Drilling pressure relief is a widely recognized and applied key technique to reduce the risk of rock burst occurrence, and its field-applied effects are also obvious. In this paper, the values of micro parameters required for discrete element method (DEM) simulations were first determined through indoor experiments and parameter calibration. Then, drilling pressure relief numerical simulations were conducted with different drilling diameters, drilling angles, and drilling depths. The results show that as the depth and diameter of the borehole increase, the peak strength of the coal sample first rapidly decreases, and then slowly decreases. The 30 mm depth and 14 mm diameter of the borehole are, respectively, the critical thresholds for the transition of the peak strength decrease rate; as the drilling angle increases, the peak strength of the coal sample first rapidly decreases and then increases, and the drilling angle of 25° is the critical threshold for the peak strength transformation. At the same time, the type of coal sample failure also changes from conjugate shear fracture to single slope shear fracture with the increase of three drilling parameters; shear and tensile cracks are the main types of micro fractures in coal samples. The research results are of great significance for improving the pressure relief plan of coal seam drilling and preventing and controlling rock burst disasters.
This paper focuses on the effect of fiber orientation on the resistance of seepage-induced erosion in fiber-reinforced sand. To clarify the discrepancy and mechanism of different-oriented fibers improving the resistance of the sand matrix, a series of DEM-Darcy coupling simulations were conducted. The microscopic parameters of fiber-reinforced sand were confirmed by the rigorous calibration procedure. The fibers perpendicular to the seepage direction were found to increase the difficulty of moving fluid through the specimen and significantly reduce the erosion rate of the specimen. These macroscopic behaviors acquired corresponding explanations at the mesoscopic scale, including the evolution of fiber-sand contact orientation, coordination number, average normal contact force, tensile force, and energy dissipation. According to the simulation results, it is found that the highest proportion of tensile force in perpendicular fibers can reach 80%, while the parallel fibers are only 40%, which indicates that the perpendicular fibers have a significant netting effect. The mesoscopic behaviors reasonably revealed the role of the fibers with different orientations on the sand matrix during the seepage. This study is beneficial for further understanding the mechanical behaviors of fiber-reinforced sand under seepage-induced erosion in safety engineering.