Layered semiconductor gallium telluride (GaTe) undergoes a rapid structural transition to a degraded phase in ambient conditions, limiting its utility in devices such as optical switches. In this work, we demonstrate that the degradation process in GaTe flakes can be slowed down dramatically via encapsulation with graphene. Through examining Raman signatures of degradation, we show that the choice of substrate significantly impacts the degradation rate and that the process is accelerated by the transfer of GaTe to hydrophilic substrates such as SiO2/Si. We find that double encapsulation with both top and bottom graphene layers can extend the lifetime of the material for several weeks. The photoresponse of flakes encapsulated in this way is only reduced by 17.6 ± 0.4% after 2 weeks, whereas unencapsulated flakes display no response after this time. Our results demonstrate the potential for alternative, van der Waals material-based passivation strategies in unstable layered materials and highlight the need for careful selection of substrates for 2D electronic devices.
The direct integration of GaN with Si can boost great potential for low-cost, large-scale, and high-power device applications. However, it is still challengeable to directly grow GaN on Si without using thick strain relief buffer layers due to their large lattice and thermal-expansion-coefficient mismatches. In this work, a GaN/Si heterointerface without any buffer layer is fabricated at room temperature via surface activated bonding (SAB). The residual stress states and interfacial microstructures of GaN/Si heterostructures were systematically investigated through micro-Raman spectroscopy and transmission electron microscopy. Compared to the large compressive stress that existed in GaN layers grown on Si by metalorganic chemical vapor deposition, a significantly relaxed and uniform small tensile stress was observed in GaN layers bonded to Si by SAB; this is mainly ascribed to the amorphous layer formed at the bonding interface. In addition, the interfacial microstructure and stress states of bonded GaN/Si heterointerfaces was found to be significantly tuned by appropriate thermal annealing. With increasing annealing temperature, the amorphous interlayer formed at the as-bonded interface gradually transforms into a thin crystallized interlayer without any observable defects even after annealing at 1000 °C, while the interlayer stresses at both GaN layer and Si monotonically change due to the interfacial re-crystallization. This work moves an important step forward directly integrating GaN to the present Si CMOS technology with high quality thin interfaces and brings great promises for wafer-scale low-cost fabrication of GaN electronics.
Two-dimensional materials are expected to play an important role in next-generation electronics and optoelectronic devices. Recently, twisted bilayer graphene and transition metal dichalcogenides have attracted significant attention due to their unique physical properties and potential applications. In this study, we describe the use of optical microscopy to collect the color space of chemical vapor deposition (CVD) of molybdenum disulfide (MoS2) and the application of a semantic segmentation convolutional neural network (CNN) to accurately and rapidly identify thicknesses of MoS2 flakes. A second CNN model is trained to provide precise predictions on the twist angle of CVD-grown bilayer flakes. This model harnessed a data set comprising over 10,000 synthetic images, encompassing geometries spanning from hexagonal to triangular shapes. Subsequent validation of the deep learning predictions on twist angles was executed through the second harmonic generation and Raman spectroscopy. Our results introduce a scalable methodology for automated inspection of twisted atomically thin CVD-grown bilayers.