The paper features a computational fluid dynamics study of a flapping NACA0015 hydrofoil moving with a combination of sinusoidal heaving and pitching. Several kinematic configurations are explored, varying sequentially pitch and heave amplitude, Strouhal number and phase angle, in an attempt to determine the influence of each parameter on the propulsive performance. To optimize efficiency the angle of attack should assume the highest value that also avoids the arise of the leading edge vortex generated in the dynamic stall state. At low Strouhal number optimum is reached at high heave amplitudes, which correspond to the configurations minimizing the hysteresis in the plane. The same outcome in terms of hysteresis minimization has been verified to occur when optimal phase shift was considered. Differently, when the Strouhal number and the angle of attack become higher, to exploit efficiently the lift increment owed to dynamic stall it emerged the necessity of adopting low heave amplitude to improve separation resistance, avoiding the occurrence of deep stall.
Numerical simulations based on a high-order discontinuous Galerkin solver were performed to investigate two-dimensional flapping foils at moderate Reynolds numbers, moving with different prescribed harmonic motion laws. A Spalart–Allmaras RANS model with and without an algebraic local transition modification was employed for the resolution of multiple kinematic configurations, considering both moderate-frequency large-amplitude flapping and high-frequency small-amplitude pure heaving. The propulsive performance of the airfoils with the two modelling approaches were tested by referring to experimental and (scale-resolving) numerical data available in the literature. The results show an increase in effectiveness in predicting loads when applying the transition model. This is particularly true at low Strouhal numbers when, after laminar separation at the leading edge, vorticity dynamics appears to have a strong effect on the forces exerted on the profile. Specifically, the transition model more accurately predicts the wake topology emerging in the flow field, which is the primary influence on thrust/drag generation.
A high-order modal discontinuous Galerkin framework, embedding an efficient strategy to ensure entropy conservation/stability at discrete level, is here exploited to perform highly challenging implicit large eddy simulations of turbulent channel flows. Together with more explored incompressible configurations, the numerical scheme is also tested for several highly compressible cases. Such simulations are undertaken in conditions of both moderate and extreme under-resolution, up to reaching discrete solutions that employ approximately 1/2000 of the degrees of freedom of the reference direct numerical simulation. We show that the numerical properties of the framework may be leveraged to impose a “correct” dissipation on the numerical solution in order to derive remarkably accurate results in condition of strong under-resolution. In the near-incompressible regime, optimal accuracy on poorly resolved space discretizations is obtained upon adoption of a low-dissipation entropy-conserving convective scheme, combined with suitably constructed wall boundary conditions. Conversely, for high-Mach number flows, the interplay of compressibility and under-resolution results in flow configurations that benefits from the implementation of a fully entropy-stable discretization of the convective terms. Overall, we are able to show that the entropy-aware framework is sufficiently robust to run challenging simulations with virtually no numerical dissipation, so that a fine-tuning of the latter may be suitably designed to achieve accurate results.