MUHAMAD TAHRIRI ROZAINI

Mr. MUHAMAD TAHRIRI ROZAINI

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 September 2023 in Separations
Verified
Journal Article
Open access
PDF file
MRMUHAMAD TAHRIRI ROZAINI
MUHAMAD TAHRIRI ROZAINI
DGDenys Grekov
Denys Grekov
MBMohamad Azmi Bustam
Mohamad Azmi Bustam
PPPascaline Pré
Pascaline Pré
HKUST-1 is a metal-organic framework (MOF) that is widely studied as an adsorbent for CO2 capture because of its high adsorption capacity and good CO2/CH4 selectivity. However, the numerous synthesis routes for HKUST-1 often result in the obtention of MOF in powder form, which limits its application in industry. Here, we report the shaping of HKUST-1 powder via the extrusion method with the usage of bio-sourced polylactic acid (PLA) as a binder. The characterization of the composite was determined by XRD, FTIR, TGA and SEM analyses. The specific surface area was determined from the N2 adsorption isotherm, whereas the gas adsorption capacities were investigated via measurements of CO2 and CH4 isotherms of up to 10 bar at ambient temperature. The material characterization reveals that the composite preserves HKUST-1’s crystalline structure, morphology and textural properties. Furthermore, CO2 and CH4 adsorption isotherms show that there is no degradation of gravimetric gas adsorption capacity after shaping and the composite yields a similar isosteric adsorption heat as pristine HKUST-1 powder. However, some trade-offs could be observed, as the composite exhibits a lower bulk density than pristine HKUST-1 powder and PLA has no impact on pristine HKUST-1’s moisture stability. Overall, this study demonstrates the possibility of shaping commercial HKUST-1 powder, using PLA as a binder, into a larger solid-state-form adsorbent that is suitable for the separation of CO2 from CH4 with a well-preserved pristine MOF gas-adsorption performance.

30 April 2024 in Molecules
Verified
Journal Article
Open access
PDF file
MRMUHAMAD TAHRIRI ROZAINI
MUHAMAD TAHRIRI ROZAINI
DGDenys Grekov
Denys Grekov
MBMohamad Azmi Bustam
Mohamad Azmi Bustam
PPPascaline Pré
Pascaline Pré
HKUST−1 is an MOF adsorbent industrially produced in powder form and thus requires a post-shaping process for use as an adsorbent in fixed-bed separation processes. HKUST−1 is also sensitive to moisture, which degrades its crystalline structure. In this work, HKUST−1, in the form of crystalline powder, was extruded into pellets using a hydrophobic polymeric binder to improve its moisture stability. Thermoplastic polyurethane (TPU) was used for that purpose. The subsequent HKUST−1/TPU extrudate was then compared to HKUST−1/PLA extrudates synthesized with more hydrophilic polymer: polylactic acid (PLA), as the binder. The characterization of the composites was determined via XRD, TGA, SEM-EDS, and an N2 adsorption isotherm analysis. Meanwhile, the gas-separation performances of HKUST−1/TPU were investigated and compared with HKUST−1/PLA from measurements of CO2 and CH4 isotherms at three different temperatures, up to 10 bars. Lastly, the moisture stability of the composite materials was investigated via an aging analysis during storage under humid conditions. It is shown that HKUST−1’s crystalline structure was preserved in the HKUST−1/TPU extrudates. The composites also exhibited good thermal stability under 523 K, whilst their textural properties were not significantly modified compared with the pristine HKUST−1. Furthermore, both extrudates exhibited larger CO2 and CH4 adsorption capacities in comparison to the pristine HKUST−1. After three months of storage under atmospheric humid conditions, CO2 adsorption capacities were reduced to only 10% for HKUST−1/TPU, whereas reductions of about 25% and 54% were observed for HKUST−1/PLA and the pristine HKUST−1, respectively. This study demonstrates the interest in shaping MOF powders by extrusion using a hydrophobic thermoplastic binder to operate adsorbents with enhanced moisture stability in gas-separation columns.

8 April 2026
Verified
Thesis
Closed access
MRMUHAMAD TAHRIRI ROZAINI
MUHAMAD TAHRIRI ROZAINI
Elaboration de composites MOF-polymères pour la capture de CO2 par adsorption modulée en pression dans le contexte de l'enrichissement de biométhane: HKUST-1 est l’un des MOFs fréquemment étudiés comme adsorbant pour la séparation CO2/CH4 compte tenu de sa disponibilité commerciale et de grande capacité d’adsorption du CO2. Néanmoins, les voies de synthèse actuelles mises en oeuvre à l’échelle industrielle conduisent à l’obtention de poudres auxquelles des post-traitements de mise en forme sont nécessaires. La mise en forme de HKUST-1 par extrusion en utilisant deux liants thermoplastiques : TPU, (thermoplastic polyurethane) et PLA (polylactic acid) a été réalisé, dans le but de fabriquer un adsorbant avec une bonne tenue mécanique et une stabilité à l’humidité améliorée en vue de sa mise en oeuvre dans un procédé PSA. La caractérisation par DRX, MEB et ATG a confirmé la préservation de la structure cristalline du HKUST-1, ainsi que l’absence de dégradation thermique des composites jusqu'a 523 K. Les mesures d’isothermes d’adsorption CO2/CH4 mettent en évidence une augmentation des capacités d’adsorption en CO2 et CH4 des deux composites, de l’ordre de 16-30% par rapport au HKUST-1. Après un stockage prolongé des matériaux en conditions humides, HKUST-1/TPU et HKUST-1/PLA présentent respectivement des diminutions de 10% et 25% des capacités d’adsorption de CO2, contre 54% pour le HKUST-1 pur. Enfin, une simulation du procédé PSA en utilisant HKUST-1/PLA comme adsorbant, a été appliquée à un mélange équimolaire CO2/CH4. La simulation montre que la production d’un d’un raffinat enrichi en CH4 avec une pureté de 99,7%, est associé à un taux de récupération faible en CH4 de 22,6% et consommation d’énergie de 0,15 kWh. Nm-3 CH4, ce qui doit être amélioré en optimisant les paramètres du procédé.