Earthquakes are destructive natural hazards with damage capacity dictated by rupture speeds. Traditional dynamic rupture models predict that earthquake ruptures gradually accelerate to the Rayleigh wave speed with some of them further jumping to stable supershear speeds above the Eshelby speed (~ $$\sqrt{2}$$ times S wave speed). However, the 2018Mw7.5 Palu earthquake, among several others, significantly challenges such a viewpoint. Here we generate spontaneous shear ruptures on laboratory faults to confirm that ruptures can indeed attain steady subRayleigh or supershear propagation speeds immediately following nucleation. A self-similar analysis of dynamic rupture confirms our observation, leading to a simple model where the rupture speed is uniquely dependent on a driving load. Our results reproduce and explain a number of enigmatic field observations on earthquake speeds, including the existence of stable subEshelby supershear ruptures, early onset of supershear ruptures, and the correlation between the rupture speed and the driving load.
9 August 2021 in Bulletin of Engineering Geology and the Environment
Dynamic disasters frequently occur in deep coal mines, where coals and rocks are under high in situ stresses. To reveal the failure mechanism of deep burying coals, the specimens were made of buried coals at a depth of about 1 km. An improved Kolsky bar was applied to conduct the dynamic compression experiments subjected to different hydrostatic pressure i.e., 0, 5, 10, 15, and 20 MPa for simulating in situ stresses corresponding to depths of 0, 200, 400, 600, and 800 m. The findings demonstrate that the dynamic compressive strength of coal at a specified depth is rate-dependent. And the dynamic strength is positively correlated with the burial depth at a given loading rate. Moreover, a Mohr–Coulomb strength criterion for coal under dynamic loadings that considers the effect of depth is established, and the model describes the experimental results well.