The potential impact of vibration from nearby construction on four ancient stone statues in the Qingdao Museum was studied. Simulated but full-scale drilling, excavation and impact breaking were conducted to gather ground motion data which were used to prepare incremental dynamic time histories. The four stone statues were modeled numerically and the models were used to estimate the statues’ maximum tensile stress, maximum strain and maximum shear stress in response to the time histories. The most vulnerable parts of the statue are thus identified, and vibration limits were proposed.
According to statistics from past earthquakes, it is observed that multi-story reinforced concrete (RC) frames represent a large proportion of the structural failures or collapses in seismic events. Hence, research on seismic collapse mechanisms and risks of RC frame structures subjected to extreme earthquakes is of foremost importance. Both experimental and numerical studies have been substantially carried out in this field. In order to represent an actual process of structural damage in an actual seismic event and provide a calibration test for numerical studies, a shake table collapse test of a typical multi-story RC frame structural model, which is scaled from a nearly collapsed building in the 2010 Ms 7.1 Yushu earthquake in China, was performed. Both the test and earthquake field investigation indicate that severe damage mainly occurred at the column ends. As dual structural systems, i.e., systems combining frames and additional members that mainly carry seismic loading, could be a better way to solve the unexpected damage mechanism of RC frames, a practical stiffness iteration design method based on the nonlinear static analysis to obtain the optimal stiffness demanding of the lateral load-resisting members in each story is proposed. This approach aims to control the structural deformation pattern along the height. The outcome of this study provides some intrinsic understanding of the inherent collapse mechanisms of similar RC frames during strong earthquakes. It also offers a practical design method to improve the seismic collapse resistance of RC frames.
5 June 2016 in Earthquake Engineering and Engineering Vibration
The steel tube-reinforced concrete (STRC) shear wall plays an important role in the seismic design of high-rise building structures. Due to the synergistic collaboration between steel tubes and concrete, they effectively enhance the ductility and energy dissipation capacity of conventional shear walls. To identify vulnerable areas prone to brittle failure and optimize the design, it is essential to develop a rapid method for identifying the failure mode of STRC shear walls. In this study, a fast identification method of STCR shear wall failure modes based on a Blending fusion model with Generative Adversarial Network (GAN) augmented data is proposed. The GAN is employed to address the issue of inadequate experimental data by generating new samples. This method combines classification boosting (Catboost), Random Forest (RF), K-Nearest Neighbors (KNN), and Least Absolute Shrinkage and Selection Operator (LASSO) to establish the Blending-CRKL fusion model to improve the prediction accuracy of the failure mode of STRC shear walls. The results reveal a significant improvement in the prediction performance of KNN, Backpropagation Neural Network (BPNN), RF, Light Gradient Boosting Machine (LightGBM), Catboost, and Blending-CRKL models after augmenting the training set with GAN. On average, the accuracy increased by 13%, precision increased by 81%, recall increased by 48%, and F1 score increased by 67%. The proposed Blending-CRKL fusion model outperforms the tested KNN, BPNN, RF, LightGBM, and Catboost models, achieving an accuracy rate of 97% in predicting the failure mode of STRC shear walls. Additionally, the stability and robustness of the Blending-CRKL model were validated, while the important features and value ranges of different failure modes were analyzed. This study provides a reference for the rapid identification of the failure mode of STRC shear walls.
The macroseismic intensity spatial distribution is an important input for most rapid loss modeling and emergency work. Data from a total of 175 earthquakes (Ms ≥ 5.0) in China from 1966 to 2014 were collected, and the rapid assessment method of macroseismic intensity distribution was studied. First, simple relationships among the epicentral intensity, magnitude, and focal depth were established. A greater amount of database is used in this study than that in a previous work (Fu and Liu in Sci R 4(5): 350-354 (1960), Mei in Chin J Geophys 9(1): 1–18 (1960), and Yan et al. in Sci Chin 11: 1050-1058 (1984)), and the studied earthquakes all occurred in the last 50 years, providing more accurate and uniform parameter information. As the seismic intensity-attenuation relationship is traditionally used to estimate the intensity distribution, the macroseismic intensity-attenuation relationship for mainland China was fitted by the earthquake data collected in this region. The deviation of the intensity assessment by the macroseismic intensity-attenuation relationship was examined for 43 earthquakes (Ms ≥ 6.0). In addition, seismic damage emergency assessment work requires the isoseismal lines to be constantly modified according to the updated information. Therefore, an improved ellipse intensity-attenuation model was proposed in this study, completed by the establishment of a semimajor axis and semiminor axis length matrix. Based on the initial value of the length matrix obtained by the regression of historical data and survey data from the site, the least mean squares (LMS) algorithm is used to revise the length matrix. In the end, the practicability of this method is verified by a case study of the Lijiang 7.0 earthquake.
1 January 2017 in Advances in Materials Science and Engineering
Damage detection tests of inclined cables, steel pipes, spherical shells, and an actual cable-stayed bridge were conducted based on the proposed musical tone law method. The results show that the musical tone law method could be used in the damage detection of isotropic material structures with simple shape, like cables, pipes, plates, and shells. Having distinct spectral lines like a comb with a certain interval distribution rule is the main characteristic of the music tone law. Damage detection baseline could be established by quantizing the fitting relationship between modal orders and the corresponding frequency values. The main advantage of this method is that it could be used in the structural damage detection without vibration information of an intact structure as a reference.