The rockburst dynamic disasters in the process of deep coal mining become more and more serious. Taking the rockburst occurred in the 23130 working face of Yuejin Coal Mine as the engineering background, we study the characteristics of mining stress field around roadway, the plastic failure morphological characteristics of surrounding rock and the accumulation/release law of elastic energy before and after burst. An analysis model quantitatively describing the physical process of rockburst in the mining roadway is established, and the calculation method of dynamic release of elastic energy in the physical process of rockburst is educed. The mechanism of rockburst in mining roadway is revealed. The results show that an “L-shaped” stress concentration zone is formed within 100 m of the 23130 working face, and the principal stress ratio of the surrounding rock of the transportation roadway is 2.59–4.26. The change of the direction of the maximum principal stress has a significant effect on the burst appearance characteristics. The failure strength of different sections of the mining roadway is characterized by the elastic energy release value. With the increase of the working face distance, the elastic energy released by burst failure and the expansion variation of failure boundary radius show a nonlinear variation law that tends to decrease steadily after sharp fluctuation. The closer to the working face, the higher the burst risk. At a distance of 10 m from the working surface, the maximum principal stress reaches its maximum value. The butterfly-shaped failure system generated by the surrounding rock of the roadway has energy self-sustainability, and the elastic energy released by the sudden expansion of the butterfly leaf is enough to cause a burst damage of 1.9 magnitude. This work could provide theoretical support for the prediction and prevention of rockburst.
Drilling pressure relief is a widely recognized and applied key technique to reduce the risk of rock burst occurrence, and its field-applied effects are also obvious. In this paper, the values of micro parameters required for discrete element method (DEM) simulations were first determined through indoor experiments and parameter calibration. Then, drilling pressure relief numerical simulations were conducted with different drilling diameters, drilling angles, and drilling depths. The results show that as the depth and diameter of the borehole increase, the peak strength of the coal sample first rapidly decreases, and then slowly decreases. The 30 mm depth and 14 mm diameter of the borehole are, respectively, the critical thresholds for the transition of the peak strength decrease rate; as the drilling angle increases, the peak strength of the coal sample first rapidly decreases and then increases, and the drilling angle of 25° is the critical threshold for the peak strength transformation. At the same time, the type of coal sample failure also changes from conjugate shear fracture to single slope shear fracture with the increase of three drilling parameters; shear and tensile cracks are the main types of micro fractures in coal samples. The research results are of great significance for improving the pressure relief plan of coal seam drilling and preventing and controlling rock burst disasters.
The precursor of rock failure around a hole has always been one of the research hotspots in the field of rock mechanics, and the distribution of the plastic zone is often adopted to reflect the location and form of rock failure. The shape of the plastic zone around a hole before rock failure can guide the mechanism of and early warning methods for geotechnical engineering disasters, while previous theoretical research and numerical simulation results show that the shape of the plastic zone around the hole is butterfly shaped under specific stress, which is referred to as butterfly failure theory. Studies also indicate that the butterfly shape of the plastic zone around a hole is considered to be the main cause of many disasters, which signifies the importance of studying the morphology of the plastic zone near rock failure. Therefore, this study is committed to finding the specific shape of the plastic zone near rock failure through relatively accurate and a high number of AE event location results, and the final experimental results show that the plastic zone around the hole is basically a butterfly shape near rock failure. This study verifies the correctness of the butterfly failure theory and provides an important reference for the study of geotechnical engineering disaster mechanisms and monitoring methods. The fact that the plastic zone in the early stage of rock failure in this study tends to be butterfly shaped preliminarily indicates the fractal law of rock failure. In the moment before rock failure, the distribution of AE events is more regular, which leads to large-scale collapse type failure.
The research on the formation factors of rock burst is one of the main research directions of rock mechanics in recent years, which is helpful to solve the problem of rock burst accidents. So, in this study, the calculation method of energy released during rock burst is first obtained by using different medium models, and then, the formation factors of rock bursts are obtained by comparing the calculation energy with the actual accident energy. The method of energy calculation utilizes the difference between elastoplastic and pure elastic models to innovatively quantify the specific values of energy released before and after the occurrence of the rock burst. It is considered that the stress and plastic zone state before the occurrence of rock burst have an important influence on the occurrence of the accident and are one of the formation factors, while the deviatoric stress field and butterfly-shaped plastic zone create conditions for greater energy release. In addition, the trigger stress constitutes another formation factor. The plastic zone state before rock failure is verified by the experimental test; the location distribution shape of acoustic emission (AE) events during the later stage of compression failure is approximately the same as theoretical result. The results also preliminarily indicated the fractal characteristics of acoustic emission events distribution before sample failure. The study obtained the formative factors of rock burst accident, which provides a new ideas and references for the research on the formation of rock bursts.
It is very necessary to study the mechanism of rock burst, which is related to the safe construction of many geotechnical projects. Previous studies have shown that small trigger stress will lead to large energy release, but the specific conditions that cause the release and how to quantify the energy are urgent problems to be solved. In this study, an innovative calculation method of rock mass energy release is proposed, and the calculated release energy is consistent with the monitoring results of field monitoring equipment. The revealed mechanism of rock burst reflected is that under the condition of a large-ratio pre-state stress field (mostly > 2.5), a small trigger stress field will lead to a large amount of energy release under “late butterfly shape” or “final butterfly shape” of the plastic zone. This study reveals the key factor of rock burst, which plays an important reference role for the mechanism research, subsequent monitoring and treatment method of rock burst.
The impact tendency of coal is a necessary condition for the occurrence of pressure bumping and a measure of the degree of damage. Through the combination of self-made lateral restraint device and high-speed camera, the variation law and failure mode of burst tendency index of coal samples under real-time drilling and pressure relief of lateral restraint under different loads were studied. The results show that: (1) With the increase of real-time drilling load under lateral constraints, the burst tendency index of coal samples changes. (2) The failure order of coal samples is as follows: the corner coal flakes peel off and pulverized coal is sprayed out, cracks and deformations are generated around the borehole, and finally the coal flakes peel off and the cracks penetrate to cause large-area damage of the coal samples. At the same time, the internal energy of the coal samples is released through borehole, which significantly reduces the damage of the coal samples. (3) The lateral restraint device makes the coal samples always in a stable state before and after drilling, resulting in the weakening effect of the burst tendency of the coal sample is not significant, and the pressure relief effect is not obvious. The research results can provide new ideas and methods for drilling and pressure relief test, and also provide basis and guidance for the prevention of pressure bumping in coal mines.