Research on manufacturing components for electric vehicles plays a vital role in their development. Furthermore, significant advancements in additive manufacturing processes have revolutionized the production of various parts. By establishing a system that enables the recovery, processing, and reuse of metal powders essential for additive manufacturing, we can achieve sustainable production of electric vehicles. This approach holds immense importance in terms of reducing manufacturing costs, expanding the market, and safeguarding the environment. In this study, we developed an additive manufacturing system for recycled metal powders, encompassing powder variety, properties, processing, manufacturing, component properties, and applications. This system was used to create a knowledge graph providing a convenient resource for researchers to understand the entire procedure from recycling to application. To improve the graph’s accuracy, we employed ChatGPT and BERT training. We also demonstrated the knowledge graph’s utility by processing recycled 316 L stainless steel powders and assessing their quality through image processing. This experiment serves as a practical example of recycling and analyzing powders using the established knowledge graph.
This paper presents a comprehensive study on autonomous vehicle parking challenges, focusing on kinematic and reverse parking models. The research develops models for various scenarios, including turning, reverse, vertical, and parallel parking while using the minimum turning radius solution. The integration of the A* algorithm enhances trajectory optimization and obstacle avoidance. Innovative concepts like NTBPT and B-spline theory improve computational optimization. This study provides a foundation for understanding the dynamics and constraints of autonomous parking. The proposed model enhances efficiency and safety, reducing algorithm complexity and improving trajectory optimization. This research offers valuable insights and methodologies for addressing autonomous vehicle parking challenges and advocates for advancements in automated parking systems.
The indoor positioning technology of an ultra-wideband (UWB) can play an excellent supplementary role in satellite navigation and has broad application prospects. However, if strong interference exists, the measurement data based on UWB will fluctuate abnormally, which seriously affects the accuracy of positioning. In view of the above problems, based on the combination of mathematical modeling, this paper starts from the subject data, and proposes a positioning method suitable for non-interference/interference conditions and an abnormal data identification method to improve the positioning accuracy. The specific scheme includes data preprocessing model establishment and solution, positioning model establishment and solution, migration application of positioning model, interfering data identification model establishment and solution, and movement track positioning model establishment and solution.
Cold orbital forging (COF) as an advanced incremental metal-forming technology has been widely used in processing vehicle parts. During the COF process, the vibration on the COF machine injures the service life of the machine and the quality of the forged part. The study of the vibration control of the COF machine is therefore necessary. In this study, the dynamic model of the COF machine is established, and the vibration performances of some key positions are obtained using Matlab&Simulink software. Subsequently, the vibration performances are effectively verified by conducting a vibration test experiment. Based on the dynamics model of the COF machine and Matlab&Simulink software, least-mean-squares (LMS), recursive least-squares (RLS) and OCTAVE vibration-control algorithms are applied to reduce the vibration. Comparing the vibration performances of the COF machine, these vibration-control algorithms are useful for reducing the vibration of the machine, which improves the service life of the machine and the quality of the forged part. Based on the vibration performances of the COF machine, the effects of LMS and RLS vibration controls are better than the OCTAVE, and they also obviously reduce the vibration of the COF machine. The vibration-control algorithms are first to be applied to reduce the vibration of the COF machines in this study, which will be beneficial to future research on the vibration controls of metal-forming machines and other mechanical systems.
This study aims to verify the feasibility and effectiveness of an automatic feeding system in the ceramic clay-forming process. Through a series of clay-forming experiments, the system’s performance under various process parameters was examined. Precision sensors and data recording devices were used to monitor and record key data during the experimental process in real-time. The results demonstrate that the automatic feeding system can supply clay steadily and continuously under set parameters, ensuring a smooth forming process and significantly improving efficiency. Quantitatively, the system achieved a 30% increase in Vickers hardness, reflecting enhanced mechanical properties of the formed clay bodies. Additionally, there was a notable improvement in axial stress–strain characteristics, indicating better structural integrity and consistency. These improvements reduced human errors and material waste, enhancing production efficiency and product quality. Future research will focus on further optimizing system design and exploring its applications in a broader range of ceramic manufacturing processes.