The production technology of meat-bone paste and its effect on chemical, mineral and amino acid compositions of liver pâté were studied. The liver was replaced by meat-bone paste in the concentration of 5, 10, 15, 20, and 25% for the production of experimental samples. The compositional analysis of pâté manufactured with meat-bone paste showed that the reformulation did not influence the content of moisture (~56%), fat (~28%), or protein (~11%) while producing a significant increase of ash and a decrease of carbohydrates in comparison with control pâtés. The higher amounts of minerals of bone-meat paste, including calcium (3080 mg/100 g), magnesium (2120 mg/100 g), phosphorous (2564 mg/100 g), and iron (7.30 mg/100 g), explained the higher amount of both ash and these minerals in the reformulated samples compared to the control samples. The total caloric value (~300 kcal/100 g) was also unaffected by the addition of bone-meat paste. The content of both essential and non-essential amino acids decreased with the inclusion of meat-bone paste, although this decrease was lower in essential (6280 mg/100 g in control vs. 5756 mg/100 g in samples with 25% of meat-bone paste) than in non-essential amino acids (6080 mg/100 g in control vs. 3590 mg/100 g in samples with 25% of meat-bone paste). This fact is due to several essential amino acids not showing differences between control and reformulated samples, while in non-essential amino acids, these differences were greater. The results of this study showed that meat-bone paste addition is a good strategy to produce liver pâté enriched in minerals and with minimum influence on the content of the other important nutrients. Therefore, these results can be used for the design of new liver pâté with an increased nutritional significance by using meat industry by-products. According to the balance of minerals, the use of 15% of meat-bone paste to reformulate liver pâté is the best strategy used in the present research. However, additional studies on the stability (during storage), shelf-life, and sensory acceptability of these reformulated pâtés should be carried out.

The primary objective of this study was to investigate the survival rate of three species of encapsulated bacteria (Propionibacterium acidipropionicici, Propionibacterium freudenreichii, and Propionibacterium thoenii) in model solutions designed to simulate the acidity levels found within the human gastrointestinal tract. The capsules were prepared by extrusion from gelatin and sodium alginate in a 1:1 ratio on a laboratory encapsulator. The use of gelatin and sodium alginate was found to provide optimum characteristics suitable for encapsulation of live bacteria. Three strains of Propionibacterium asidirgorionici, Propionibacterium freudenreichii, and Propionibacterium thoenii were subjected to in vitro assay to evaluate their probiotic potential. The final cell survival rate of P. freudenreichii was 10⁵ CFU/mL, indicating that this probiotic is sensitive to acidic medium. The viability of encapsulated probiotics was studied in a model medium simulating the gastrointestinal tract. It was found that alginate–gelatin capsules could provide protection to P. freudenreichii from gastric acid and lead to high levels of viable bacteria released in the intestine. Practical application: Encapsulation of Propionibacterium freudenreichii into alginate–gelatin capsules produced capsules capable of delivering live probiotic bacteria into the intestine.

This article is devoted to modeling the pressing process of an experimental screw press for safflower oil production in small enterprises of the grain processing industry. The theoretical analysis for developing the process of oil pressing in a screw press is considered. Using methods of mathematical modeling, the problem of squeezing the liquid phase from dispersed material is described and solved. The basic scheme and characteristics of the press equipment and the principle of its work are presented. The proposed method of the theoretical calculation of the pressing process helps to determine the optimal parameters and to press safflower oil using the proposed design of the screw press. During the process of pressing, the highest value of oil yield is reached at the diaphragm gap of δ = 0.1 mm and screw rotation speed of ω = 6.2 rad/s.

In food processing, enzymatic hydrolysis has become a revolutionary biotechnological instrument that provides consistency and sustainability that are unmatched by traditional techniques. This work thoroughly analyzes current developments in enzymatic hydrolysis and examines its uses in various food processing contexts. The biotechnological aspects—such as substrate specificity, enzyme engineering, and sustainable process optimization—are the main focus. The historical background and development of enzymatic hydrolysis in food processing are explored at the study's outset, highlighting the process's transformation from a specialized use to a critical component of contemporary biotechnological food production. A thorough literature review underscores the specificity of enzymes in dissolving various dietary components, offering insights into the biotechnological nuances controlling substrate-enzyme interactions. A careful examination of the many enzymes used in enzymatic hydrolysis and a full assessment of their uses and specificities are provided. Enzymatic hydrolysis selection criteria are outlined, taking regulatory compliance, thermostability, pH sensitivity, and substrate specificity into account. The integration of enzymatic hydrolysis into workflows for food processing is also covered, focusing on compatibility with current infrastructure and processing parameters. The case studies that demonstrate the effective use of enzymatic hydrolysis in various food production situations are the core of the research. These examples illustrate the adaptability and effectiveness of enzymatic processes in improving food quality, from developing gluten-free products to optimizing fermentation in baked goods. In its futuristic conclusion, the article imagines how enzymatic hydrolysis will continue to influence food processing in the years to come. The biotechnological viewpoint strongly emphasizes current research directions, such as integrating enzymatic processes into sustainable food production techniques and engineering enzymes for increased specificity. This biotechnological investigation highlights how enzymatic hydrolysis may completely change the food processing industry by providing accuracy, sustainability, and creativity in pursuing wholesome, nutrient-dense, and aesthetically pleasing food items.

This study aimed to investigate the effect of adding amaranth flour to meat patties on their chemical composition. Four different variations of meat patties were prepared, with amaranth flour added at concentrations of 5%, 10%, and 15% in place of beef. The control sample was prepared without any addition. The results of the study showed that the addition of amaranth flour led to a significant decrease in the moisture content of the meat patties, while the proportions of carbohydrates, fat, and ash increased. Specifically, the patties with the highest concentration of amaranth flour (15%) had the highest proportions of carbohydrates and fat with the lowest proportion of moisture. The control sample had the highest moisture content and the lowest proportion of carbohydrates, fat, and ash. The addition of amaranth flour increased the water-holding capacity of the meat patties, with the highest increase observed in the sample with 15% amaranth flour (82.21%). The overall score of sensory evaluation of the meat patties did not significantly decrease with the addition of up to 10% amaranth flour, according to the sensory evaluation. The study provides evidence that up to 10% amaranth flour can be used as a substitute for beef in meat patties, which can lead to an increase in the fat and carbohydrate content and mineral composition and improvement of the water-holding capacity of the final product.

The paper investigates the mathematical modeling of anaerobic fermentation for the utilization of animal wastes. It analyzes various approaches to the mathematical modeling of anaerobic digestion processes. However, most of the models previously proposed do not take into account a number of key parameters such as the levels of micro and macronutrientls (such as K, Na, Ca, Mg, Mo, etc.), values of volatile fatty acids, C/N ratio, pH levels, extent of grinding, moisture, and others. This paper proposes a new mathematical model of anaerobic fermentation under industrial scale conditions. The model was developed on the basis of regression analysis and correlation. It found empirical relationships between biogas yield and 26 different parameters. These parameters are measured by appropriate biosensors in industrial production. Some of them have more significant influence on the fermentation process than others. Overall, the developed mathematical model has the potential to provide useful insights into biogas production and can be used to optimize anaerobic fermentation processes.