Zebib Y Nuru

Dr. Zebib Y Nuru


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 April 2020 in MRS Advances
Verified
Journal Article
Closed access
PDF file
HGHenok Gebretinsae
Henok Gebretinsae
GWGiday Welegergs
Giday Welegergs
NMN. Matinise
N. Matinise
MMM. Maaza
M. Maaza
ZNZebib Y Nuru
Zebib Y Nuru

27 November 2022 in Energies
Verified
Journal Article
Open access
PDF file
HGHenok Gidey Gebretinsae
Henok Gidey Gebretinsae
MTMeresa G. Tsegay
Meresa G. Tsegay
GWGiday G Welegergs
Giday G Welegergs
MMMalik Maaza
Malik Maaza
ZNZebib Y Nuru
Zebib Y Nuru
This article presents a simple and low-cost green synthesized single-layer NiO selective solar absorber nanocoating prepared by spin coating on a Cu substrate at different rotational speeds (RS). The effects of substrate RS on the structural, morphological, chemical, and optical properties of the NiO nanocoatings were thoroughly investigated. The XRD results reveal the formation of pure diffraction peaks indexed to face-centered cubic NiO nanocoatings. SEM confirmed the uniform distribution of the NiO thin films with a nanosphere-like structure and the influence of RS variation on the formation of NiO nanostructures. EDS and XPS confirmed the presence of Ni and O in the green synthesized NiO coatings. AFM showed homogeneous nanopillar-like NiO thin films with the average surface roughness decreasing from 13.6 to 9.06 nm as the RS increased from 700 to 1300 RPM. Raman spectroscopy of the nanocoatings showed normal modes related to longitudinal optical and transverse optical phonons, and a combination of both, which implies the presence of a defect-rich or anti-ferromagnetically ordered NiO film responsible for the occurrence of more scattering peaks. UV–Vis–NIR and Fourier transform infrared spectroscopy (FTIR) were employed to characterize the optical properties of the nanocoatings. The green synthesized NiO nanocoatings deposited at 700 RPM exhibited excellent solar absorptance (α) of 0.92 and low thermal emittance (ɛ) of 0.11. The optical properties of the selective materials obtained in the present work were correlated with the non-stoichiometric nature of the spin-coated sample, multiple reflections, and interference-induced light absorption on the green synthesized surface. These results suggest that the NiO thin films prepared through this simple and environmentally benign green synthesis method can be promising candidates for efficient solar selective absorbers.

28 September 2022 in Solar
Verified
Journal Article
Open access
PDF file
AAAhmed Saba Abdullahi
Ahmed Saba Abdullahi
RAR. Akoba
R. Akoba
JSJuliet Sackey
Juliet Sackey
SKS. Khamlich
S. Khamlich
SHSylvain Halindintwali
Sylvain Halindintwali
MMMalik Maaza
Malik Maaza
In this work, we study the thermal stability of a hydrothermally treated stainless steel (SS) selective solar absorber by annealing in air in a temperature range between 300 °C and 700 °C for a soaking time of 2 h. Thermal stability testing in the presence of air is critical if the vacuum is breached. Therefore, the SS was characterized by X-ray diffraction (XRD), mechanical, and optical techniques. The XRD analysis shows that the grain size of the as-treated absorber is 67 nm, whereas those of the annealed absorbers were found to be in the range between 66 and 38 nm. The phase of the as-treated and annealed SS was further identified by XRD as Fe2O3. The EDS result shows that the elemental components of the SS were C, Cr, Fe, and O. The strain (ε) and stress (σ) calculated for the as-treated absorber are 1.2 × 10−1 and −2.9 GPa, whereas the annealed absorbers are found in the range of 4.4 × 10−1 to 5.2 × 10−1 and −121.6 to −103.2 GPa, respectively, at 300–700 °C. The as-treated SS absorbers exhibit a good spectra selectivity of 0.938/0.431 = 2.176, which compares with 0.941/0.403 = 2.335 after being annealed at 300 °C and 0.884/0.179 = 4.939 after being annealed at 700 °C. These results indicate a small improvement in absorptivity (0.941) and emissivity (0.403) after annealing at 300 °C, followed by a significant decrease after annealing at 700 °C. The obtained analysis confirms that the annealed SS absorber exhibits excellent selectivity and is suitable to withstand any thermal condition (≤700 °C) in air. Thus, using a cost-effective approach as demonstrated in this study, the as-treated and annealed SS absorber could be used for photo-thermal conversion applications.