This article is devoted to modeling the pressing process of an experimental screw press for safflower oil production in small enterprises of the grain processing industry. The theoretical analysis for developing the process of oil pressing in a screw press is considered. Using methods of mathematical modeling, the problem of squeezing the liquid phase from dispersed material is described and solved. The basic scheme and characteristics of the press equipment and the principle of its work are presented. The proposed method of the theoretical calculation of the pressing process helps to determine the optimal parameters and to press safflower oil using the proposed design of the screw press. During the process of pressing, the highest value of oil yield is reached at the diaphragm gap of δ = 0.1 mm and screw rotation speed of ω = 6.2 rad/s.

This study investigated the physicochemical properties of meat patties, comparing a control sample and an experimental sample with the addition of 10% oleogel. The experimental sample showed a reduction in protein content (19.47%) and fat (18.37%) compared with the control sample (20.47% and 19.95%, respectively), accompanied by an increase in carbohydrates (2.56% vs. 1.65%). The fatty acid composition analysis revealed that the inclusion of oleogel significantly increased the content of polyunsaturated fatty acids (PUFAs) from 12.458% to 18.94%. Saturated fatty acids (SFAs), such as capric, lauric, myristic, and stearic acids, were markedly reduced, while the level of linoleic acid increased, indicating an improved and balanced fatty acid profile in the experimental patties. The moisture-binding capacity of the experimental sample was determined to be 75.54%, a 2.53% improvement over the control one. Microstructural analysis found no significant differences between the control and experimental samples, with no large oleogel particles visible. Overall, the substitution of pork fat with oleogel did not adversely affect key physicochemical properties, such as pH and moisture-binding capacity, or the structural integrity of the beef patties. These findings suggest that oleogel can be used effectively as a fat substitute in meat products, enhancing their nutritional profile without compromising quality.

Safflower oil is a very valuable product for the body and human health. It is rich in macro- and microelements, vitamins and minerals, and also has antioxidant properties. The primary purification of safflower oil is an important stage of its production and directly affects the quality of the final product and its storage ability. Purifying safflower oil using a combination of filtration and sedimentation processes in an experimental cone-shaped centrifuge is a new direction in its processing. The purpose of this study was to determine the effects of flax fiber as a filter material for safflower oil. The Akmai variety of the safflower was tested. The results showed that the quality indicators of safflower oil before and after filtration through flax fiber are different. The amount of unsaturated fatty acids such as oleic (18.31 ± 0.874%) and cis-linoleic acid (82.52 ± 1.854%) increased, as well as the content of arginine (2.1), tyrosine (0.57), methionine (0.4), cystine (2.5), tryptophan (2.6), and other amino acids (in oil g per 100 g of protein). The increase in the total amount of phenols (322.12 ± 6 mgEAG/kg of oil) was observed, which directly caused the higher antioxidant activity (42.65 ± 8%) of the safflower oil. These results demonstrate that flax fiber can enrich safflower oil. To find the optimal conditions for safflower oil centrifugation in a cone-shaped sedimentary-filtering centrifuge, the thickness of the flax fiber and the distance between the inner and outer perforated filter rotor were tested. It was found that the optimal and effective thickness of the flax fiber is 1.5 × 10⁷ nm, while the thickness of the sediment is 0.5 × 10⁷ nm.

Перспективное отечественное растительное масло и его качественные характеристики

This study investigates the dry pneumatic separation of wheat flour using a newly designed rotating air classifier to obtain starch- and protein-enriched fractions. The process is based on differences in particle density and size, enabling separation without water or chemical reagents. The influence of key process parameters, including air flow velocity 6–12 m/s, classifier geometry, and particle size distribution, was investigated. Statistical analysis confirmed that the air flow velocity and orifice diameter significantly affect the separation efficiency. The optimal conditions of 9–10 m/s and 1.8 mm resulted in a starch fraction with a purity of about 89% and a protein-enriched fraction containing approximately 45% protein. Regression models (R² > 0.99) demonstrated a strong relationship between the process parameters and fraction yield. Compared with conventional wet fractionation, the proposed method reduces energy consumption by approximately 28% and eliminates water use. These results confirm the feasibility of dry pneumatic classification as a sustainable and efficient technology for producing functional wheat-based ingredients. All experiments were conducted in triplicate (n = 3), and the results are presented as mean ± standard deviation. The reported yields correspond to the fraction mass, while the composition values indicate component purity within each fraction.

In the article the expert analytical review of literature sources on the basis of set tasks on realization of the purpose of increasing the efficiency of safflower oil purification using secondary raw materials of grain and oilseed crops processing is carried out, the object of research and the purpose of technology of effective purification of safflower oil are defined. Methods of using secondary raw materials as filtering materials were analyzed, linen fiber is proposed as an optimal filtering material. Multifactorial experimental studies were carried out for the application of filtering material consisting of recycled processing raw materials in industrial equipment. We saw that when purification with filter media composed of recycled recycled processing raw materials, the safflower oil yield increased due to pump pressure. Under the influence of the pump pressure of 180-10-3 Pa, we can relate that the oil yield decreased and the capacity of the filter media decreased, and we can see that the safflower oil yield also increased due to the increase in filtration rate. As a result of filtering safflower oil through linseed fiber in a frame filter with a filtration rate of 0.1 L/s, the safflower oil yield increased to 93%. As a result of the study of fatty acid, inorganic composition and the amount of vitamens of safflower oil, we see a decrease in the content of saturated fatty acids and an increase in the content of mono- and polyunsaturated acids (oleic, behenic, cis-10-heptadecenoic and cis-linoleic acids), and we also observe that the inorganic composition meets all the norms, and the content of vitamin E increases.In the research work, frame filter press of FPR brand is used for purification of vegetable oil. As a result, the parametric dependencies of effective purification of safflower oil using filtering materials consisting of secondary raw materials of processing in a frame row filter press are substantiated and a rational solution for application in production is found.