Drilling to relieve pressure is a simple and efficient solution to prevent impact ground pressure for the engineering problem of the high risk of impact on the surrounding rock of high stress roads, and choosing suitable drilling parameters is the key to it. The unloading law of borehole diameter, depth, and spacing was investigated using a combination of indoor tests, numerical simulations, and theoretical analysis. The characteristics of crack extension and plastic zone changes of the three were analyzed, and the relationship between boreholes and elastic strain energy was derived by developing a hole mechanics model. The findings indicate that as drilling radius and depth are increased, peak strength and the elastic strain energy stored in front of the peak decrease, the plastic zone around the hole and the main control crack on the surface of the block expand more obviously, and the vertical stress at the top and bottom of the hole decrease, and the peak stress increases with the depth of the hole. The plastic zone surrounding the hole is attached to one another more easily the closer the drilling spacing is. The test block is changed from independent damage to penetrating damage when the drilling spacing is less than or equal to 3.286 cm. However, the pressure release effect does not necessarily improve with narrower drilling spacing. The plastic zone radius and the elastic strain energy held in the rock body are linked to each other linearly and quadratically, respectively, by the drilling radius. The joint pressure relief of several holes should be prioritized when drilling pressure is relieved, and then the hole’s diameter should be increased, and, finally, the hole’s depth should be increased. A reference for engineering applications is provided by this.
14 March 2023 in KSCE Journal of Civil Engineering
In order to study the mechanism of radial gradient damage of surrounding rock caused by deep elevated stress coal roadway excavation, a triaxial loading unloading uniaxial reloading coal sample damage test was carried out. Based on the defined damage factor and fractal theory, the wave velocity damage characteristics, fracture characteristics, three-dimensional fractal characteristics and uniaxial reloading strength characteristics of coal samples under different loading unloading paths were studied. The results show that the shift of wave velocity can better reflect the damage of coal samples. Under the same confining pressure, the damage amount of coal samples increases with the axial compression ratio index, and the confining pressure can inhibit the damage of coal samples to a certain extent; the fracture characteristics of coal samples are closely related to the loading history. The surface cracks of coal samples tend to become complex with the increase of axial compression ratio, but eventually develop to the shear plane fracture surface; the surface cracks of damaged coal samples under the radial stress gradient of surrounding rock have excellent fractal characteristics. The fractal dimension has a linear function relationship with axial compression loading ratio and wave velocity damage; from the angle of wave velocity damage and strength loss, it is expounded that the increase of confining pressure can inhibit low damage to a certain extent, but can promote the occurrence of extreme damage.
24 February 2022 in Arabian Journal of Geosciences
Severe deformation and support failure of coal–rock composite roofs are widely encountered in deep mining roadways, posing significant challenges to long-term roadway stability. Taking the 3806 fully mechanized top-coal caving face mining roadway of the Shuiliandong Coal Mine in the Binchang mining area, China, as an engineering case, this study systematically investigates the reinforcement mechanism and control performance of layered roof grouting through laboratory rock mechanical tests, physical similarity modeling, and field-scale industrial application. Borehole coring and mechanical testing were conducted to characterize the stratified structure and mechanical heterogeneity of the fractured top coal, immediate mudstone roof, and overlying sandstone. Based on these results, a plane-stress physical similarity model was established to comparatively analyze roadway deformation, stress evolution, failure modes, and microseismic responses under the original support scheme and a layered grouting reinforcement scheme. A layered grouting technology centered on “shallow bolt grouting and deep cable grouting” is proposed to reconstruct a superimposed beam-bearing structure within the coal–rock composite roof through differentiated grouting parameters. The similarity model results indicate that layered grouting reduces the maximum roof subsidence from 8.4 mm to 2.0 mm, significantly optimizes the stress redistribution of the surrounding rock, suppresses crack propagation and roof fragmentation, and effectively mitigates microseismic activity. Field application demonstrates that the maximum deformation of roadway ribs and roof–floor convergence decreases from 0.42 m to 0.53 m to 0.20 m and 0.12 m, respectively, with markedly improved roof integrity and long-term stability. The proposed layered grouting strategy provides a practical and reliable solution for stability control of coal–rock composite roofs in underground roadways.
1 January 2025 in International Journal of Energy Research
In order to study the progressive damage process and damage evolution law of deep rocks, conventional triaxial compression tests were conducted on sandstone, sandy mudstone, and mudstone under different loading conditions using the RMT‐150C electro‐hydraulic servo rock mechanics test system. Analyze the stress–strain characteristics of rocks, the deformation characteristics of progressive damage at different stages, and the strength characteristics of rocks under different loading pressures. Introduce equivalent plastic strain as a unified independent variable, analyze the nonlinear evolution law of rock strength parameters ( c and φ ) and expansion parameters ( ψ ) with equivalent plastic deformation, and establish a progressive rock damage model considering plastic hardening and expansion characteristics through rock strength parameters and expansion parameters. The results indicate that the progressive damage process of rocks can be divided into five stages: pore compression and density, linear elastic deformation, stable crack propagation, unstable crack propagation, and postpeak deformation. The strength of rock samples is mainly provided by the cohesive force parameter c , and the shear expansion angle ψ gradually increases and then stabilizes with the change of equivalent plastic strain εp . By fully considering the strain‐softening and dilatancy characteristics of rock, a progressive damage evolution model for rock cohesion c , internal friction angle φ , and dilation angle ψ was theoretically developed. The accuracy of the model was verified through discussion, providing better theoretical guidance for practical rock engineering practice.