Driven primarily by cloud service and data-center applications, short-reach optical communication has become a key market segment and growing research area in recent years. Short-reach systems are characterized by direct detection-based receiver configurations and other low-cost and small form factor components that induce transmission impairments unforeseen in their coherent counterparts. Innovative signaling and digital signal processing (DSP) play a pivotal role in enabling these components to realize their ultimate potentials and meet data rate requirements in cost-effective manners. This paper presents an overview of recent DSP developments for short-reach communications systems and discusses future trends.

Optical performance monitoring (OPM) is the estimation and acquisition of different physical parameters of transmitted signals and various components of an optical network. OPM functionalities are indispensable in ensuring robust network operation and plays a key role in enabling flexibility and improve overall network efficiency. We review the development of various OPM techniques for direct-detection systems and digital coherent systems and discuss future OPM challenges in flexible and elastic optical networks.

Advanced modulation formats combined with digital signal processing and direct detection is a promising way to realize high capacity, low cost and power efficient short reach optical transmission system. In this paper, we present a detailed investigation on the performance of three advanced modulation formats for 100 Gb/s short reach transmission system. They are PAM-4, CAP-16 and DMT. The detailed digital signal processing required for each modulation format is presented. Comprehensive simulations are carried out to evaluate the performance of each modulation format in terms of received optical power, transmitter bandwidth, relative intensity noise and thermal noise. The performance of each modulation format is also experimentally studied. To the best of our knowledge, we report the first demonstration of a 112 Gb/s transmission over 10km of SSMF employing single band CAP-16 with EML. Finally, a comparison of computational complexity of DSP for the three formats is presented.

We demonstrate mode-division multiplexed WDM transmission over 50-km of few-mode fiber using the fiber’s LP₀₁ and two degenerate LP₁₁ modes. A few-mode EDFA is used to boost the power of the output signal before a few-mode coherent receiver. A 6×6 time-domain MIMO equalizer is used to recover the transmitted data. We also experimentally characterize the 50-km few-mode fiber and the few-mode EDFA.

A novel intrinsic fiber optic pressure sensor realized with a polarization-maintaining photonic crystal fiber (PM-PCF) based Sagnac interferometer is proposed and demonstrated experimentally. A large wavelength–pressure coefficient of $3.42\mathrm{nm}/\mathrm{MPa}$ was measured using a $58.4\mathrm{cm}$ long PM-PCF as the sensing element. Owing to the inherently low bending loss and thermal dependence of the PM-PCF, the proposed pressure sensor is very compact and exhibits low temperature sensitivity.

Based on fiber Bragg gratings (FBGs) and high nonlinear photonic crystal fiber (HN-PCF), a novel dual-wavelength erbium-doped fiber (EDF) laser is proposed and demonstrated. Experimental results show that, owing to the contributions of two degenerate four-wave mixings in the HN-PCF, the proposed fiber laser is quite stable and two output signals are uniform at room temperature. With adjustment of the attenuator, our fiber laser can selectively realize one wavelength lasing.