This paper proposes a neural network-based nonsingular terminal sliding mode controller with prescribed performances for the target tracking problem of underactuated underwater robots. Firstly, the mathematical formulation of the target tracking problem is presented with an underactuated underwater robot model and the corresponding control objectives. Then, the target tracking errors from the line-of-sight guidance law are transformed using the prescribed performance technique to achieve good dynamic performance and steady-state performance that meet the pre-set conditions. Meanwhile, considering the model’s uncertainties and the external disturbances to the underwater robots, a target tracking controller is proposed based on the radial basis function (RBF) neural network and the non-singular terminal sliding mode control. Lyapunov stability analysis and homogeneity theory prove the tracking errors can converge on a small region that contains the origin with prescribed performance in finite time. In the simulation comparison, the controller proposed in this paper had better dynamic performance, steady-state performance and chattering supression. In particular, the steady-state error of the tracking error was lower, and the convergence time of the tracking error in the vertical distance was reduced by 19.1%.

The accurate target detection under different environmental conditions and the real-time target positioning are vital for the successful accomplishment of underwater missions of Remotely operated vehicles (ROVs). In this paper, we propose a vision-based underwater target detection and positioning approach to detect and estimate the position and attitude of artificial underwater targets. The proposed approach is composed of an underwater target detection algorithm YOLO-T and a target positioning algorithm. Firstly, we modify the structure of YOLOv5 algorithm using Ghost module and SE attention module to improve the calculation time of target detection. Secondly, a series of image processing operations are performed on the improved YOLOv5 detection results to increase the detection accuracy. Thirdly, a cooperative marker is designed as the artificial underwater target, and the corresponding positioning algorithm is presented to calculated the position and attitude of the target according to the geometric information of the designed marker. We test our approach through experimental tests a water tank in the laboratory, an anechoic tank and the sea trial in the Huanghai sea in China. The results demonstrate the accurate performance of the proposed detection and positioning method.

This paper proposes a trajectory tracking control scheme consisting of a fast finite-time super-twisting sliding mode control (FSTSMC) approach and an extended state higher-order sliding mode observer (ESHSMO) for unmanned underwater vehicles (UUVs) with external disturbances and model uncertainties. Firstly, an extended state higher-order sliding mode observer with the finite-time convergence is designed based on the higher-order sliding mode technique and the extended state observer technique. Next, on the basis of disturbances and model uncertainties observation, a fast finite-time super-twisting sliding mode control approach is proposed, and the finite time stabilization property of the tracking errors is proved by Lyapunov theory. Finally, through numerical simulation and experiment in a water pool, it has been verified that the proposed control scheme has achieved the high control precision, the smaller chattering, the disturbance compensation and the fast finite-time convergence in UUV trajectory tracking.

This paper proposes a novel underwater dexterous hand structure whose fingertip is equipped with underwater tactile force sensor (UTFS) array to realize the grasping sample location determination and force perception. The measurement structure, theoretical analysis, prototype development and experimental verification of the UTFS are purposefully studied in order to achieve accurate measurement under huge water pressure influence. The UTFS is designed as capsule shape type with differential pressure structure, and the external water pressure signal is separately transmitted to the silicon cup bottom which is considered to be an elastomer with four strain elements distribution through the upper and lower flexible contacts and the silicone oil filled in the upper and lower cavities of UTFS. The external tactile force information can be obtained by the vector superposition between the upper and lower of silicon cup bottom to counteract the water pressure influence. The analytical solution of deformation and stress of the bottom of the square silicon cup bottom is analyzed with the use of elasticity and shell theory, and compared with the Finite Element Analysis results, which provides theoretical support for the distribution design of four strain elements at the bottom of the silicon cup. At last, the UTFS zero drift experiment without force applying under different water depths, the output of the standard force applying under different water depth and the test of the standard force applying under conditions of different 0 ${}^{\circ }$C–30 ${}^{\circ }$C temperature with 0.1 m water depth are carried out to verify the performance of the sensor. The experiments show that the UTFS has a high linearity and sensitivity, and which has a regular zero drift and temperature drift which can be eliminated by calibration algorithm.

In this paper, the precise control of the underwater manipulator has studied under the conditions of uncertain underwater dynamics and time-varying external interference. An improved adaptive model predictive control (MPC) method is proposed for a multiple-degrees-of-freedom (DOF) underwater manipulator. In this method, the Gaussian process regression (GPR) algorithm has been embedded into the precise trajectory tracking control of the underwater manipulator. The GPR algorithm has been used to predict the water resistance, additional mass, buoyancy and external interference in real time, and the control law has been calculated by the terminal constraint MPC to realize the adaptive internal and external interference compensation. In addition, a more accurate dynamic model of the underwater 6-DOF manipulator is established by combining Lagrange equation with Morrison formula. Finally, the effectiveness of the adaptive MPC using GPR method is verified by a series of comparative simulations.

Underwater target detection technology plays a crucial role in the autonomous exploration of underwater vehicles. In recent years, significant progress has been made in the field of target detection through the application of artificial intelligence technology. Effectively applying AI techniques to underwater target detection is a highly promising area of research. However, the difficulty and high cost of underwater acoustic data collection have led to a severe lack of data, greatly restricting the development of deep-learning-based target detection methods. The present study is the first to utilize diffusion models for generating underwater acoustic data, thereby effectively addressing the issue of poor detection performance arising from the scarcity of underwater acoustic data. Firstly, we place iron cylinders and cones underwater (simulating small preset targets such as mines). Subsequently, we employ an autonomous underwater vehicle (AUV) equipped with side-scan sonar (SSS) to obtain underwater target data. The collected target data are augmented using the denoising diffusion probabilistic model (DDPM). Finally, the augmented data are used to train an improved YOLOv7 model, and its detection performance is evaluated on a test set. The results demonstrate the effectiveness of the proposed method in generating similar data and overcoming the challenge of limited training sample data. Compared to models trained solely on the original data, the model trained with augmented data shows a mean average precision (mAP) improvement of approximately 30% across various mainstream detection networks. Additionally, compared to the original model, the improved YOLOv7 model proposed in this study exhibits a 2% increase in mAP on the underwater dataset.