With the proposal of China’s national “double carbon” strategic goal, carbon capture, utilization and storage (CCUS) technology has attracted more and more attention. Due to the high cost, high energy consumption and high risk of CCUS technology, this technology is still in the initial stage of development in China. Among them, CO₂ geological storage is one of the risks, and the environmental monitoring technology of CO₂ storage leakage is particularly important in the large-scale popularization and application of CCUS technology in China. On the basis of extensive research on the related literature concerning CO₂ storage and leakage, this paper begins with the types and mechanisms of CO₂ storage, analyzes the ways and risks of CO₂ storage and leakage and then summarizes the existing environmental monitoring technologies of CO₂ geological storage and leakage. In the future, China can promote the progress of CO₂ geological storage monitoring technology and help achieve the goal of “double carbon” by strengthening the research on CO₂ storage mechanism and main control factors, perfecting the risk assessment method of CO₂ storage, constructing the monitoring technology system of the CO₂ storage life cycle, and standardizing the CO₂ storage risk response system.

CO₂-enhanced coalbed methane recovery (CO₂-ECBM) represents a promising pathway within carbon capture, utilization, and storage (CCUS) technologies, offering dual benefits of methane production and long-term CO₂ sequestration. This review provides a comprehensive analysis of CO₂-ECBM from a full-chain perspective (Mechanism, Practices, and Outlook), covering fundamental mechanisms and key engineering practices. It highlights the complex multi-physics processes involved, including competitive adsorption–desorption, diffusion and seepage, thermal effects, stress responses, and geochemical interactions. Recent progress in laboratory experiments, capacity assessments, site evaluations, monitoring techniques, and numerical simulations are systematically reviewed. Field studies indicate that CO₂-ECBM performance is strongly influenced by reservoir pressure, temperature, injection rate, and coal seam properties. Structural conditions and multi-field coupling further affect storage efficiency and long-term security. This work also addresses major technical challenges such as real-time monitoring limitations, environmental risks, injection-induced seismicity, and economic constraints. Future research directions emphasize the need to deepen understanding of coupling mechanisms, improve monitoring frameworks, and advance integrated engineering optimization. By synthesizing recent advances and identifying research priorities, this review aims to provide theoretical support and practical guidance for the scalable deployment of CO₂-ECBM, contributing to global energy transition and carbon neutrality goals.

Supercritical CO₂ modifies deep coal reservoirs through the coupled effects of adsorption-induced deformation and geochemical dissolution. CO₂ adsorption causes coal matrix swelling and facilitates micro-fracture propagation, while CO₂–water reactions generate weakly acidic fluids that dissolve minerals such as calcite and kaolinite. These synergistic processes remove pore fillings, enlarge flow channels, and generate new dissolution pores, thereby increasing the total pore volume while making the pore–fracture network more heterogeneous and structurally complex. Such reservoir restructuring provides the intrinsic basis for CO₂ injectivity and subsequent CH₄ displacement. Both adsorption capacity and volumetric strain exhibit Langmuir-type growth characteristics, and permeability evolution follows a three-stage pattern—rapid decline, slow attenuation, and gradual rebound. A negative exponential relationship between permeability and volumetric strain reveals the competing roles of adsorption swelling, mineral dissolution, and stress redistribution. Swelling dominates early permeability reduction at low pressures, whereas fracture reactivation and dissolution progressively alleviate flow blockage at higher pressures, enabling partial permeability recovery. Injection pressure is identified as the key parameter governing CO₂ migration, permeability evolution, sweep efficiency, and the CO₂-ECBM enhancement effect. Higher pressures accelerate CO₂ adsorption, diffusion, and sweep expansion, strengthening competitive adsorption and improving methane recovery and CO₂ storage. However, excessively high pressures enlarge the permeability-reduction zone and may induce formation instability, while insufficient pressures restrict the effective sweep volume. An optimal injection-pressure window is therefore essential to balance injectivity, sweep performance, and long-term storage integrity. Importantly, the enhanced methane production and permanent CO₂ storage achieved in this study contribute directly to greenhouse gas reduction and improved sustainability of subsurface energy systems. The multi-field coupling insights also support the development of low-carbon, environmentally responsible CO₂-ECBM strategies aligned with global sustainable energy and climate-mitigation goals. The integrated experimental–numerical framework provides quantitative insight into the coupled adsorption–deformation–flow–geochemistry processes in deep coal seams. These findings form a scientific basis for designing safe and efficient CO₂-ECBM injection strategies and support future demonstration projects in heterogeneous deep coal reservoirs.