Increased sedimentation is the main problem that affects dam efficiency by reducing storage capacity. Planning for dam construction and maintenance requires design strategies that heavily depend on integrated basin models, properly identifying principal sediment origins within the watershed and qualifying the sediment production rate. In this research work, the physically-based watershed SWAT model, defined as the Soil and Water Assessment Tool, was used to estimate the rate of sediment production for future dams in the Tata basin, located in southeast Morocco. The model was calibrated and tested for uncertainty by the employment of the algorithm Sequential Uncertainty Fitting-2. The outputs were used for assessing critical sediment source areas. Calibration and validation of the model were performed by monthly data. The values for Nash–Sutcliffe efficiency coefficient, Percent bias coefficient and determination coefficient (R²), respectively, during the calibration period 1990–1998 (0.96, −13% and 0.96) and the validation period 1999–2006 (0.77, + 11% and 0.93) indicate the accordance with the results obtained for the measured flow and the simulated flow values. The annual sediment yield of the Tata basin extends from 0 to 11 t/ha/y with a mean of 2.3 t/ha/y. The spatial distribution of these sediments varies from upstream to downstream. The downstream basin generated more sediment to the river per unit area, though it was less than the total amount of the basin for the upstream area. This variation is influenced by the increased downstream surface runoff and also by other characteristics of the basin such as slope and lithology. The low erosion places correspond to areas with lithological formations that are more resistant to erosion.

Snowfall, snowpack, and snowmelt are among the processes with the greatest influence on the water cycle in mountainous watersheds. Hydrological models may be significantly biased if snow estimations are inaccurate. However, the unavailability of in situ snow data with enough spatiotemporal resolution limits the application of spatially distributed models in snow-fed watersheds. This obliges numerous modellers to reduce their attention to the snowpack and its effect on water distribution, particularly when a portion of the watershed is predominately covered by snow. This research demonstrates the added value of remotely sensed snow cover products from the Moderate Resolution Imaging Spectroradiometer (MODIS) in evaluating the performance of hydrological models to estimate seasonal snow dynamics and discharge. The Soil and Water Assessment Tool (SWAT) model was used in this work to simulate discharge and snow processes in the Oued El Abid snow-dominated watershed. The model was calibrated and validated on a daily basis, for a long period (1981–2015), using four discharge-gauging stations. A spatially varied approach (snow parameters are varied spatially) and a lumped approach (snow parameters are unique across the whole watershed) have been compared. Remote sensing data provided by MODIS enabled the evaluation of the snow processes simulated by the SWAT model. Results illustrate that SWAT model discharge simulations were satisfactory to good according to the statistical criteria. In addition, the model was able to reasonably estimate the snow-covered area when comparing it to the MODIS daily snow cover product. When allowing snow parameters to vary spatially, SWAT model results were more consistent with the observed streamflow and the MODIS snow-covered area (MODIS-SCA). This paper provides an example of how hydrological modelling using SWAT and snow coverage products by remote sensing may be used together to examine seasonal snow cover and snow dynamics in the High Atlas watershed.

Streamflow modelling is crucial for developing successful long-term management, soil conservation planning, and water resource management strategies. The current work attempts to develop a robust hydrological model that simulates streamflow with the slightest uncertainty in the calibration...

In this paper, we attempted to review the erosion in the Ouergha watershed by applying two spatial approaches. The Ouergha watershed has an area of around 7300 km² representing approximately 18.2% of the Sebou basin of which it is the main tributary. In order to develop the erosion map using the SWAT model, it was important to prepare a large spatial database describing basin proprieties, furthermore, the daily hydro-climatic data. This model integrates MUSLE equation for the estimation of specific degradation. In addition, the estimation of erosion through SWAT was consolidated by constructing an erosion mapping through RUSLE method. This method was applied following an approach based on the use of remote sensing data and GIS tools to produce the major factors involved in the erosive process and their integration into RUSLE. The results obtained, in cartographic form, make it possible to target areas that require priority action for a larger-scale analysis, with a view to finding appropriate solutions to fight against erosion and protect the natural environment. Soil degradation in the Ouergha watershed is around 27 ton/ha/year (SWAT_MUSLE) and 25 ton/ha/year (RUSLE). Average sediment yield was estimated for Al Wahda dam of 10.4 Million tons.

In this study, we conducted a comprehensive assessment of flood susceptibility in the northern part of the large-scale Draa Oued Noun Basin DON using the modeling approach Analytic Hierarchy Process (AHP). These techniques were applied to integrate key hydrogeological, geomorphological, and...