In situ catalytic upgrading of heavy oil decomposes viscous heavy oil underground through a series of complex chemical and physical reactions with the aid of an injected catalyst, and permits the resulting lighter components to flow to the producer under a normal pressure drive. By eliminating or substantially reducing the use of steam, which is prevalently used in current heavy oil productions worldwide and is a potent source of contamination concerns if not treated properly, in situ catalytic upgrading is intrinsically environmental-friendly and widely regarded as one of the promising techniques routes to decarbonize the oil industry. The present review provides a state-of-the-art summarization of the technologies of in situ catalytic upgrading and viscosity reduction in heavy oil from the aspects of catalyst selections, catalytic mechanisms, catalytic methods, and applications. The various types of widely used catalysts are compared and discussed in detail. Factors that impact the efficacy of the in situ upgrading of heavy oil are presented. The challenges and recommendations for future development are also furnished. This in-depth review is intended to give a well-rounded introduction to critical aspects on which the in situ catalytic application can shed light in the development of the world’s extra heavy oil reservoirs.
Numerical reservoir simulation, which includes the construction and operation of a model that performs similarly to a real-world reservoir, is an effective method for exploring complex reservoir issues. Due to the complexity of constructing reservoir environments for experiments, numerical simulation is a vital method for studying flow behavior under reservoir conditions. In this study, a black-oil modeling simulator was used to construct, simulate, and evaluate a conceptual hydrocarbon reservoir model. The model evolved by drilling two production wells and one injection well in two cases. The first case consisted of two horizontal production wells and one injection well, while the second consisted of two vertical production wells and an injection well. In total, 25 simulation runs were performed, and the results showed that horizontal wells perform better than vertical wells in terms of productivity, with a field oil production total of 1,930,000 m3. This is significantly higher than vertical wells, which have a field oil production total of 1,890,000 m3 after 1840 days. The field recovery factor for horizontal wells was 41% and for vertical wells it was 39%, both of which were less than 50%. This indicates that the reservoir’s sweeping efficiency was minimal. To enhance sweeping efficiency, the water injection rate and number of injection wells should be increased, as well as well patterns and locations remodeled. It was also shown that as reservoir thickness increased, horizontal and vertical well productivity increased. In order to boost horizontal well productivity and increase field oil recovery above 50%, the horizontal well length should be increased to take up a wider area of the reservoir portion. On the other hand, well length may have no impact on vertical well production efficiency.
Shale oil reservoirs feature a considerable number of nanopores and complex minerals, and the impact of nano-pore confinement and pore types frequently poses challenges to the efficient development of shale oil. For shale oil reservoirs, CO2 flooding can effectively lower crude oil viscosity, enhance reservoir physical properties, and thereby increase recovery. In this paper, the CO2 displacement process in the nanoscale pores of shale oil was simulated through the molecular dynamic simulation method. The performance disparity of quartz and calcite slit nanopores was discussed, and the influences of nanoscale pore types and displacement rates on CO2 displacement behavior were further analyzed. The results demonstrate that the CO2 displacement processes of different inorganic pores vary. In contrast, the displacement efficiency of light oil components is higher and the transportation distance is longer. Intermolecular interaction has a remarkable effect on the displacement behavior of CO2 in nanopores. On the other hand, it is discovered that a lower displacement rate is conducive to the miscible process of alkane and CO2 and the overall displacement process of CO2. The displacement efficiency drops significantly with the increase in displacement velocity. Nevertheless, once the displacement speed is extremely high, a strong driving force can facilitate the forward movement of alkane, and the displacement efficiency will recover slightly.
The occurrence state of shale oil dictates its mobility and development potential, yet how distinct organic-mineral assemblages and pore structures control this occurrence in heterogeneous continental shales remains poorly understood. Taking the Qingshankou shale in the Songliao Basin as an example, this study integrates XRD, FE-SEM, rock pyrolysis, and 1D/2D NMR to elucidate the lithofacies characteristics under varying depositional environments and their control mechanisms on pore structures and shale oil occurrence. Results indicate that the Qingshankou shale underwent a freshwater to brackish and back to freshwater depositional evolution, with marine transgression causing episodic salinization. The freshwater stages are dominated by organic-rich argillaceous shale and felsic shale/mudstone containing predominantly Type Ⅱ₁ kerogen. The brackish water stage feature carbonate-enriched mixed mudstone with lower organic matter abundance. Pore type is dominated by feldspar intergranular pores, dissolution pores, and clay intragranular pores, with sizes primarily ranging from 0 to 1000 nm. Specifically, clay micropores (<30 nm) are abundant in argillaceous shales, primarily facilitating adsorbed oil retention, whereas 100–1000 nm pores promote free oil enrichment. Notably, mixed mudstone formed in brackish environments exhibits the poorest pore development, and carbonate minerals exert no significant influence. Overall, the felsic shales deposited in freshwater environments exhibit well-developed organic matter and felsic macropores, leading to high total oil content and an elevated free oil fraction. These findings elucidate how organic-inorganic components and pore structures control shale oil occurrence under varying depositional settings, thereby providing theoretical insights for understanding continental shale oil enrichment.