In this paper, a series of N/O co-doped porous carbons (PCs) were designed and used to prepare coal tar pitch-based supercapacitors (SCs). The introduction of N/O species under the intervention of urea effectively improves the pseudocapacitance of PCs. The results show that the specific surface area of synthesized N3PC4‑700 is 1914 m2 g–1, while the N and O contents are 1.3 and 7.2%, respectively. The unique interconnected pore structure and proper organic N/O co-doping, especially the introduction of pyridine-N and pyrrole-N, are beneficial for improving the electrochemical performance of PCs. In the three-electrode system, the specific capacitance and rate capability of N3PC4‑700 are 532.5 F g–1 and 72.5% at the current densities of 0.5 and 20 A g–1, respectively. In addition, the specific capacitance of N3PC4‑700 in a coin-type symmetric device is 315.5 F g–1 at 0.5 A g–1. The N3PC4‑700 electrode provides an energy density of 43.8 W h kg–1 with a power density of 0.5 kW kg–1 and still maintains a value of 29.7 at 10 kW kg–1. After 10,000 charge/discharge cycles, the retention rate was as high as 96.7%. In order to obtain high-performance carbon-based SCs, the effective identification and regulation of organic N/O species is necessary.
MnO2@PCs (porous carbons) exhibiting high energy and power density are utilized as supercapacitor electrodes and prepared by impregnating porous carbons (PCs) derived from coal tar pitch (CTP) with KMnO4 as the manganese source. This study systematically investigates the impact of MnO2 loading on the microstructure and electrochemical performance in sample. It is found that the specific surface areas (SSA) of all MnO2@PCs significantly reduced compared to that of the PCs 2789 m2 g−1. The suggested mechanism might be a combination of the energy storage mechanism of dual layer capacitors with pseudo‐capacitance due to redox reactions of MnO2. Notably, MnO2@PCs‐0.0075 exhibits a maximum SSA of 1454.62 m2 g−1. Its specific capacitance reached 561 F g−1 at 0.5 A g−1, while the capacitance of the PCs increased by 81.5% to 309 F g−1. Remarkably, the Coulombic efficiency remained at 100%. The power density and energy density are determined in a two‐electrode test system to be 0.5 kW kg−1 and 58.01 Wh kg−1, respectively, at 0.5 A g−1. Concluding from these results and related literature, the MnO2 content significantly influences the electrochemical performance, suggesting that MnO2@PCs‐0.0075 could be a promising supercapacitor (SC) electrode material, provided its capacitance retention is enhanced.
In this paper, with coal tar pitch as the carbon source, porous carbon (PC) was prepared by one-step carbonization. To improve the energy density of coal tar pitch-based porous carbon, MoS2@PC was prepared by a hydrothermal method on a PC substrate. The effect of MoS2 loading on the structure and electrochemical properties of the sample was studied. The results show that the specific surface area of the MoS2@PC-0.3 synthesized is 3053 m(2) g(-1), and the large specific surface area provides sufficient attachment sites for the storage of electrolyte ions. In the three-electrode system, the specific capacitance of MoS2@PC-0.3 at 0.5 A g(-1) is 422.5 F g(-1), and the magnification performance is 57.3% at 20 A g(-1). After 10,000 charge/discharge cycles, the capacitance retention rate of the sample is 76.73%, with the Coulombic efficiency being 100%. In the two-electrode test system, the specific capacitance of MoS2@PC-0.3 at 0.5 A g(-1) is 321.4 F g(-1), with the power density and energy density being 500 W kg(-1) and 44.6 Wh kg(-1), respectively. At a current density of 20 A g(-1), the capacitance retention rate is 87.69% after 10,000 cycles. This study greatly improves the energy density of PC as the electrode material of supercapacitors.