Eddy current pulsed thermography (ECPT) has attracted much attention in nondestructive testing for its noncontact and large field of view. However, the ECPT images usually suffer from the thermal diffusion blurs. The fusion of temperature spatial and temporal features is the hotspot in the new research of ECPT enhancing methods, but these two features are contradictory on the speed and the accuracy of algorithms. Specifically, spatial features process fast but perform poorly in accuracy and antinoise ability, while temporal features are usually calculated from the whole ECPT video sequence, which inevitably increases the demand for data storage and the time cost, especially in the detection of large workpieces, such as engine blades or pressure pipelines. In this article, an enhanced diffusion-based method (EDBM) is proposed to solve this issue, which maps the temporal features through the spatial features of a single ECPT image, significantly reduces the input data volume and shows great potential in ECPT online detection. Experiments on multiple artificial and natural samples verify that, compared with raw ECPT image, the proposed EDBM can reduce root-mean-square error by 51.7%–86.5% (73.2% on average) and improve signal-to-noise ratio by 3.70–16.8 times (6.82 times on average), which performs better than the commonly spatial-based and temporal-based ECPT enhancement algorithms, such as enhanced Canny and independent component analysis, close to the latest sparse-model decomposition methods, but with two orders of magnitude less time cost.
2 May 2024 in IEEE Transactions on Industrial Informatics
Accurately evaluating the 3-D profile of nonferromagnetic metal surface defects is essential for nondestructive evaluation. Eddy current pulsed thermography (ECPT) has been used for reconstructing surface defects, which utilizes multiphysics coupling of electromagnetic and thermal fields. Previous investigations mainly employ the thermal field for reconstruction. However, the thermal field varies slowly over time and has weak correlation, which causes serious blur and noise. In this article, a surface defect 3-D profile reconstruction method based on eddy current field distribution is proposed. The proposed method takes advantage of the strong global correlation of eddy current fields and proposes an inversion technique to reconstruct defects. Experimental results demonstrate that the proposed method can effectively reconstruct the 3-D profile of defects with depths within the skin depth, including complex-shaped defects and natural cracks.
Current distribution measurement methods are widely used in medical examinations, predicting faults in semiconductor devices and assessing structural integrity. Several methods for measuring current distribution are available, such as electrode arrays, coils, and magnetic sensors. However, these measurement methods are unable to obtain images of current distribution with high spatial resolution. Therefore, there is a need to develop a non-contact method to measure current distribution that is capable of capturing images with high spatial resolution. In this study, a non-contact current distribution measurement method based on infrared thermography is proposed. The method uses thermal variations to quantify the current amplitude and reconstructs the current direction based on the passivity of the electric field. For quantification of low frequency current amplitude, the experimental results show that the method can provide accurate current measurement results, for example, at the power frequency (50 Hz), in the range of 1.05–3.45 A, its relative error can be improved to ±3.66% when the calibration fitting method is used. For the high-frequency current, an effective estimate of the current amplitude is obtained using the first-order derivative of temperature variation. When applied to the eddy current detection (256 KHz), it achieves a high-resolution image of the current distribution, and the effectiveness of the method is verified through simulation experiments. The experimental results show that the proposed method not only measures the current amplitude accurately but also improves the spatial resolution in acquiring two-dimensional current distribution images.
1 December 2023 in Journal of Electronic Science and Technology