This study has used the strain energy density (SED) approach to evaluate the stress intensity factor (SIF) of cracked cruciform welded joints in Hardox 450 steel. A microstructural analysis was made of Hardox 450 steel which is composed of refined and tempered low carbon martensite. The obtained results of simulation will be compared with those provided by J-integral methode for different enriched zones and contours based on the extended finite element method (XFEM) coupled with the level set technique (LST). Crack initiation and propagation under cyclic loading have been adopted for the modeling of cruciform welded joints.
The majority of classical methods which analyze the stability of existing cracks are based on theorems which calculate the forces in a state of limit equilibrium and do not take into consideration the deformation of the structure and the internal constraints thereof. This is not entirely consistent with what exactly happens in reality. For this purpose, we have proposed this study which analyzes the stability of cracks by the stress intensity factor through the calculation of the J-Integral, which is used in the calculation of the stress intensity factor. The stress intensity factor is a mechanical parameter, its values play a very important role in predicting the cracked state of the structure, and when it takes a certain value which is equal to the toughness of the material, the crack will cause the rupture of the structure. There are several methods for calculating the stress intensity factor. We have chosen to calculate it using the energy method because the direct calculation of the latter poses a problem because of the secularity of the flow around the crack. In this paper, we used the J-Integral and the energy release time to calculate the stress intensity factor. We also calculated using the laws of country the growth rate and the necessary number of cycles for the propagation of a crack.
8 January 2026 in International Journal of Applied Mechanics