An Experimental investigation was carried out to study the structural behaviour of deep beams using self-compacting concrete (SCC) with glass chopped strands (CS) in 0.06% and polypropylene fibre (PP) in different level of dosage. The SCC mix design was performed for 30 Mpa of Characteristics strength as per Nan-Su method. The SCC Mixes were prepared with Class F fly ash partially replacing cement by 40% . In addition with 0.06% of CS + SCC (CSSCC) in Combination with varying dosage of polypropylene fibre (CS+PP+ SCC), 0.1 (CSPSCC1), 0.2(CSPSCC2) and 0.3% (CSPSCC3) of volume of concrete were prepared. The effect of addition of hybrid fibre on the workability of SCC, CSSCC, CSPSCC1, CSPSCC2 and CSPSCC3 were studied. For the above mentioned mixes the Auxiliary specimens like cubes, cylinders and Prisms were casted and tested for Compression, Splitting Tension and Flexural strength respectively. A set of two Deep beams of size (1000×500×100 mm) were casted for each category of SCC mixes. The deep beams has been investigated for a structural behaviours like load deflection, web strains, energy absorption, toughness and crack width. From the study it has been inferred that addition of hybrid fibres to SCC mixes render beneficial both economical and Technical.
18 July 2022 in European Journal of Environmental and Civil Engineering
In the last two decades, the scientific community, by the efforts of researchers, has witnessed many attempts to find alternative materials for natural sand using industrial waste materials instead of natural river sand, with a major goal of preserving the natural environmental resources. One of the industrial waste materials, is Used Foundry Sand (UFS), which is processed and used in concrete as a partial replacement for fine aggregate as Treated Used Foundry Sand (TUFS). The precise and all-inclusive investigation on the corrosion resistant characteristics of TUFS blended concrete is very scant. Therefore, experimentations were conducted to study the corrosion resistance performance of TUFS as partial replacements for fine aggregate. TUFS were substituted for fine aggregate in different weight percentages. The reinforced concrete specimens were casted to 5% NaCl under accelerated corrosion process. Apart from half-cell potential measurement, impress current techniques were employed to assess rebar corrosion, and microstructural analysis was carried out using X Ray Diffraction (XRD). According to test results, TUFS concrete has better corrosion resistance qualities than control concrete, paving the way for high-quality concrete production.
In recent decades, corrosion in steel reinforcement has been one of the fundamental risks in steel-reinforced concrete (RC) structures. Geosynthetics can be an alternative approach to solve corrosion problems. The current experimental research work investigates the structural performance of geogrid-reinforced concrete (GRC) elements. Initially, five different geotextiles and biaxial geogrid materials were selected and embedded in the concrete specimens separately to study their mechanical properties. The results of the testing showed that the geogrid embedded specimen behaved more mechanically than the conventional concrete (CC) specimens due to increased bonding characteristics. The limiting moment and load-carrying capacities of the RC and GRC beams were determined with reference to limit state design principles. In order to compare the structural performance of the beams, two RC beams and two GRC beams with the size of 150 mm × 300 mm × 2100 mm were cast. The structural performances in terms of the load-carrying capacity, energy absorption, stiffness degradation, and ductility were examined. The results of the tests indicated that even though the load-carrying capacity of the GRC beams was slightly lower, they demonstrated enhanced performance by 42%, 40%, and 68% higher in the energy absorption, stiffness degradation, and ductility, respectively, than those of the RC beams on average. The augmented inelastic performance and better bonding properties of the GRC beams aid in noticeable structural performance.
1 December 2020 in IOP Conference Series: Materials Science and Engineering
Alkali activated slag composites are promising alternatives to be used as a replacement of Portland cement composites for different construction applications. However, despite the evolution of these composites over the years, its high drying shrinkage still poses a limitation on its application. The increasing interest in alkali-activated slag composites by the research community has resulted in the use of various methods and materials to mitigate the drying shrinkage. This current paper explores the different major types of mitigation techniques that can be used to reduce the drying shrinkage in alkali-activated composites. The mitigation techniques explored are in terms of the use of various materials and curing methods. Discussions presented in this paper showed that a significant reduction in the drying shrinkage can be achieved by partially replacing slag with mineral admixtures or incorporating chemical admixtures specifically made to reduce shrinkage. The use of appropriate internal or external curing method for alkali-activated slag was also found to reduce drying shrinkage effectively. However, it is recommended to carry out further research in order to fully understand the mechanism of drying shrinkage in alkali-activated slag composites in order to develop effective ways to mitigate it.