As solar energy becomes an increasingly cheap source of renewable energy, major utility-scale ground solar panel installations, often called ‘solar farms’, are rapidly growing. With these solar farms often covering hundreds of acres, there is the potential for impacts on natural hydrologic processes, including runoff generation and erosion. Here we review the current state of scientific research on the hydrology and water quality impacts of solar farms, as well as management recommendations for minimizing any impacts. The limited field measurements indicate the redistribution of soil moisture around solar farms, but the net impacts on runoff and erosion are less clear. Research focused on coupling solar farms with agriculture as ‘agrivoltaics’ demonstrates reduced evaporative water losses and associated crop stress, particularly in more arid regions. With regards to land and the stormwater management associated with solar farms, most US states currently do not have solar farm-specific recommendations and instead defer to standard stormwater management permits and guidance. In states with solar farm-specific guidance, typical recommendations include minimizing construction-related compaction, ensuring a high cover of perennial vegetation with minimal maintenance, and designing with pervious space between solar panel rows to promote infiltration of any runoff; in some cases, structural stormwater management like infiltration basins may be required. In general, solar farms can be designed to minimize the impact on landscape ecohydrological processes, but more research is needed to determine whether current recommendations are adequate. In particular, there is a need for more field research on less ideal sites such as those with higher slopes.
1 February 2018 in Science of The Total Environment
A grid-based version of the Soil and Water Assessment Tool (SWAT) model, SWATgrid, was developed to perform simulations on a regularized grid with a modified routing algorithm to allow interaction between grid cells. However, SWATgrid remains largely untested with little understanding of the impact of user-defined grid cell size. Moreover, increases in computation time effectively preclude direct calibration of SWATgrid. To gain insight into defining appropriate strategies for future development and application of SWATgrid, this research considers the simulated differences between commonly-employed hydrologic response unit (HRU)-based and grid-based SWAT models and the implications of resolution on their simulation and calibrated parameter values for a Midwestern, agricultural watershed. Results indicate that: (1) the gridded approach underpredicted simulated streamflow between 5% and 50% relative to the baseline model, depending upon the input spatial resolution and routing algorithm implemented; (2) gridded models generally underpredicted total phosphorous and sediment loads while overpredicting nitrate load; and (3) ranges of values of optimized model parameters remained similar up to 90 m. Results from this analysis should help in defining future applications of the SWATgrid model and the effects of differing spatial resolution of the model input data.
10 September 2020 in Journal of Environmental Quality
Although many agricultural watersheds rely heavily on riparian buffer adoption to meet water quality goals, design and management constraints in current policies create adoption barriers. Based on focus group feedback, we developed a flexible buffer design paradigm that varies buffer width, vegetation, and harvesting. Sixteen years of daily‐scale nutrient and sediment loads simulated with the Soil and Water Assessment Tool (SWAT) were coupled to the three‐zone Riparian Ecosystem Management Model (REMM) to compare the effectiveness of traditional, policy‐based buffer designs with designs that are more flexible and integrate features important to local farmers. Buffer designs included (i) 10 m grass, (ii) 15 m grass, (iii) 15 m deciduous trees, (iv) 30 m grass and trees, (v) 30 m grass and trees with trees harvested every 3 yr, and (vi) 30 m grass and trees with grass harvested every year. Allowing harvesting in one zone of the buffer vegetation (either trees or grasses) minimally affected water quality, with annual average percent reductions differing by .05; 76–78% for total nitrogen [TN], 51–55% for total phosphorus [TP], and 68% for sediment). Under the highest input loading conditions, buffers with lower removal efficiencies removed more total mass than did buffers with high removal efficiencies. Thus, by focusing on mass reduction in addition to percent reduction, watershed‐wide buffer implementation may be better targeted to TN, TP, and sediment reduced. These findings have important implications for informing flexible buffer design policies and enhanced placement of buffers in watersheds impaired by nutrient and sediment.
8 February 2023 in Journal of Environmental Management