With the growing demand for aero-engine turbine blades, the resource consumption and environmental impact of superalloy powder in the manufacturing process have become increasingly significant. This study focuses on IN718 nickel-based superalloy powder and establishes a recycling method based on powder mixing. By mixing sieved recycled powder with new powder at a 1:1 mass ratio, comprehensive characterization tests, including powder morphology analysis, particle size distribution, blade printability evaluation, mechanical property tests (tensile strength at both 25 °C and 650 °C), and microhardness measurements, demonstrated that the blended powder maintained performance characteristics comparable to new powder, with no statistically significant differences observed. Furthermore, this study introduces the life cycle assessment (LCA) methodology into the field of superalloy powder recycling, providing a novel technical approach for sustainable development in aerospace manufacturing. A quantitative analysis of environmental impacts throughout the blended powder recycling process indicates that this method can reduce carbon emissions by 45% and energy consumption by 48%.
The pottery wheel machine is an essential piece of equipment in ceramics manufacturing. This paper presents the design of an intelligent pottery wheel machine aimed at addressing the issues of low clay material utilization and the challenges of pottery throwing operations. Traditional techniques require exceptional craftsmanship and proficient mechanical operation, and existing pottery wheel machines still demand attention to equipment usage and clay material knowledge. The intelligent pottery wheel machine integrates central positioning, automatic clay feeding, and clay storage. The pull mechanism stores and precisely feeds clay, regulating usage and minimizing excess. The automated settings of the clay storage and power push system replace the need for manual assessment of clay density and quality, ensuring balanced and high-quality clay extrusion. The continuous feeding setting allows for automatic addition of clay, saving replenishment time and reducing the labor intensity of adding clay. The lifting mechanism ensures that the clay body remains centered, avoiding repeated manual adjustments and allowing users to focus on creating pottery rather than spending excessive time mastering the centering technique. The machine’s lightweight, modular design reduces clay waste, making the process more sustainable. By saving clay materials and improving throwing efficiency, it enhances the success rate of throwing.
This study aims to verify the feasibility and effectiveness of an automatic feeding system in the ceramic clay-forming process. Through a series of clay-forming experiments, the system’s performance under various process parameters was examined. Precision sensors and data recording devices were used to monitor and record key data during the experimental process in real-time. The results demonstrate that the automatic feeding system can supply clay steadily and continuously under set parameters, ensuring a smooth forming process and significantly improving efficiency. Quantitatively, the system achieved a 30% increase in Vickers hardness, reflecting enhanced mechanical properties of the formed clay bodies. Additionally, there was a notable improvement in axial stress–strain characteristics, indicating better structural integrity and consistency. These improvements reduced human errors and material waste, enhancing production efficiency and product quality. Future research will focus on further optimizing system design and exploring its applications in a broader range of ceramic manufacturing processes.