Herein, we carefully investigate the effect of nitrogen doping in the equiatomic CoCrFeMnNi high-entropy alloy (HEA) on the microstructure evolution and mechanical properties. After homogenization (1100 °C for 20 h), cold-rolling (reduction ratio of 60%) and subsequent annealing (800 °C for 1 h), a unique complex heterogeneous microstructure consisting of fine recrystallized grains, large non-recrystallized grains, and nanoscale Cr2N precipitates, were obtained in nitrogen-doped (0.3 wt.%) CoCrFeMnNi HEA. The yield strength and ultimate tensile strength can be significantly improved in nitrogen-doped (0.3 wt.%) CoCrFeMnNi HEA with a complex heterogeneous microstructure, which shows more than two times higher than those compared to CoCrFeMnNi HEA under the identical process condition. It is achieved by the simultaneous operation of various strengthening mechanisms from the complex heterogeneous microstructure. Although it still has not solved the problem of ductility reduction, as the strength increases because the microstructure optimization is not yet complete, it is expected that precise control of the unique complex heterogeneous structure in nitrogen-doped CoCrFeMnNi HEA can open a new era in overcoming the strength–ductility trade-off, one of the oldest dilemmas of structural materials.
16 February 2023 in Journal of Alloys and Compounds
In order to replace the conventional alloys with bulk metallic glasses (BMGs), studies have been actively conducted to investigate the mechanical characteristics of BMGs in various aspects. One of the major ongoing issues is process-related variations in key properties such as fracture toughness. Although there is still a lack of knowledge on how to prevent catastrophic failure in most BMGs, Griffith’s theory, modified by Irwin and Orowan, allows us to understand that the dissipation of plastic energy by atomic rearrangement within the shear band is a key factor in designing damage-tolerant BMGs by preventing crack opening. In this article, we discuss the fracture behavior of BMGs in relation to Griffith’s theory and review studies that examined how intrinsic and extrinsic factors, such as alloy composition, temperature, sample size, and strain rate affect the brittle–ductile transitions in BMGs. As several BMGs recently reported excellent fracture toughness similar to that of ductile alloys such as conventional low-carbon steels, damage-tolerant BMGs will be a new class of high-performance structural engineering materials with significant technological strengths. Graphical abstract