1. Department of Energy and Power Engineering, Henan University of Science and Technology, Luoyang 471003, China</br>
2. Longmen Laboratory, Luoyang 471000, China</br>
3. Henan Key Laboratory of Automobile Energy Saving and New Energy, Luoyang 471003, China
Dr. Haojie Li
1. Department of Energy and Power Engineering, Henan University of Science and Technology, Luoyang 471003, China</br>
2. Longmen Laboratory, Luoyang 471000, China</br>
3. Henan Key Laboratory of Automobile Energy Saving and New Energy, Luoyang 471003, China
The treatment of NO x has become an urgent issue due to it being difficult to degrade in air and its tremendous adverse impact on public health. Among numerous NO x emission control technologies, the technology of selective catalytic reduction (SCR) using ammonia (NH3) as the reducing agent (NH3-SCR) is regarded as the most effective and promising technique. However, the development and application of high-efficiency catalysts is severely limited due to the poisoning and deactivation effect by SO2 and H2O vapor in the low-temperature NH3-SCR technology. In this review, recent advances in the catalytic effects from increasing the rate of the activity in low-temperature NH3-SCR by manganese-based catalysts and the stability of resistance to H2O and SO2 during catalytic denitration are reviewed. In addition, the denitration reaction mechanism, metal modification, preparation methods, and structures of the catalyst are highlighted, and the challenges and potential solutions for the design of a catalytic system for degenerating NO x over Mn-based catalysts with high resistance of SO2 and H2O are discussed in detail.
Molecular sieve catalysts containing transition metals have been attracting attention for their potential applications in various fields, including environmental and industrial catalysis. A Cu-Ce-Zr/SAPO-34 series of molecular sieve catalysts were prepared by the impregnation method, and the effect of Zr introduction on the selective catalytic reduction of NO by Cu-Ce/SAPO-34 molecular sieve catalysts was explored. Through various characterization methods, the physical and chemical properties of the catalysts were analyzed, and the denitration mechanism of the molecular sieve catalyst was discussed. This study found that the total acid content of the acid sites on the catalyst surface decreased with the introduction of Zr, leading to a decrease in the denitration efficiency of the catalyst. At 350–400 °C, the denitration efficiency of the 4Cu-4Ce-4Zr/SAPO-34 catalyst was over 80%, and at 400–500 °C, it was over 99%. Moreover, excessive metal Zr could destroy its CHA structure and decrease the denitration efficiency of the catalyst. This study analyzed the reaction mechanism of NH3-SCR of Zr-modified polymetallic zeolites and the effect of Zr modification on the NH3-SCR reaction results. This study contributes to the understanding of the performance of molecular sieve catalysts containing transition metals. Reliable conclusions were obtained, which offer data support for future research in the field of NH3-SCR.
13 March 2025 in The Journal of Physical Chemistry A