It is established that smoking is a major risk factor of atherosclerosis. Endothelial dysfunction occurs in the initial step in the pathogenesis of atherosclerosis and plays a critical role in the development of atherosclerosis. The purpose of this study was to evaluate the association between smoking status and endothelial function in detail in men. We measured flow-mediated vasodilation (FMD) in 2209 Japanese men including 1181 men who had never smoked and 1028 current smokers. All of the participants were divided into five groups by smoking pack-years: never smoker group (= 0), light smoker group (> 0 to 10), moderate smoker group (> 10 to 20), heavy smoker group (> 20 to 30) and excessive smoker group (> 30). FMD significantly decreased in relation to pack-years (6.6 ± 3.4% in the never smoker group, 6.8 ± 3.0% in the light smoker group, 6.5 ± 2.9% in the moderate smoker group, 5.9 ± 2.9% in the heavy smoker group, and 4.9 ± 2.7% in the excessive smoker group; P < 0.001). After adjustment for age (≥ 65 years), body mass index, systolic blood pressure, low-density lipoprotein cholesterol, glucose, and year of recruitment, FMD was significantly smaller in the excessive smoker group than in the never smoker group as a reference group (OR 1.95, 95% CI 1.42 to 2.67; P < 0.001). These findings suggest that FMD decreases with an increase in the number of cigarettes smoked and that excessive smoking is associated with endothelial dysfunction. Cigarette smoking is harmful to vascular function in men who are heavy smokers.
The effects of Covid-19 vaccines on vascular function are still controversial. We evaluated the effects of BNT162b2 vaccine (BioNTech and Pfizer) on endothelial function assessed by flow-mediated vasodilation (FMD) and vascular smooth muscle function assessed by nitroglycerine-induced vasodilation (NID). This study was a prospective observational study. A total of 23 medical staff at Hiroshima University Hospital were enrolled in this study. FMD and NID were measured before vaccination and two weeks and six months after the 2nd dose of vaccination. FMD was significantly smaller two weeks after the 2nd dose of vaccination than before vaccination (6.5±2.4% and 8.2±2.6%, p = 0.03). FMD was significantly larger at six months than at two weeks after the 2nd dose of vaccination (8.2±3.0% and 6.5±2.4%, p = 0.03). There was no significant difference between FMD before vaccination and that at six months after the 2nd dose of vaccination (8.2±2.6% to 8.2±3.0%, p = 0.96). NID values were similar before vaccination and at two weeks, and six months after vaccination (p = 0.89). The BNT162b2 Covid-19 vaccine temporally impaired endothelial function but not vascular smooth muscle function, and the impaired endothelial function returned to the baseline level within six months after vaccination.
16 February 2021 in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
Under steady-state pure rolling conditions with low speed, the thickener fiber agglomerations can be maintained for a long time, generating a beneficial thicker film thickness. However, in industrial applications, motions with sliding or transient effects are very common for gears, rolling-element bearings or even chain drives, evaluation of the grease performance under such conditions is vital for determining the lubrication mechanism and designing new greases. In this project, optical interferometry experiments were carried out on a ball-disk test rig to study the disintegration time of the grease thickener agglomerations with the increase of the slide-to-roll ratio under steady-state and reciprocation motions. Under steady-state conditions, the thickener fiber agglomeration can exist for a while and the time becomes shorter with the increase of the slide-to-roll ratio above the critical speed. Below the critical speed, the thickener fiber can exist in the contact in the form of a quite thick film for a very long time under pure rolling conditions but that time is decreased with the increase of the slide-to-roll ratio. The introduction of the transient effect can further reduce the existence time of the thickener.
Typical lubricants behave in a non-Newtonian manner under conditions of high shear and high pressure, as is commonly observed in lubricated rolling/sliding contacts. To optimize and predict the friction therein, knowledge of the high-pressure rheological behaviors of lubricants and limiting shear stress (LSS) is essential. This study developed an approach for determining the LSS of lubricants based on friction mapping of rolling/sliding contacts, using a ball-on-disc traction machine. The main contribution lies in the introduction of a practical approach for the selection of a proper entrainment velocity for determining the LSS, with reduced thermal influences and near isothermal conditions. The proposed approach enables full film lubrication, while keeping the film as thin as possible to prevent excessive shear heating and, thus, thermal effects. The LSS of two lubricants, PAO40 and complex ester, has been measured at pressures ranging from 1.2 GPa to 1.7 GPa. A bilinear model has been used to describe the variation of LSS with pressure. The impact of entrainment velocity selection on the measurement of LSS is also discussed.
3 May 2019 in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
In this study, experiments were conducted on a ball-on-disk test rig using optical interferometry to explore the variation in grease film thickness under zero entraining velocity reciprocating motion. The steel ball and the sapphire disk move at equal speeds but in opposite directions within a triangle wave. Three types of commercially available bearing greases with different consistencies, Centoplex 2EP, Centoplex 3, and MP-3, were used in these experiments. The variations in the surface dimple phenomenon with decreasing maximum surface velocity, differing grease consistency, and grease starvation conditions were studied. Results showed that the grease consistency exerts a significant influence on the surface dimple and the starvation severity.
For wind turbine applications, there is a cyclic load-varying process between rolling elements and raceways in pitch bearings. This kind of motion can also lead to radial fretting. However, this is seldom addressed under grease-lubricated conditions in the literature. In this study, grease-lubricated point contact problems have been investigated experimentally under cyclic load-varying conditions. The findings revealed that as the load-varying range diminishes, the variation in grease film distribution becomes more subtle and the rate of discharge of thickener fiber clusters in the stick zone decelerates. This is due to the fact that the rate of change in the Hertz contact radius is reduced and the migration of grease is weakened during the unloading process. Due to the large apparent viscosity of grease with a high soap content, entrapped grease is not easily discharged during loading, and the thickness of the film in the stick zone progressively increases as the soap content of the grease is augmented. This also causes the variable load zone to wear out more easily. As the grease is subjected to repeated loading and unloading, there is a gradual reduction in film thickness, and larger thickener fiber clusters tear, resulting in a flattened form and shear thinning. Grease containing sulphur–phosphorus additives demonstrates a superior effect on reducing fretting wear within the large variable load range but generally proves effective for smaller load-varying ranges. This study may offer insights into the degradation of grease under variable load motion and methods to prevent radial fretting wear.