IoT systems based on collaborative sensor networks are becoming increasingly common in various industries owing to the increased availability of low-cost sensors. The quality of the data provided by these sensors may be unknown. For these reasons, advanced data processing and sensor network self-calibration methods have become popular research topics. In terms of metrology, the self-calibration methods lack the traceability to the established measurement standards of National Metrology Institutes (NMIs) through an unbroken chain-link of calibration. This problem can be solved by the ongoing digitalization of the metrology infrastructure. We propose a conceptual solution based on Digital Calibration Certificates (DCCs), Digital SI (D-SI), and cryptographic digital identifiers, for validation of data quality and trustworthiness. The data that enable validation and traceability can be used to improve analytics, decision-making, and security in industrial applications. We discuss the applicability and benefits of our solutions in a selection of industrial use cases, where collaborative sensing has already been introduced. We present the remaining challenges in the digitization and standardization processes regarding digital metrology and the future work required to address them.
In rotating machinery, excessive vibration can affect the lifetime of the machine and, for example, in paper machines, it can directly affect production quality. Hence, it is important to monitor vibrations. Typically the vibrations are measured with piezo-based accelerometers attached to the bearing housing. Installation of the accelerometers and especially cabling is laborious and expensive in the case of existing machines that have several components to monitor. In continuous process maintenance, a break may be required as well. Therefore, typically only the critical rotors will be monitored, if at all. This research focuses on applying wireless microelectromechanical systems (MEMS) accelerometers to the measurement of large rotor vibration. The results indicated that MEMS accelerometers combined with wireless communication can offer a viable alternative to more expensive piezo-based accelerometers with traditional wire-based communication. The combination provides a flexible and cost-effective method for the collection of vibration data from large rotors and rotor systems.
Microelectromechanical systems accelerometers have opened new possibilities for vibration monitoring of a rotating machinery. They enable mounting accelerometers directly to the rotating component of the machine, e.g., shaft. This enables not only the measurement of a lateral vibration but also a torsional vibration of the machine. This increases the vibration data gathered from the machine by one measurement instrument. This article presents an on-shaft wireless universal measurement unit (UMU) with innovative combination of features, such as a high measurement range and easy mounting. The UMU has a two-sensor configuration where two accelerometers are mounted to the opposite sides of a shaft. This enables to utilize a novel signal processing method to separate torsional and lateral vibration from the data. The signal processing method combines and modifies methods presented in the published literature. The results presented in this article demonstrate that the UMU together with the presented signal processing method can measure frequencies of torsional and lateral vibration accurately. However, the amplitude comparison between the UMU and reference sensors cannot be done adequately because they are measuring either different components of the machine or different physical properties.