Bijaya Basnet

Mr. Bijaya Basnet

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 March 2023 in Energies
Verified
Journal Article
Open access
PDF file
RDRajesh Dangi
Rajesh Dangi
BBBijaya Basnet
Bijaya Basnet
MPManoj Pandey
Manoj Pandey
SBSandip Bhusal
Sandip Bhusal
BBBiplab Budhathoki
Biplab Budhathoki
BKBhim Prashad Kafle
Bhim Prashad Kafle
Herein, we have prepared tin oxide (SnO2) nanoparticles (NPs), through a co-precipitation method, using SnCl2·2H2O dissolved in distilled water (DW) as a precursor. Then, the prepared NPs were heat treated in a muffle furnace, as a function of temperature, under an open atmosphere. The prepared SnO2 NPs were then re-dispersed in DW, followed by spray casting on a glass substrate, for preparing SnO2 thin films. The average thickness of the fabricated SnO2 thin films was 2.76 µm. We demonstrated a very clear variation in the structural, compositional, and morphological features of the different films (in particular, variation of the density of oxygen vacancies), which altered their electrical and optical properties. Raising the calcination temperature of the SnO2 thin films, from 250 °C to 650 °C, led to a monotonic reduction in the crystallite size, from 10.4 nm to 6.7 nm, and a decrease in the O/Sn ratio, from 5.60 to 4.79. A 14.5% decrease in the O/Sn ratio resulted in a decrease in the crystallite size by 3.7 nm (i.e., a 35.3% decrease in the NP size), and a decrease in the band gap of 0.11 eV. The lowering of the band gap, along with an increase in the oxygen vacancies in the films, accords well with previous studies. Besides, as the calcination temperature was raised, the refractive index and absorption coefficient values were also found to notably increase. Very interestingly, by simply altering the calcination temperature, we were able to produce SnO2 thin films with optical band gaps nearly equal to the fundamental band gap (2.96 eV), even though many earlier experimental studies had reported considerably greater values (3.36–4.24 eV). SnO2 thin films with lower oxygen vacancies exhibited relatively higher band gaps, which is likely to be favorable for the desired electron transport layer in perovskite solar cells.

7 February 2025 in Nature Communications
Verified
Journal Article
Open access
PDF file
BBBijaya Basnet
Bijaya Basnet
SPSathyanarayana Paladugu
Sathyanarayana Paladugu
OKOleksandr Kurochkin
Oleksandr Kurochkin
OBOleksandr Buluy
Oleksandr Buluy
NANatalie Aryasova
Natalie Aryasova
Oleg LavrentovichOleg Lavrentovich
Oleg Lavrentovich
Electric field-induced splay of molecular orientation, called the Fréedericksz transition, is a fundamental electro-optic phenomenon in nonpolar nematic liquid crystals. In a ferroelectric nematic NF with a spontaneous electric polarization $${{\bf{P}}}$$ P , the splay is suppressed since it produces bound electric charges. Here, we demonstrate that an alternating current (ac) electric field causes three patterns of NF polarization. At low voltages, $${{\bf{P}}}$$ P oscillates around the field-free orientation with no stationary deformations. As the voltage increases, the polarization acquires stationary distortions, first splay and twist in a stripe pattern and then splay and bend in a square lattice of +1 and -1 defects. In all patterns, $${{\bf{P}}}$$ P oscillates around the stationary orientations. The stationary bound charge is reduced by a geometrical “splay cancellation” mechanism that does not require free ions: the charge created by splay in one plane is reduced by splay of an opposite sign in the orthogonal plane.

6 May 2024 in Physical Review E
Verified
Journal Article
Closed access
PDF file
KTKamal Thapa
Kamal Thapa
OIOlena Iadlovska
Olena Iadlovska
BBBijaya Basnet
Bijaya Basnet
HWHao Wang
Hao Wang
APAyusha Paul
Ayusha Paul
Oleg LavrentovichOleg Lavrentovich
Oleg Lavrentovich
We explore the structure and magnetic-field response of edge dislocations in Grandjean-Cano wedge cells filled with chiral mixtures of the ferroelectric nematic mesogen DIO. Upon cooling, the ordering changes from paraelectric in the cholesteric phase N* to antiferroelectric in the smectic SmZA* and to ferroelectric in the cholesteric NF*. Dislocations of the Burgers vector b equal to the helicoidal pitch P are stable in all three phases, while dislocations with b=P/2 exist only in the N* and SmZA*. The b=P/2 dislocations split into pairs of τ−1/2λ+1/2 disclinations, while the thick dislocations b=P are pairs of nonsingular λ−1/2λ+1/2 disclinations. The polar order makes the τ−1/2 disclinations unstable in the NF* phase, as they should be connected to singular walls in the polarization field. We propose a model of transformation of the composite τ−1/2 line-wall defect into a nonsingular λ−1/2 disclination, which is paired up with a λ+1/2 line to form a b=P dislocation. The SmZA* behavior in the in-plane magnetic field is different from that of the NF* and N*: the dislocations show no zigzag instability, and the pitch remains unchanged in the magnetic fields up to 1 T. The behavior is associated with the finite compressibility of smectic layers.

22 September 2024 in Surface and Interface Analysis
Verified
Journal Article
Open access
BBBijaya Basnet
Bijaya Basnet
MNMahesh Nepal
Mahesh Nepal
GTGaurab J. Thapa
Gaurab J. Thapa
MKMadhav Kafle
Madhav Kafle
RKRam P. Kharel
Ram P. Kharel
BKBhim P. Kafle
Bhim P. Kafle
Thickness and optical constants of transparent conducting oxide (TCO) of metal oxide thin films have been commonly estimated by invoking theoretical models based on measured optical reflectance or transmittance. One of such widely employed models is reflectance‐based Kushev model. However, the relatively higher value of the absorption coefficient at the absorption edge of TCOs of metal oxide thin films results in a large deviation of their thickness values estimated by this model. To address the underlying problems, in the present work, we have improved the Kushev model. Specifically, for minimizing the error in the estimated thickness values from the proposed model, we have employed t test for discarding outliers of a set of thickness values of a given thin film, which were calculated from nearby extrema of a reflectance curve. Then the thickness calculated from model was validated by comparing the value of ZnO thin transparent films extracted from ellipsometric measurement. Our model shows excellent agreement with the thickness values of ZnO films from ellipsometric measurement with only 1.2% deviation. Furthermore, observed values were also compared with the values from already established Cauchy model. The perfectly matching of the simulated reflectance spectra from the present model with the measured reflectance and excellent agreement of thickness values derived from the ellipsometric measurements with the values extracted from the model may infer us that the present model is suitable for fairly accurately estimating film thicknesses of TCO thin films.

13 November 2025 in Advanced Science
Verified
Journal Article
Open access
BBBijaya Basnet
Bijaya Basnet
PKPriyanka Kumari
Priyanka Kumari
SPSathyanarayana Paladugu
Sathyanarayana Paladugu
DPDamian Pociecha
Damian Pociecha
JKJakub Karcz
Jakub Karcz
Oleg LavrentovichOleg Lavrentovich
Oleg Lavrentovich
Surface alignment and edge dislocations are explored in the recently discovered twist‐bend ferroelectric nematic, N TBF , in which the vector of spontaneous polarization follows an oblique helicoidal trajectory around a polar twist‐bend axis. In a planar cell, the polar axis aligns at some angle to the rubbing direction to mitigate the surface electric charge. It is demonstrated that the pseudolayers in planar cells form chevron defects, a hallmark defect of one‐dimensionally positionally ordered phases, such as smectic A and smectic C. The polar character of the twist‐bend axis prevents the cores of N TBF edge dislocations from splitting into semi‐integer disclinations, in stark contrast to dislocations in paraelectric and ferroelectric chiral nematics. The tilt of pseudolayers around the defect core allows estimation of the elastic penetration length as being close to the pitch of N TBF . Compression/dilation stresses around the core modify the heliconical tilt angle of molecules as evidenced by a substantial variation in local birefringence. The climb of dislocations exhibits high mobility, allowing the system to equilibrate the temperature‐dependent pitch. The uncovered properties facilitate the development of N TBF materials for electro‐optical applications, such as electrically controlled diffraction lattices and structural colors.

24 November 2022 in arXiv
Verified
Preprint
Open access
PDF file
MPManoj Pandey
Manoj Pandey
DHDipendra Hamal
Dipendra Hamal
BBBijaya Basnet
Bijaya Basnet
BKBhim Prashad Kafle
Bhim Prashad Kafle
Solvent engineering offers fine control over the photovoltaic efficiency, film morphology, and crystallization quality of perovskite films and also enables to optimize light transmittance and absorbance in solar cell applications. In the present work, the band gap and reflectance were reduced through solvent engineering. We found that perovskite thin films produced using DMF (Dimethyl formamide) solvent had a band gap that was 0.24 eV less than those produced using IPA (Isopropyl Alcohol) solvent. Perovskite thin films produced using DMF solvent also exhibited considerably lower solar spectrum reflectance.