal constraints thereof. This is not entirely consistent with what exactly happens in reality. For this purpose, we have proposed this study which analyzes the stability of cracks by the stress intensity factor through the calculation of the J-Integral, which is used in the calculation of the stress intensity factor. The stress intensity factor is a mechanical parameter, its values play a very important role in predicting the cracked state of the structure, and when it takes a certain value which is equal to the toughness of the material, the crack will cause the rupture of the structure. There are several methods for calculating the stress intensity factor. We have chosen to calculate it using the energy method because the direct calculation of the latter poses a problem because of the secularity of the flow around the crack. In this paper, we used the J-Integral and the energy release time to calculate the stress intensity factor. We also calculated using the laws of country the growth rate and the necessary number of cycles for the propagation of a crack.
The purpose of the present paper is to numerically investigate the steady flow of Herschel–Bulkley fluid through thin layers in order to analyze the behavior of the rigid zones. This study establishes correlations between the measure of rigid zones, the yield stress, and the layer thickness. The results show that the increase in the yield stress leads to a large expansion of rigid zones, which becomes larger as the layer becomes thinner. Moreover, the occupancy rate and the spatial distribution of the unyielded regions within the flow domain are illustrated, showing the trend of growth of these areas until reaching an upper limit. In addition, the flow is examined under both velocity and pressure boundary conditions, which allows us to demonstrate that the blocking phenomenon corresponding to the total solidification of the flow domain occurs in the pressure-driven case, while it cannot be reached when the flow is governed by imposed velocity.