Ainhoa Pujana

Ms. Ainhoa Pujana

orcid

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 December 2015 in Superconductor Science and Technology
Verified
Journal Article
Closed access
PDF file
IMI Marino
I Marino
APAinhoa Pujana
Ainhoa Pujana
GSG Sarmiento
G Sarmiento
SSS Sanz
S Sanz
JMJ M Merino
J M Merino
TCT Canosa
T Canosa
The offshore wind market demands a higher power rate and more reliable turbines in order to optimize capital and operational costs. The state-of-the-art shows that both geared and direct-drive conventional generators are difficult to scale up to 10 MW and beyond due to their huge size and weight. Superconducting direct-drive wind generators are considered a promising solution to achieve lighter weight machines. This work presents an innovative 10 MW 8.1 rpm direct-drive partial superconducting generator using MgB 2 wire for the field coils. It has a warm iron rotor configuration with the superconducting coils working at 20 K while the rotor core and the armature are at ambient temperature. A cooling system based on cryocoolers installed in the rotor extracts the heat from the superconducting coils by conduction. The generator’s main parameters are compared against a permanent magnet reference machine, showing a significant weight and size reduction. The 10 MW superconducting generator concept will be experimentally validated with a small-scale magnetic machine, which has innovative components such as superconducting coils, modular cryostats and cooling systems, and will have similar size and characteristics as the 10 MW generator.

12 January 2023 in Energies
Verified
Journal Article
Open access
PDF file
APAinhoa Pujana
Ainhoa Pujana
MEMiguel Esteras
Miguel Esteras
EPEugenio Perea
Eugenio Perea
EMErik Maqueda
Erik Maqueda
PCPhilippe Calvez
Philippe Calvez
Computer modelling and digitalization are integral to the wind energy sector since they provide tools with which to improve the design and performance of wind turbines, and thus reduce both capital and operational costs. The massive sensor rollout and increase in big data processing capacity over the last decade has made data collection and analysis more efficient, allowing for the development and use of digital twins. This paper presents a methodology for developing a hybrid-model-based digital twin (DT) of a power conversion system of wind turbines. This DT allows knowledge to be acquired from real operation data while preserving physical design relationships, can generate synthetic data from events that never happened, and helps in the detection and classification of different failure conditions. Starting from an initial physics-based model of a wind turbine drivetrain, which is trained with real data, the proposed methodology has two major innovative outcomes. The first innovation aspect is the application of generative stochastic models coupled with a hybrid-model-based digital twin (DT) for the creation of synthetic failure data based on real anomalies observed in SCADA data. The second innovation aspect is the classification of failures based on machine learning techniques, that allows anomaly conditions to be identified in the operation of the wind turbine. Firstly, technique and methodology were contrasted and validated with operation data of a real wind farm owned by Engie, including labelled failure conditions. Although the selected use case technology is based on a double-fed induction generator (DFIG) and its corresponding partial-scale power converter, the methodology could be applied to other wind conversion technologies.

3 February 2016 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
GSGustavo Sarmiento
Gustavo Sarmiento
SSSantiago Sanz
Santiago Sanz
APAinhoa Pujana
Ainhoa Pujana
JMJose Maria Merino
Jose Maria Merino
IMIker Marino
Iker Marino
GGGianni Grasso
Gianni Grasso
Superconducting MgB 2 coils have a promising application niche in large wind generators. The potential implementation as field coils results in machines with smaller size and reduced weight, which is a real benefit compared to conventional nonsuperconducting alternatives. This is a key factor where the wind market demands higher power rate and more compact turbines in order to optimize capital and operational costs. Under the SUPRAPOWER project, a 10-MW direct-drive wind generator concept will be probed through an experimental validator, with superconducting rotating dc coils. For the required temperature, current density, and magnetic field, the available commercial MgB 2 wire has been selected, as it is cost effective and well suited compared to other solutions. The aim of the present work is to analyze the operational conditions of MgB 2 dc field coils, which are cryogen-free cooled and developed in accordance with SUPRAPOWER generator requirements. This paper deals with the design, manufacturing, and experimental results of full-scale superconducting coils.

1 September 2012
Verified
Conference Paper
Closed access
AZAlberto Zapico
Alberto Zapico
IGIgor Gabiola
Igor Gabiola
SASusana Apinaniz
Susana Apinaniz
FSFrancisco Santiago
Francisco Santiago
APAinhoa Pujana
Ainhoa Pujana
FBFernando Briz
Fernando Briz
Development of new wide band gap (WBG) power devices, and among them, of Silicon Carbide (SiC) power devices, has been an active field of research during the last years. Potential advantages SiC devices over their Si counterparts include a significantly higher breakdown field, higher operating temperatures as well as higher switching frequencies. However, manufacturing of SiC power devices is not a mature technology yet, their performance being far from their potential limits. A comparison between SiC and Silicon (Si) power devices is presented in this paper. Three different power devices are analyzed, with the aim of verifying the theoretical improvement in the performance of SiC over Si transistors: SiC JFET, SiC MOSFET and Si IGBT. A boost DC to DC converter topology will be used for this purpose, the European Efficiency being used as a figure of merit to evaluate the performance of each semiconductor. An input voltage varying from 250 V to 500 V, an output voltage of 600 V and 3 kW of nominal output power has been developed and tested.

3 November 2025 in IEEE Access
Verified
Journal Article
Open access
JPJesús Mauricio Pérez-García
Jesús Mauricio Pérez-García
PEPablo Eguia
Pablo Eguia
EOEugenio Perea Olabarria
Eugenio Perea Olabarria
APAinhoa Pujana
Ainhoa Pujana
Konstantinos N. GyftakisKonstantinos N. Gyftakis
Konstantinos N. Gyftakis
JGJose Manuel Guerrero
Jose Manuel Guerrero
Fault diagnosis in electrical systems is crucial for preventing infrastructure damage, cascading faults, and user injuries. In addition, power converters have become essential due to the rise of renewable energy, the electric mobility, HVDC systems, and other emerging technologies. However, they pose a challenge for fault diagnosis and protection due to high frequency switching noises, different AC and DC stages in the same circuitry and faster aging of insulation materials. Since ground faults are the most common type of electric faults, it is of special interest to analyze and understand the complication and limitations of the current diagnosis and protection systems. Although several techniques exist for detecting or localizing these types of faults, they require complex processes for carrying out the diagnosis. This work provides a comprehensive analysis of the different conventional and advanced methods focused on ground fault diagnosis that are used, not only for distribution and transmission lines, but also for either AC, DC or hybrid systems, which comprise electrical machines, power electronics, drives, HVDC systems, energy storage systems, microgrids, etc. It gives a complete overview of each method, highlighting their advantages and disadvantages. Finally, a discussion is provided studying areas of improvement and the latest emerging trends in the field, where artificial intelligence (AI) and machine learning (ML) techniques are gaining momentum.

4 December 2017 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
JSJiuce Sun
Jiuce Sun
HNHolger Neumann
Holger Neumann
SSSantiago Sanz
Santiago Sanz
GSGustavo Sarmiento
Gustavo Sarmiento
MTMatteo Tropeano
Matteo Tropeano
JMJose Maria Merino
Jose Maria Merino
The SUPRAPOWER, an EU FP7 funded research project, is developing an innovative 10 MW class superconducting generator to provide an important breakthrough in the offshore wind industry. Benefiting from the modular concept, the key challenges of such innovative 10 MW generator e.g. the modular superconducting coil and associated cryogenic systems could be validated through a scale-down rotating magnetic validator. The cryogenic cooling system for the RMV consists two modular cryostats, a distributing cryostat and the corresponding rotating cryocooler system with a self-developed rotary joint. In order to achieve the SC coils working temperature of 20 K, a two-stage G-M cryocool-er will be applied and linked to the two modular cryostats by means of conductive copper connection. The distributing cryostat was developed to envelop the cold head of the cryocooler, the thermal link, and three binary current leads to feed electrically the coils. A rotary joint with Ferrofluid sealing was developed to transfer the helium gas between the rotating cold head and sta-tionary oil-lubricated compressor. In this paper, the design, manufacture and assembly of this cryogenic system for RMV will be presented in details.