Here, we report on a composite nanomechanical resonant magnetometer with magnetoelastic thin film integrated on the surface of a film bulk acoustic resonator (FBAR). By exploiting the delta-E effect of magnetoelastic thin film and resonance characteristic in piezoelectric thin film, we theoretically and experimentally demonstrate the capability to realize ultrahigh resonance frequency and excellent magnetic field sensitivity in such composite configuration, thereby greatly improving the limit of detection of weak magnetic field. The proposed FBAR-based resonant magnetometer achieves maximum magnetic sensitivity of 137 kHz/Oe in a proof-of-concept device without structural optimization, corresponding to a noise equivalent power as low as 7 nT/Hz 1/2 . Further study indicates that by optimizing the thicknesses of the magnetic sensitive layer and piezoelectric layer, an unprecedented sensitivity of 5 GHz/Oe with an exceptional limit of detection of weak magnetic field down to 190 ${f}\text{T}$ /Hz 1/2 could be potentially achieved. Our work provides a forward new and exciting route toward ultralow magnetic field detection in civilian and military applications.
12 July 2021 in IEEE Transactions on Instrumentation and Measurement
Eddy current pulsed thermography (ECPT) is widely used in the nondestructive testing (NDT) of metal surface defects. Because defect information is sometimes affected by the edge effect, it is necessary to segment the ECPT image sequence, that is, separate the defected part from the background, to improve the detection effect. Tensor robust principal component analysis has been widely used in many image segmentation fields, such as medical imaging, face recognition, and so on, which also includes NDT, but it faces the problems of high time cost, overfitting, and insufficient physical interpretability in industrial applications. In this article, a new variable, global Moran’s index, is introduced to tensor decomposition for ECPT image sequences processing since the defect signal always gathers around the defects and shows spatial cohesion. The proposed method, named Moran’s index-based tensor decomposition (MITD), can significantly reduce the iterations, by up to 97%, and remove the influence of background noise. To demonstrate the performance of MITD, several experiments are carried out on three artificial samples and three natural samples from a nuclear power plant. Furthermore, a detailed comparison is drawn between MITD and other existing methods. The experimental results show that MITD not only reduces the time cost but also improves the image contrast.
17 October 2022 in IEEE Transactions on Power Electronics
Insulated gate bipolar transistor (IGBT) chips are crucial core components in power electronic modules. It is of great significance to investigate the deformation characteristics of IGBT chips induced by the electro-thermal-mechanical coupling. In this article, a field reconstruction technique based on scanning laser displacement measurement is developed to accurately capture the dynamic deformation field distribution on the surface of IGBT chips. Based on this method, a comprehensive investigation of the impacts of switching conditions on the deformation fluctuation characteristics of IGBT chips is implemented. The results indicate the middle region of the IGBT chip suffers from a relatively larger deformation compared to the edge area. In particular, the largest deformation fluctuation occurs near the heel of bonding wires. In addition, it is also observed that the deformation fluctuation is negatively correlated with the switching frequency, meanwhile positively related to load amplitude, and shows a trend of increasing first, and then, decreasing with duty cycle. This work provides an intuitive and effective method for the dynamic deformation field characterization of IGBT chips. Furthermore, the outcomes obtained in this article can also provide confident evidence and important data to facilitate more precise reliability analysis and evaluation for power electronic modules.
In this paper, we focus on eddy current array (ECA) technology for defect detection in finely grooved structures of spinning cylinders, which are significantly affected by surface texture interference, lift-off distance, and mechanical dither. Unlike a single eddy current coil, an ECA, which arranges multiple eddy current coils in a specific configuration, offers not only higher accuracy and efficiency for defect detection but also the inherent properties of space and time for signal acquisition. To efficiently detect defects in finely grooved structures, we introduce a spatiotemporal self-attention mechanism to ECA testing, enabling the detection of defects of various sizes. We propose a Multi-scale SpatioTemporal Self-Attention Network for defect detection, called MSTSA-Net. In our framework, Temporal Attention (TA) and Spatial Attention (SA) blocks are incorporated to capture the spatiotemporal features of defects. Depth-wise and point-wise convolutions are utilized to compute channel weights and spatial weights for self-attention, respectively. Multi-scale features of space and time are extracted separately in a pyramid manner and then fused to regress the bounding boxes and confidence levels of defects. Experimental results show that the proposed method significantly outperforms not only traditional image processing methods but also state-of-the-art models, such as YOLOv3-SPP and Faster R-CNN, with fewer parameters and lower FLOPs in terms of Recall and F1 score.