Topological lasers (TLs) have attracted widespread attention due to their mode robustness against perturbations or defects. Among them, electrically pumped TLs have gained extensive research interest due to their advantages of compact size and easy integration. Nevertheless, limited studies on electrically pumped TLs have been reported in the terahertz (THz) and telecom wavelength ranges with relatively low output powers, causing a wide gap between practical applications. Here, we introduce a surface metallic Dirac-vortex cavity (SMDC) design to solve the difficulty of increasing power for electrically pumped TLs in the THz spectral range. Due to the strong coupling between the SMDC and the active region, robust 2D topological defect lasing modes are obtained. More importantly, enough gain and large radiative efficiency provided by the SMDC bring in the increase of the output power to a maximum peak power of 150 mW which demonstrates the practical application potential of electrically pumped TLs.
High-power terahertz (THz) quantum cascade laser, as an emerging THz solid-state radiation source, is attracting attention for numerous applications including medicine, sensing, and communication. However, due to the sub-wavelength confinement of the waveguide structure, direct beam brightness upscaling with device area remains elusive due to several mode competition and external optical lens is normally used to enhance the THz beam brightness. Here, we propose a metallic THz photonic crystal resonator with a phase-engineered design for single mode surface emission over a broad area. The quantum cascade surface-emitting laser is capable of delivering an output peak power over 185 mW with a narrow beam divergence of 4.4° × 4.4° at 3.88 THz. A high beam brightness of 1.6 × 107 W sr−1m−2 with near-diffraction-limited M2 factors of 1.4 in both vertical and lateral directions is achieved from a large device area of 1.6 × 1.6 mm2 without using any optical lenses. The adjustable phase shift between the lattices enables a stable and high-intensity surface emission over a broad device area, which makes it an ideal light extractor for large-scale THz emitters. Our research paves the way to high brightness solid-state THz lasers and facilitates new applications in standoff THz imaging, detection, and diagnosis.
In this article, we report a high power quantum cascade laser (QCL) at λ 7.4 µm with a broad tuning range. By carefully designing and optimizing the active region and waveguide structure, a continuous-wave (CW) output power up to 1.36 W and 0.5 W is achieved at 293 K and 373 K which shows the excellent temperature stability. A high wall-plug efficiency (WPE) of 8% and 13.6% in CW and pulsed mode at 293 K are demonstrated. The laser shows a characteristic temperature T0 of 224 K and T1 of 381 K over a temperature range from 283 K to 373 K. In addition, a far field of pure zero order transverse mode and a fairly wide external cavity (EC) tuning range (280 cm-1) from 6.54 µm to 8 µm are achieved in pulsed operation. In addition, an EC single mode output power of 226 mW is obtained under CW operation at 293K.
The photonic crystal surface-emitting laser (PCSEL) has attracted much attention due to the advantages of a small far-field divergence angle and high output power. Here, we report a high-power terahertz (THz) photonic crystal laser with high beam quality through the optimization of the absorption boundary condition and the introduction of the symmetrically distributed electrodes. Single-mode surface emission at 3.4 THz with the maximum peak output power of 50 mW is demonstrated. Meanwhile, a high symmetric far-field pattern with C6 symmetry and a small divergence angle is achieved. In this device, the integration of the stable single-mode operation, high beam quality and high output power is realized, which may have great significance for practical applications.
High-power and high-beam-quality terahertz (THz) quantum cascade laser as an emerging THz radiation solid-state source are attracting attentions for numerous applications including medicine, sensing, and communication. However, due to the sub-wavelength confinement of the waveguide structure, direct beam brightness upscaling with device area remains elusive due to several mode competition and external optical lens is normally used to enhance the THz beam brightness. Here, we propose a metallic THz double-lattice photonic crystal resonator with engineered phase design for single mode surface emission over a broad area. The quantum cascade surface-emitting laser is capable of delivering an output peak power over 185 mW with a narrow beam divergence of 4.4°×4.4° at 3.88 THz. A near-diffraction-limited beam with M2 factor of 1.4 in both directions and a high beam brightness of 1.6×107 W sr−1m−2 is achieved from a large device area of 1.6×1.6 mm2 without using any optical lenses. The adjustable phase shift between the lattices enables stable and high-intensity surface emission over a broad device area, which makes it an ideal light extractor for broad-area THz emitters. Our research paves the way to high brightness THz laser sources and facilitates new applications in standoff THz imaging, detection, and diagnosis.