Microelectromechanical systems accelerometers have opened new possibilities for vibration monitoring of a rotating machinery. They enable mounting accelerometers directly to the rotating component of the machine, e.g., shaft. This enables not only the measurement of a lateral vibration but also a torsional vibration of the machine. This increases the vibration data gathered from the machine by one measurement instrument. This article presents an on-shaft wireless universal measurement unit (UMU) with innovative combination of features, such as a high measurement range and easy mounting. The UMU has a two-sensor configuration where two accelerometers are mounted to the opposite sides of a shaft. This enables to utilize a novel signal processing method to separate torsional and lateral vibration from the data. The signal processing method combines and modifies methods presented in the published literature. The results presented in this article demonstrate that the UMU together with the presented signal processing method can measure frequencies of torsional and lateral vibration accurately. However, the amplitude comparison between the UMU and reference sensors cannot be done adequately because they are measuring either different components of the machine or different physical properties.
3 March 2022 in Mechanical Systems and Signal Processing
As the maritime industry evolves, there is a focus onsimulation-driven design, testing, and validation usingnovel technology solutions. Simulation models designed torepresent the behaviour and features of real systems areincreasingly available for testing during the early phaseof the full development, but in many cases, their testingsuffers from the availability of test oracles. Metamorphictesting has become increasingly used in differentapplication domains as an approach to test systems when anexplicit test oracle is unavailable. In order to increaseits adoption by domain experts, we combine metamorphictesting with Behaviour Driven development for theverification and validation of simulation models. Thetool-based approach facilitates automated test generationbased on domain-specific custom metamorphic transformationsto generate meaningful test inputs for metamorphic inputrelations. The method also uses features and scenariosextracted from system requirements and domain expertise todefine metamorphic output relations. By automating testgeneration based on system behaviours as features,scenarios, metamorphic transformations, and outputcandidates for metamorphic relations in a Gherkin-likeformat, the tool enables practitioners to verify modelsbased on domain-specific constraints and metamorphicrelation checks. Our preliminary evaluation shows that thetool can detect MR violations in the simulation modelsunder test and that automated test generation providesimproved coverage.
5 September 2026 in Environmental Modeling & Assessment
Accurate quantitative assessment of near-surface wind and turbulence in coastal harbors remains challenging because terrain, vegetation, and built structures interact in a direction-dependent manner and are often treated using lumped or simplified surface representations in numerical models. This study presents a component-resolved Computational Fluid Dynamics (CFD)-based assessment of local wind and turbulence conditions over Mariehamn harbor in the Åland Islands. The objective is to quantify how the inclusion or exclusion of forests and buildings modifies fairway-scale wind and turbulence exposure. Simulations were performed for eight wind directions using three surface configurations: terrain with buildings (TB), terrain with forests (TF), and terrain with both forests and buildings (TFB). The results show that forests had the larger fairway-scale relative contribution to both wind-speed reduction and turbulence generation, with the TF and TFB configurations producing similar broad flow patterns across most wind directions. A deviation-based analysis relative to the complete TFB configuration further quantified the relative contributions of forests and buildings and showed that excluding forests produced substantially larger changes than excluding buildings, particularly in normalized turbulence intensity at higher heights. These findings highlight the larger relative contribution of forest canopies to momentum loss and turbulence modification over the fairway within the lower atmospheric boundary-layer. The resulting CFD dataset and component-resolved assessment approach provide a physically consistent basis for future integration into intelligent fairway and navigation-oriented decision-support frameworks.
This article introduces a methodology for automatic generation of geometries and meshes for kilometer-scale Atmospheric Boundary Layer (ABL) flow simulations, with topography and elevation. The proposed programmatic (hence automatable) \emph{template morphing approach} facilitates interpolation of scattered point cloud terrain data on a template geometry domain, morphing a high-quality quadrilateral template mesh for the interpolated geometry, and setup as well as execution of Computational Fluid Dynamics (CFD) flow simulation. The proposed method specifically addresses the previously reported problems of sustaining an ABL structure across the simulation domain by imposing the velocity and turbulence properties on all vertical surfaces. We present a validation study for the proposed method on an artificial Gaussian hill terrain. A real-world localized wind forecast application from the Turku Archipelago, Finland, is also presented, using open terrain data from National Land Survey of Finland. Such localized wind forecasts aim to assist ships in autonomous navigation and maneuvering in complex port or fairway environments, which is the motivation for this study.