Incessant generation and mismanagement of industrial waste, resource scarcity, and environmental degradation have created non-sustainability in human life. Though industrial wastes are hazardous or non-hazardous in nature based on their source, open dumping disposal is commonly done for both types of waste. The adversity associated with waste enhances the environmental and health impacts. However, this waste has the potential to recycle and minimize resource scarcity. The circular economy works on the concept of reuse, recycling, and recovery to convert waste into a resource. Thus, industrial waste can benefit the environment and economic growth to build industrial ecology. However, the opportunities and challenges associated with industrial ecology for the reuse and recycling of waste have to be identified and preserved. Therefore, this study has identified challenges associated with waste, analyzed their impact, and industrial regulations, prioritized their criticality, and developed solution strategies to alleviate them. Two case studies on industrial byproducts, i.e., fly ash and red mud, based on different income groups are discussed in this study. It highlights the circular economy has minimized waste generation and enhanced the recovery of secondary resource materials. In addition, this study supports achieving the sustainable development goals (SDGs) 11 and 12 to build a sustainable industrial ecosystem.
The present study investigated the resource circulation of precious metals (Pt and Pd) from exhausted catalytic-converters using a green integrative approach of bio-solvo-chemical techniques. Herein, the used biogenic cyanide as a lixiviant medium was produced via the oxidative decarboxylation of glycine during the late exponential growth phase of Chromobacterium violaceum. The advantage of microbial activity was utilized in two-fold: (i) in situ production of the bio-cyanide lixiviant and (ii) bio-destruction of residual cyanide from the Pt/Pd-depleted bleed solution. More than 95% of Pt and Pd were efficiently dissolved in bio-cyanide solution by autoclaving under the optimized condition of temperature, 150 °C; pO2, 14 bar; and time, 120 min. Furthermore, the solvo-chemical extraction of the Pt/Pd-cyanide complex was performed using a green ionic-liquid solvent (Cyphos IL101). The parametric studies revealed that >96% Pt and Pd were extracted under the optimal conditions of ionic-liquid concentration, 0.15 mol L−1; extraction pH, 10.4; and temperature, 20 °C. The extraction thermodynamics yielded negative values of enthalpy changes (i.e., , −39.8 kJ mol−1 and , −34.9 kJ mol−1), which indicated the exothermic characteristics of outer-sphere coordination between the ionic-liquid and Pt/Pd(CN)42− compounds. Subsequently, an excellent selectivity on Pd and Pt stripping from the loaded organic phase was achieved by sequential contact with 2.0 mol L−1 NH4SCN and 1.5 mol L−1 S(CH2CH2OH)2 solutions. The tested recyclability of cyanide-bearing raffinate, regeneration and reusability of the ionic-liquid, and bio-degradation of cyanide-bleed solution drive the process towards zero-discharge of toxic substances. Significantly low-emission exploitation of precious metals (reduced from 10.8 × 106 to only 1.63 t CO2-e) from the waste materials with a sustainable process index value of 0.0145 cap per kg reveals that the process is suitable for sustainable development.
9 April 2020 in Environmental Engineering Research
In accordance with the Paris Climate Agreement (COP21) and Sustainable Development Goals (SDGs), India is greatly focused on deployment of renewable energy (RE) for supplementing the energy requirements of the country. The present article assesses the validity of the promises offered by RE technologies in India and its necessary action to understand the gap between setting goals and the ground situation, which can also show a pathway to other developing countries. Therefore, the long-term projection perspectives on RE growth have been made using the India Energy Security Scenario-2047. In order to achieve the set target for emissions reduction of greenhouse gases (GHGs) i.e., 1209 MT CO2e in support of SDGs to the 2005 level by 2030, three renewable growth scenarios have been tested for transitioning the Indian energy system. Accordingly, the regression analysis reveals that the most desirable growth scenario will require a steady rise of RE contribution in the overall energy mix of India by 2030 from the current ~21% to 68% of the installed capacity. In this view, the present study highlights the exploration of new alternatives in long-term energy planning, and less on one-sided scenario to achieve the emissions’ reduction target.
1 December 1997 in The Journal of Organic Chemistry