This paper presents an investigation into the use of a 2-dimensional laser scanner (LiDAR) to obtain measurements of wave processes in the inner surf and swash zones of a microtidal beach (Rousty, Camargue, France). The bed is extracted at the wave-by-wave timescale using a variance threshold method on the time series. Individual wave properties were then retrieved from a local extrema analysis. Finally, individual and averaged wave celerities are obtained using a crest-tracking method and cross-correlation technique, respectively, and compared with common wave celerity predictors. Very good agreement was found between the individual wave properties and the wave spectrum analysis, showing the great potential of the scanner to be used in the surf and swash zone for studies of nearshore waves at the wave-by-wave timescale.

Understanding of breaking and broken waves is key for the prediction of nearshore sediment transport and coastal hazards, however the difficulty of obtaining measurements of highly unsteady nearshore waves has limited the availability of field data. This paper reports on a novel field experiment designed to capture the time-varying free-surface throughout the surf and swash zones was conducted on a dissipative sandy beach using an array of 2D LiDAR scanners. Three scanners were deployed from the pier at Saltburn-by-the-Sea, UK for a 6 day period to monitor the surface elevation of nearshore waves from the break point to the runup limit at temporal and spatial resolutions (order of centimetres) rarely achieved in field conditions. The experimental setup and the procedure to obtain a continuous time series of surface elevation and wave geometry is described. A new method to accurately determine the break point location is presented and compared to existing methodologies

A detailed understanding of the behaviour of waves in the nearshore is essential for coastal engineers as these waves cause beach erosion, coastal flooding and damage to coastal structures. Significantly, the influence of reflected waves is often neglected in surf zone studies, although they are known to influence wave properties and circulation in the nearshore. In this paper, a phase-resolving model is rigorously applied to model conditions from the prototype-scale BARDEXII experiment in order to examine and assess the influence of swash-based reflection on surf zone hydrodynamics at both the individual wave and time-averaged timescales. Surface elevation is separated into incoming and outgoing signals using the Radon Transform and a crest tracking algorithm is used to extract incident and reflected wave properties. It is found that on steep beaches (tan β > 1:9) the swash-based reflection - the reflection generated in the swash during the backwash - contributes significantly to the intrawave variability of individual wave properties such as the wave height to water depth ratio γ, through the generation of quasi-nodes/antinodes system. For γ expressed with individual wave heights, variations up to 25% and 40% are obtained for the modelled regular and irregular wave tests, whereas it reaches 15% when it is based on the significant wave height. The outgoing wave field-induced hydrodynamics is also found to affect time-averaged parameters: undertow and horizontal velocity skewness. The undertow is mainly strengthened, particularly in the shoaling region where the outgoing component dominates over the contribution from the incoming wave field. Offshore of the bar, an onshore-directed flow streaming close to the bed is also generated under the outgoing wave field, and is suspected to help in stabilising the bar position. This, along with the influence of the outgoing wave field on the horizontal velocity skewness and the presence of quasi-standing waves, suggests a complex contribution of the hydrodynamics induced by swash-based reflection into sediment transport rates and nearshore bar generation/migration

The spatial and temporal variation of energy dissipation rates in breaking waves controls the mean circulation of the surf zone. As this circulation plays an important role in the morphodynamics of beaches, it is vital to develop better understanding of the energy dissipation processes in breaking and broken waves. In this paper, we present the first direct field measurements of roller geometry extracted from a LiDAR data set of broken waves to obtain new insights into wave energy dissipation in the inner surf zone. We use a roller model to show that most existing roller area formulations in the literature lead to considerable overestimation of the wave energy dissipation, which is found to be close to, but smaller than, the energy dissipation in a hydraulic jump of the same height. The role of the roller density is also investigated, and we propose that it should be incorporated into modified roller area formulations until better knowledge of the roller area and its link with the mean roller density is acquired. Finally, using previously published results from deepwater wave breaking studies, we propose a scaling law for energy dissipation in the inner surf zone, which achieves satisfactory results at both the time‐averaged and wave‐by‐wave scales.