A free-space communication based on a mid-infrared quantum cascade laser (QCL) is presented. A room-temperature continuous-wave distributed-feedback (DFB) QCL combined with a mid-infrared detector comprise the basic unit of the communication system. Sinusoidal signals at a highest frequency of 40 MHz and modulated video signals with a carrier frequency of 30 MHz were successfully transmitted with this experimental setup. Our research has provided a proof-of-concept demonstration of space optical communication application with QCL. The highest operation frequency of our setup was determined by the circuit-limited modulation bandwidth. A high performance communication system can be obtained with improved modulation circuit system.
Topological lasers (TLs) have attracted widespread attention due to their mode robustness against perturbations or defects. Among them, electrically pumped TLs have gained extensive research interest due to their advantages of compact size and easy integration. Nevertheless, limited studies on electrically pumped TLs have been reported in the terahertz (THz) and telecom wavelength ranges with relatively low output powers, causing a wide gap between practical applications. Here, we introduce a surface metallic Dirac-vortex cavity (SMDC) design to solve the difficulty of increasing power for electrically pumped TLs in the THz spectral range. Due to the strong coupling between the SMDC and the active region, robust 2D topological defect lasing modes are obtained. More importantly, enough gain and large radiative efficiency provided by the SMDC bring in the increase of the output power to a maximum peak power of 150 mW which demonstrates the practical application potential of electrically pumped TLs.
Two-dimensional anisotropic materials have been widely concerned by researchers because of their great application potential in the field of polarized detector devices and optical elements, which is a very important and popular research direction at present. As a IV–V two-dimensional material, silicon phosphide (SiP) has obvious in-plane anisotropy and exhibits excellent optical and electrical anisotropy properties. Herein, the optical anisotropy of SiP is studied by spectrometric ellipsometry measurements and polarization-resolved optical microscopy, and its electrical anisotropy is tested by SiP-based field-effect transistor. In addition, the normal and anisotropic photoelectric performance of SiP is shown by fabricating a photodetector and measuring it. In various measurements, SiP exhibits obvious anisotropy and good photoelectric performance. This work provides basic optical, electrical, and photoelectric performance information of SiP, and lays a foundation for further study of SiP and applications of SiP-based devices.
We demonstrated an unambiguous quantum dot cascade laser based on InGaAs/GaAs/InAs/InAlAs heterostructure by making use of self-assembled quantum dots in the Stranski-Krastanow growth mode and two-step strain compensation active region design. The prototype generates stimulated emission at λ ~ 6.15 μm and a broad electroluminescence band with full width at half maximum over 3 μm. The characteristic temperature for the threshold current density within the temperature range of 82 to 162 K is up to 400 K. Moreover, our materials show the strong perpendicular mid-infrared response at about 1,900 cm-1. These results are very promising for extending the present laser concept to terahertz quantum cascade laser, which would lead to room temperature operation.
In this article, we report a high-performance λ ~ 4.6 μm quantum cascade laser grown by metal-organic chemical vapor deposition. Continuous wave power of 3 W was obtained from an 8 mm-long and 7.5 μm wide coated laser at 285 K. The maximum pulsed and CW wall-plug efficiency reached 15.4% and 10.4%, respectively. The device performance shows the great potential of metal-organic chemical vapor deposition growth for quantum cascade material and devices.