This paper presents several mechanical models of a high-strength cable-driven dexterous manipulator designed for surgical procedures. A stiffness model is presented that distinguishes between contributions from the cables and the backbone. A physics-based model incorporating cable friction is developed and its predictions are compared with experimental data. The data show that under high tension and high curvature, the shape of the manipulator deviates significantly from a circular arc. However, simple parametric models can fit the shape with good accuracy. The motivating application for this study is to develop a model so that shape can be predicted using easily measured quantities such as tension, so that real-time navigation may be performed, especially in minimally-invasive surgical procedures, while reducing the need for hazardous imaging methods such as fluoroscopy.
Osteolysis is a debilitating condition that can occur behind the acetabular component of total hip replacements due to wear of the polyethylene liner. Conventional treatment techniques suggest replacing the component, while less-invasive approaches attempt to access and clean the lesion through the screw holes in the component. However, current rigid tools have been shown to access at most 50% of the lesion. Using a recently developed dexterous manipulator, we have adapted a group-theoretic convolution framework to define the manipulator's workspace and its ability to fully explore a lesion. We compared this with the experimental exploration of a printed model of the lesion. This convolution approach successfully contains the experimental results and shows over 98.8% volumetric coverage of a complex lesion. The results suggest this manipulator as a possible solution to accessing much of the area unreachable to the conventional less-invasive technique.
15 April 2016 in Journal of Computing and Information Science in Engineering
SUMMARY: Autonomous multi-agent systems show promise in countless applications, but can be hindered in environments where inter-agent communication is limited. In such cases, this paper considers a scenario where agents communicate intermittently through a cloud server. We derive a graph transformation mapping the kernel of a graph's Laplacian to a desired configuration vector while retaining graph topology characteristics. The transformation facilitates derivation of a self-triggered controller driving agents to prescribed configurations while regulating instances of inter-agent communication. Experimental validation of the theoretical results shows the self-triggered approach drives agents to a desired configuration using fewer control updates than traditional periodic implementations.
Over the last two decades, additive manufacturing (AM) or 3D printing technologies have become pervasive in both the public and private sectors. Despite this growth, there has been little to no deviation from the fundamental approach of building parts using planar layers. This undue reliance on a flat build surface limits part geometry and performance. To address these limitations, a new method of applying material onto or around existing surfaces with multilayer, thick features will be explored. Prior work proposes algorithms for defining conformal layers between existing and desired surfaces, however this work does not address the derivation of deposition paths, trajectories, or required hardware to achieve this new type of deposition. This paper presents (1) the derivation of deposition paths given a prescribed set of layers; (2) the design, characterization, and control of a proof-of-concept testbed; and (3) the derivation and application of time evolving trajectories subject to the material deposition constraints and mechanical constraints of the testbed. Derivations are presented in a general context with examples extending beyond the proposed testbed. Results show the feasibility of conformal material deposition (i.e., onto and around existing surfaces) with multilayer, thick features.
1 June 2024 in Journal of Verification, Validation and Uncertainty Quantification
The United States Navy (USN) intends to increase the amount of uncrewed aircraft in a carrier air wing. To support this increase, carrier-based uncrewed aircraft will be required to have some level of autonomy as there will be situations where a human cannot be in/on the loop. However, there is no existing and approved method to certify autonomy within Naval Aviation. In support of generating certification evidence for autonomy, the United States Naval Academy (USNA) has created a training and evaluation system (TES) to provide quantifiable metrics for feedback performance in autonomous systems. The preliminary use case for this work focuses on autonomous aerial refueling. Prior demonstrations of autonomous aerial refueling have leveraged a deep neural network (DNN) for processing visual feedback to approximate the relative position of an aerial refueling drogue. The training and evaluation system proposed in this work simulates the relative motion between the aerial refueling drogue and feedback camera system using industrial robotics. Ground-truth measurements of the pose between the camera and drogue are measured using a commercial motion capture system. Preliminary results demonstrate calibration methods providing ground-truth measurements with millimeter precision. Leveraging this calibration, the proposed system is capable of providing large-scale datasets for DNN training and evaluation against a precise ground truth.