Acceleration of positive muons from thermal energy to 100 keV has been demonstrated. Thermal muons were generated by resonant multiphoton ionization of muonium atoms emitted from a sheet of laser-ablated aerogel. The thermal muons were first electrostatically accelerated to 5.7 keV, followed by further acceleration to 100 keV using a radio-frequency quadrupole with an intensity of 2 × 10 − 3 μ + / pulse . The transverse normalized rms emittance of the accelerated muons in the horizontal and vertical planes were 0.85 ± 0.25 ( s t a t ) − 0.13 + 0.22 ( syst ) π mm mrad and 0.32 ± 0.03 ( stat ) − 0.02 + 0.05 ( syst ) π mm mrad , respectively. The measured emittance values demonstrated phase-space reduction by a factor of 2.0 × 10 2 (horizontal) and 4.1 × 10 2 (vertical) allowing good acceleration efficiency. These results pave the way to realize the first-ever muon accelerator for a variety of applications in particle physics, material science, and other fields. Published by the American Physical Society 2025
7 November 2022 in Physical Review Accelerators and Beams
We conducted a high-power test of a prototype cavity of a 324-MHz interdigital H-mode drift tube linac (IH-DTL) for the precise measurement of the muon anomalous magnetic moment () and electric dipole moment (EDM). This prototype cavity (short IH) was developed to verify the fabrication methodology for the IH-DTL cavity with a monolithic drift tube structure. The electromagnetic field distribution was measured and compared with the finite element method simulation results, and the fabrication accuracy of the monolithic drift tube was confirmed to satisfy the requirements. After 40 h of conditioning, the short IH was stably operated with an rf power of 88 kW, which corresponds to a 10% higher accelerating field than the design field () of . In addition, the thermal characteristics and frequency response were measured, verifying that the experimental data were consistent with the three-dimensional model. In this paper, the design, fabrication, and low-power and high-power tests of this IH-DTL for muon acceleration are described.
12 February 2020 in Physical Review Accelerators and Beams
A destructive monitor to measure the longitudinal bunch width of a low-energy and low-intensity muon beam was developed. This bunch-width monitor (BWM) employed microchannel plates to detect a single muon with high time resolution. In addition, constant-fraction discriminators were adopted to suppress the time-walk effect. The time resolution was measured to be 65 ps in rms using a picosecond-pulsed laser. This resolution satisfied the requirements of the muon linac of the J-PARC E34 experiment. We measured the bunch width of negative-muonium ions () accelerated with a radio-frequency quadrupole using the BWM. The bunch width was successfully measured to be , which is consistent with the simulation.
3 November 2022 in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
The muon anomalous magnetic moment () measurement at the Fermilab National Accelerator Laboratory (FNAL-E989) is consistent with a previous experiment at the Brookhaven National Laboratory (BNL-E821), and these results show a deviation of 4.2 standard deviations from the prediction of the Standard Model. This deviation may suggest the existence of unknown particles, and a completely different approach from previous experiments is needed for further verification. The J-PARC experiment’s objective is to measure the muon g-2 and the electric dipole moment (EDM) with high precision using a new method with a low-emittance muon beam generated by RF linear acceleration. In this paper, the development of an interdigital H-mode drift tube linac (IH-DTL) for the muon linear accelerator is described.
1 September 2026 in Physical Review Accelerators and Beams
We have constructed a 324-MHz interdigital H -mode drift tube linear accelerator (IH-DTL) with an alternating phase focusing method. This IH-DTL will be part of a muon linear accelerator (linac) being developed at the Japan Proton Accelerator Research Complex for a precise measurement of the muon anomalous magnetic moment and a search for the muon electric dipole moment. The IH-DTL is 1.45 m long and accelerates muons from β = v / c = 0.08 to 0.28. Low-power tuning was performed using six slug tuners, which reduced the peak-to-peak on-axis field error to 1.4 % . Following 94 h of high-power conditioning, the IH-DTL demonstrated stable operation at the nominal peak power of 390 kW and a duty factor of 0.1%, corresponding to the designed accelerating field ( E 0 ) of 3.6 MV / m . This paper presents the construction, low-power rf tuning, and high-power performance of the 324-MHz IH-DTL.