This work proposes and experimentally validates a 2D low- and medium-frequency fiber Bragg grating (FBG) acceleration sensor. The investigation of the vibration sensor uses a symmetrical circular flexure hinge structure with similar sensitivity in both measuring directions. The two FBGs are arranged differently to avoid a temperature impact; the sensitivity is double that of only one FBG fiber. First, the operating theory and theoretical system of the FBG accelerometer were analyzed. Second, the theoretical research and optimization improved the FBG sensor’s design, resonance frequency, and sensitivity. Third, the viability of the optimization findings and the simulation was evaluated using ANSYS software. Finally, the product was created, and the sensor calibration was performed using the simulation results. The theoretical values and experimental findings largely concur. According to performance tests, the resonance frequencies in the x- and y-direction are 440 and 500 Hz, respectively, with a flat frequency range from 20 to 300 Hz. Furthermore, the sensor shows average sensitivities along the two spatial dimensions of 124 and 83 pm/G, respectively. The overall anti-interference between the two measuring directions is less than 6%. This sensor is useful in various applications, including vibration monitoring, machine condition monitoring, and robotics.
This paper proposes a novel vibration sensor based on fiber Bragg grating (FBG) technology. The sensor employs a V-shaped flexure hinge structure, which is theoretically and experimentally demonstrated to enhance sensitivity for vibration sensing. The proposed design utilizes the V-shaped flexures hinge to focus the acceleration-induced strain, resulting in improved performance for vibration sensitivity. The implementation of the FBG sensor was evaluated through theoretical computations using MATLAB. The simulation software was also used to simulate the proposed structure and assess the parameters affecting its sensing performance. The experimental results of this work sensor demonstrate a sensitivity of 79.46 pm/G and a resonant frequency of 1140 Hz. The sensor’s operating frequency bandwidth was 30–320 Hz, while the temperature influence was measured at 8.5 pm/°C. In addition, the amplitude in the transverse direction was only 3% of the amplitude in the working principle, indicating that the presented sensor has solid lateral immunity. The experimental results were consistent with the simulation findings, demonstrating the presented vibration sensor’s good performance. The given work provides an opportunity to apply the FBG acceleration sensor in the high-dependability detection of low- and medium-frequency vibration signals.