In situ catalytic upgrading of heavy oil decomposes viscous heavy oil underground through a series of complex chemical and physical reactions with the aid of an injected catalyst, and permits the resulting lighter components to flow to the producer under a normal pressure drive. By eliminating or substantially reducing the use of steam, which is prevalently used in current heavy oil productions worldwide and is a potent source of contamination concerns if not treated properly, in situ catalytic upgrading is intrinsically environmental-friendly and widely regarded as one of the promising techniques routes to decarbonize the oil industry. The present review provides a state-of-the-art summarization of the technologies of in situ catalytic upgrading and viscosity reduction in heavy oil from the aspects of catalyst selections, catalytic mechanisms, catalytic methods, and applications. The various types of widely used catalysts are compared and discussed in detail. Factors that impact the efficacy of the in situ upgrading of heavy oil are presented. The challenges and recommendations for future development are also furnished. This in-depth review is intended to give a well-rounded introduction to critical aspects on which the in situ catalytic application can shed light in the development of the world’s extra heavy oil reservoirs.
The successful development of shale oil in China has claimed that laminated shale is a favorable lithofacies for the effective extraction of petroleum. Clarifying the role of laminae in shale oil generation, migration, storage, and enrichment is urgent and important. Starting from the describing and classifying of the lamina, the common methods and terms used to delineate lamina types are briefly summarized. The results of different schemes are often mutually inclusive, which prompted scholars to work towards a unified division scheme. The influencing factors of oil retention in shale systems, including organic matter (OM) type, total organic carbon (TOC) content, OM maturity, mineral composition, pore structure, and preservation conditions, are systematically discussed. Subsequently, comparative work on source rock quality, reservoir properties, and hydrocarbon expulsion efficiency of shales with different laminar structures is carried out. The comparison results of shale with different rock structures reveal that the laminated shale has a high expulsion efficiency. However, the strong oil generation capacity and superior storage space of laminated shale synergistically control the considerable amount of retained oil in the shale system. Especially the oil mobility of laminated shale is also considered because of great pore size and pore connectivity. The fine evaluation of laminar structure and prediction of laminar distribution has great significance for the selection of shale oil “sweet spot area” or “sweet spot interval”.
For the lower Silurian Longmaxi marine shale reservoir in the Jiaoshiba area, Sichuan Basin, China, the traditional P-impedance ([ ]) is insensitive for predicting good reservoirs. As an integral indicator of borehole radioactivity that is substantially corresponding to the organic richness, the uranium curve is qualified to identify the abundance of organic matter. Therefore, to efficiently comprehend the shale distribution in the Jiaoshiba area, we have adopted a so-called pseudo-P-impedance ([ ]), which is constructed from the P-impedance and the uranium (U) log and spatially computed from impedance inversion of the zero-offset seismic. The [ ] log shows an obvious correlation with the organic richness of the shale. The thickness of the high-quality shale derived from the inverted [ ] cube shows a higher correlation with the log data compared to the traditional P-impedance cube. The distribution of predicted high-quality shale is strongly influenced by the fault systems: (1) Although the fault development zone might lead to a distorted image of the seismic and weak shale evaluation, the shale gas cannot be efficiently preserved in these places, and (2) high-quality shale reservoirs are mainly distributed in the not-faulted area and show a general northeast–southwest trend. Generally, the introduced [ ] inversion is suitable for the seismic frequency range and could be applied to other similar exploration areas.
Carbonate-rich shale in salt lakes has become a potential target for petroleum exploration. A full understanding of storage space development characteristics is the basis for the efficient development of this kind of shale. In this study, the complex mineral composition and multiple pore structure of a typical carbonate-rich shale from the Paleogene Xin’gouzui Formation in the Jianghan Basin were systematically analyzed. The mixed shale and dolomitic shale were the main lithofacies types in the study area. Both of them were dominated by interparticle (interP) pores. However, their pore sizes are noticeably different. Pores with a size of <100 nm are the main compositions of the mixed shale, with an average volume proportion of 78.24%. Conversely, the dolomitic shale develops mainly micro-sized pores and micro-fractures, with a ratio of 70.46%. The difference in pore structure for different types of shales is closely associated with mineral composition. When particles of different sizes are mixed, most of the interP pores are prone to be filled by fine minerals (e.g., clay), resulting in relatively small pore sizes for the mixed shale. Homogeneous carbonate minerals are favorable for the residual of larger size interP pores. However, recrystallization and secondary enlargement of carbonate minerals can also lead to a significant decrease in pore diameter of interP pores. With these results, a storage space development model for different lithofacies shales was established. This work is crucial to further reveal the reservoir mechanisms and hydrocarbon scales of an argillaceous dolomite reservoir.
Accurate evaluation of pore systems in shale reservoirs is critical for understanding fluid flow, gas storage capacity, and overall reservoir performance. Extensive research has been conducted on the micro- and nano-pore structure of shale reservoirs using various experimental methods and shale samples. However, discrepancies in sample preparation standards and experimental parameters—such as observation techniques and data interpretation—raise concerns about the reliability and comparability of these results across different shale reservoirs. This review systematically evaluates the current methods for characterizing shale pore systems, with particular emphasis on commonly used techniques such as scanning electron microscopy (SEM), gas adsorption, and CT scanning. Key challenges related to sample preparation (e.g., sample size) and experimental conditions (e.g., voltage and current) are discussed, as these factors can introduce significant inaccuracies into pore structure characterization, even for well-established methods. Additionally, we examine the difficulties in integrating these methods to achieve a comprehensive understanding of shale pore parameters, including the quantification of organic and inorganic porosity, full-scale pore size distribution, and pore connectivity. Addressing these challenges requires the establishment of standardized processing workflows to enhance the comparability of results and minimize experimental errors. We also highlight often-overlooked issues, such as the potential discrepancy between pore structures observed under laboratory conditions and those at in-situ depths. The review concludes with recommendations for future research, including the development of advanced experimental techniques and more efficient data processing strategies to improve pore characterization in shale reservoirs. This review provides a new perspective for future research and addresses a critical gap in understanding the impact of experimental conditions on pore structure characterization outcomes.