Na2O is an alkaline oxide, which can significantly improve the dephosphorization ability of converter slag. The effect of Na2O on the dephosphorization of converter slag was analyzed with a high-temperature dephosphorization experiment in a MoSi2 resistance furnace. We found that the dephosphorization rate increased with the increase of (Na2O) in the dephosphorization slag. The elements of Ca, Si, O, and P in the dephosphorization slag are distributed in the same area, mainly in the form of phosphate minerals, such as Ca2SiO4·0.05Ca3(PO4)2 and 6Ca2SiO4·Ca3(PO4)2. After adding Na2O, part of the Na will replace the Ca in the phosphorus-containing phase to form Ca2SiO4·Ca2Na2(PO4)2. The industrial test showed that the average dephosphorization rate in the early stage of the test heats with the CaO-MgO-FeO-SiO2-0.5%Na2O slag system could reach 62.39%, which was 19.62% higher than that of the conventional heats. The average basicity of the final slag was 0.19% lower than that of the conventional heats, while w(P2O5) increased by 0.36%, and T.Fe decreased by 0.69%. The average consumption of the slagging materials was 35.93 kg/t, which was 7.24 kg/t less than that of the conventional heats. Through thermodynamic calculation, we found that with the increase of (Na2O), the phosphorus distribution ratio between slag and steel increased significantly, the area of the liquid phase zone of the slag system increased continuously, and the viscosity decreased continuously.
Magnetite (Fe3O4) is an essential material for enhancing microwave absorption performance and is widespread and abundant as a solid solution in natural minerals and metallurgical slags. In this work, the effect of Mg2+ on the structure, stabilization, and microwave absorption performance of magnesium-containing magnetite (MgxFe3−xO4) was investigated. On the basis of experiments on the reactions of Fe2O3 and MgO under different levels of pCO/(pCO + pCO2), MgxFe3−xO4 (x=0.0,0.2,0.4,0.6,1.0) was synthesized, and Mg2+ was found to inhibit the re-oxidation of magnetite. On this basis, the microwave absorption performance of various synthesized MgxFe3−xO4 samples was measured and analyzed, where Mg2+ was found to enhance the microwave absorption performance of Fe3O4, and the RLmin value of Mg0.2Fe2.8O4 increased to −50.43 dB compared to that of −19.20 dB for Fe3O4. Furthermore, the enhancement mechanism of Mg2+ was revealed through impedance matching, dielectric and magnetic loss tangents, and magnetization curves, where the Mg2+ ions were found to accelerate the hopping of electrons and change the impedance matching of MgxFe3−xO4 to a more ideal state.