Experimental investigations of the possibility of directly synthesizing nanodispersed crystalline phases of titanium dioxides with rutile and anatase structures in a hypervelocity jet of electroerosion plasma generated by a coaxial magnetoplasma accelerator with titanium electrodes are presented. A powder product containing nanosized polymorphic phases of titanium dioxide with a spherical shape of particles has been manufactured.
We experimentally studied the influence of the texture of copper and steel surfaces on the possibility of controlling the phase transition of water droplets in the single-phase regime. The texture of metals was formed by polishing and grinding, which corresponded to the finishing treatment of heat transfer surfaces in cooling systems for energy-saturated equipment. The samples were studied by microscopy and profilometry. The texture was estimated by three-dimensional roughness parameters. It was found that, with a 2–2.5-fold increase in roughness, the wetting of copper deteriorates (the contact angle increases from 66° to 93°), whereas the wetting of steel improves (the contact angle decreases from 89° to 71°). It was experimentally proven that, among the two main factors that affect the spreading diameter (wetting and roughness), wetting is the most significant. A hypothesis was formulated regarding the reason for the increase in the contact angle of 7–10° and the drop in the decrease rate of the contact diameter during the transition from the pinning to the mixed stage of droplet evaporation. It was found that an increase in the surface area of 0.1% leads to an increase in the total droplet evaporation rate of 4–6.5%.
19 September 2024 in Materials Chemistry and Physics
Expeditionary studies in the last decade yielded new data on the sedimentary layer structure in northeastern Barents shelf. Based on the constructed spatial model of deep temperatures and heat flow distribution, depths of the catagenetic transformation of hydrocarbons in the sedimentary cover of the northeastern Barents shelf are determined, as well spatial and quantitative correlation of the geothermic field with oil and gas localization is carried out. The calculated paleogeothermic models show the temperature distribution corresponding to the hydrocarbon maturation time.
Mixtures of nanoparticles and surfactants are attracting researchers’ interest from around the world for the development of chemically enhanced oil recovery. Nanoparticles modified with surfactants are able to adsorb at the oil–water interface reducing the interfacial tension or adsorb at the reservoir rock surface changing its wettability from oil-wet to water-wet. This change leads to an oil recovery increase. Therefore, in this work, we obtained Ti–O Magneli phases and carbon nanoparticles via the plasma dynamic method and in an electric arc, respectively. Subsequently, these nanoparticles were modified with an anionic surfactant and characterized by Fourier-transform infrared spectroscopy, X-ray fluorescence, thermogravimetric analysis, differential scanning calorimetry, and scanning and transmission electron microscopy. The stability and properties of dispersions were studied by tensiometry and dynamic and electrophoretic light scattering methods. It was shown that Ti–O Magneli phases (10–180 nm) and carbon (60–80 nm) nanoparticles modified in sodium dodecyl sulfate solutions formed stable dispersions in water. Furthermore, Ti–O nanoparticles and modified carbon nanoparticles effectively reduced the interfacial tension at the n-hexane/water interface.